D. Shi

发表

Modeling fatigue crack growth for a through thickness crack: An out-of-plane constraint-based approach considering thickness effect

He Liu, Shaolin Li, Xiaoguang Yang, 2020 .

Evaluation of the influence of surface crack-like defects on fatigue life for a P/M nickel-based superalloy FGH96

Xiaoguang Yang, D. Shi, Yingli Shi, 2020 .

The effect of off-axis angles on the mesoscale deformation response and failure behavior of an orthotropic textile carbon-epoxy composite

Xiaoguang Yang, D. Shi, H. Qi, 2018, Composite Structures.

Improvement on the Modeling of Rate-Dependent Plasticity and Cyclic Hardening by Bodner-Partom Model

Xiaoguang Yang, D. Shi, Yan-rong Wang, 2005 .

Microstructural evolution and restoration of creep property for a damaged K403 alloy after rejuvenation heat treatments

Shaolin Li, Xiaoguang Yang, D. Shi, 2020, Rare Metals.

A physically based model for correlating the microstructural degradation and residual creep lifetime of a polycrystalline Ni-based superalloy

Shaolin Li, Xiaoguang Yang, D. Shi, 2019, Journal of Alloys and Compounds.

A physically based methodology for predicting anisotropic creep properties of Ni-based superalloys

Jia Huang, Xiaoguang Yang, D. Shi, 2016, Rare Metals.

Laser welding of a selective laser melted Ni-base superalloy: Microstructure and high temperature mechanical property

Xiaoguang Yang, D. Shi, Xiaoan Hu, 2019, Materials Science and Engineering: A.

Microstructure-sensitive modeling of competing failure mode between surface and internal nucleation in high cycle fatigue

Jia Huang, Xiaoguang Yang, D. Shi, 2020 .

The study of the relationship between life limiting factor and stress level for FGH96

Xiaoguang Yang, D. Shi, Yingli Shi, 2018 .

Influence of the different salt deposits on the fatigue behavior of a directionally solidified nickel-based superalloy

Shaolin Li, Xiaoguang Yang, D. Shi, 2016 .

Competing fatigue failure behaviors of Ni-based superalloy FGH96 at elevated temperature

Xiaoguang Yang, D. Shi, Guolei Miao, 2016 .

A novel fatigue life model considering surface-damage induced performance degradation

Shaolin Li, Xiaoguang Yang, D. Shi, 2020 .

Multiscale Investigation on Fatigue Properties and Damage of a 3D Braided SiC/SiC + PyC/SiC Composites in the Full Stress Range at 1300 °C

Xiaoguang Yang, D. Shi, R. Luo, 2021, Journal of the European Ceramic Society.

Computational method for the analysis of erosion-induced stress and damage in thermal barrier coatings

Shaolin Li, Xiaoguang Yang, D. Shi, 2019 .

Numerical investigation on the cracking behaviors of thermal barrier coating system under different thermal cycle loading waveforms

Shaolin Li, Xiaoguang Yang, D. Shi, 2018, Surface and Coatings Technology.

Effect of notch on fatigue behaviour of a directionally solidified superalloy at high temperature

J. K. Wang, Jia Huang, Xiaoguang Yang, 2013 .

An improved viscoplastic constitutive model and its application to creep behavior of turbine blade

Shaolin Li, Xiaoguang Yang, D. Shi, 2017 .

The influence of temperature and orientation on fatigue crack growth behavior of a directional solidification nickel-based superalloy: Experimental investigation and modelling

Shaolin Li, Xiaoguang Yang, D. Shi, 2019, International Journal of Fatigue.

A modern and robust methodology for modeling anisotropic creep characteristics of Ni-based DS and SC superalloys

Jia Huang, Xiaoguang Yang, D. Shi, 2014 .

Systematic methodology for high temperature LCF life prediction of smooth and notched Ni-based superalloy with and without dwells

Jia Huang, Xiaoguang Yang, D. Shi, 2014 .

A simple unified critical plane damage parameter for high-temperature LCF life prediction of a Ni-based DS superalloy

Jia Huang, Xiaoguang Yang, D. Shi, 2014, Journal of Materials Science.

Effects of crystallographic orientations and dwell types on low cycle fatigue and life modeling of a SC superalloy

Jia Huang, Xiaoguang Yang, D. Shi, 2013 .

Numerical study on the competitive cracking behavior in TC and interface for thermal barrier coatings under thermal cycle fatigue loading

Shaolin Li, Xiaoguang Yang, D. Shi, 2019, Surface and Coatings Technology.

Cracking behaviors of EB-PVD thermal barrier coating under temperature gradient

Shaolin Li, Xiaoguang Yang, D. Shi, 2019, Ceramics International.

A multi-scale stochastic model for damage analysis and performance dispersion study of a 2.5D fiber-reinforced ceramic matrix composites

Xiaoguang Yang, D. Shi, X. Teng, 2020 .

A Study on Establishing a Microstructure-Related Hardness Model with Precipitate Segmentation Using Deep Learning Method

Shaolin Li, D. Shi, C. Wang, 2020, Materials.

Experiment and modelling on the effect of microstructural morphology on fatigue life of a Ni-based superalloy

Shaolin Li, Xiaoguang Yang, D. Shi, 2020 .

Experimental and numerical investigation of mixed-mode fatigue crack growth in nickel-based superalloy at high temperature

Shaolin Li, Xiaoguang Yang, D. Shi, 2022, Engineering Fracture Mechanics.

Thermal Fatigue of Thermal Barrier Coatings by Atmospheric Plasma Spraying

D. Shi, H. Qi, Xiao Guang Yang, 2008 .

Experimental investigation on creep‐fatigue behaviours of as‐received and service‐exposed turbine blades: Mechanism and life evaluation

Shaolin Li, Xiaoguang Yang, D. Shi, 2020 .

Multi-scale modelling of rafting behaviour under complex stress states for Ni3Al superalloys

D. Shi, Runnan Li, Y.S. Fan, 2022, International Journal of Plasticity.

Reconstruction of meso-structure and numerical simulations of the mechanical behavior of three-dimensional four-directional braided ceramic matrix composites

Xiaoguang Yang, D. Shi, X. Teng, 2020 .

A systematical weight function modified critical distance method to estimate the creep-fatigue life of geometrically different structures

Shaolin Li, Xiaoguang Yang, D. Shi, 2019, International Journal of Fatigue.

Viscoplastic constitutive model for Ni-based directionally solidified superalloy: Experimental validation on notched specimen

Xiaoguang Yang, D. Shi, Minwen Wang, 2020 .

Unified fatigue life modelling and uncertainty estimation of Ni-based superalloy family with a supervised machine learning approach

D. Shi, Y.S. Fan, X.G. Yang, 2022, Engineering Fracture Mechanics.

The setup and application of the multi-scale in-situ test system for fatigue damage analysis

Xiaoguang Yang, D. Shi, Yingli Shi, 2018 .

Experimental study and numerical modeling of the damage evolution of thermal barrier coating systems under tension

Shaolin Li, Xiaoguang Yang, D. Shi, 2018, Science China Technological Sciences.

Experimental study and numerical modeling of the damage evolution of thermal barrier coating systems under tension

Shaolin Li, Xiaoguang Yang, D. Shi, 2018, Science China Technological Sciences.

Quantitative mapping of service process-microstructural degradation-property deterioration for a Ni-based superalloy based on chord length distribution imaging process

Xiaoguang Yang, D. Shi, L. Tan, 2021 .

Effects of inclusions on dislocation behavior during deformation process of dissimilar steel-welded joints using acoustic emission and transmission electron microscopy

D. Shi, Hongyun Luo, Qianqian Tian, 2022, Journal of Materials Research.

A physics-informed machine learning approach for notch fatigue evaluation of alloys used in aerospace

D. Shi, L. Tan, Y.S. Fan, 2023, International Journal of Fatigue.

Constitutive modeling and failure mechanisms of anisotropic tensile and creep behaviors of nickel-base directionally solidified superalloy

Xiaoguang Yang, D. Shi, Chengli Dong, 2013 .

Study of micro-plastic deformation in pure iron before macro-yielding using acoustic emission, electron backscattered diffraction and transmission electron microscopy

D. Shi, Hongyun Luo, Xianfeng Fan, 2020 .

Low-cycle fatigue behavior of DZ125 superalloy under prior exposure conditions

Shaolin Li, Xiaoguang Yang, D. Shi, 2017 .

Effect of interface diffusion on low-cycle fatigue behaviors of MCrAlY coated single crystal superalloys

Shaolin Li, Xiaoguang Yang, D. Shi, 2020 .

Unified modeling of high temperature deformations of a Ni-based polycrystalline wrought superalloy under tension-compression, cyclic, creep and creep-fatigue loadings

Jia Huang, Xiaoguang Yang, D. Shi, 2015 .

Unified modeling of high temperature deformations of a Ni-based polycrystalline wrought superalloy under tension-compression, cyclic, creep and creep-fatigue loadings

Jia Huang, Xiaoguang Yang, D. Shi, 2014, Science China Technological Sciences.

In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading

Xiaoguang Yang, D. Shi, J. Marrow, 2021 .

Experimental and numerical study on creep behaviors of 2D twill woven quartz fiber/silica matrix composites

Xiaoguang Yang, D. Shi, Yiquan Guo, 2021, Ceramics International.

On the tensile behaviors of 2D twill woven SiO2f/SiO2 composites at ambient and elevated temperatures: Mesoscale analysis and in situ experimental investigation

Xiaoguang Yang, D. Shi, Changqi Liu, 2021 .

Tensile creep behavior of three-dimensional four-step braided SiC/SiC composite at elevated temperature

Xiaoguang Yang, D. Shi, H. Niu, 2017 .

Low cycle fatigue behavior of a 3D braided KD-I fiber reinforced ceramic matrix composite for coated and uncoated specimens at 1100 °C and 1300 °C

Xiaoguang Yang, D. Shi, Xin Jing, 2015 .

Experimental investigation on mechanical properties of a fiber-reinforced silica aerogel composite

Yantao Sun, Duoqi Shi, Xiaoguang Yang, 2011 .

In-situ study on compressive behaviors of different types of 3D SiC/SiC composites using X-ray computed tomography and digital image correlation

Xiaoguang Yang, D. Shi, Boping Zhang, 2023, Journal of Materials Research and Technology.

Experimental investigation and modeling of the creep behavior of ceramic fiber-reinforced SiO2 aerogel

Xiaoguang Yang, D. Shi, Yantao Sun, 2012 .

Effect of high temperature on compression property and deformation recovery of ceramic fiber reinforced silica aerogel composites

Shaolin Li, Xiaoguang Yang, D. Shi, 2017 .

Comparative investigation of creep behavior of ceramic fiber-reinforced alumina and silica aerogel

Xiaoguang Yang, D. Shi, Jian Feng, 2014 .

Experimental investigation on high temperature anisotropic compression properties of ceramic-fiber-reinforced SiO2 aerogel

Xiaoguang Yang, D. Shi, H. Qi, 2013 .

Investigation on non-uniform strains of a 2.5D woven ceramic matrix composite under in-plane tensile stress

Xiaoguang Yang, D. Shi, X. Teng, 2020 .

Small fatigue crack propagation rate and behaviours in a powder metallurgy superalloy: Role of stress ratio and local microstructure

Xiaoguang Yang, D. Shi, Qinzheng Yang, 2022, International Journal of Fatigue.

A quantitative role of rafting on low cycle fatigue behaviour of a directionally solidified Ni-based superalloy through a cross-correlated image processing method

Shaolin Li, D. Shi, S. W. Han, 2020 .

The role of coarsening on LCF behaviour using small coupons of a DS Ni-based superalloy

Xiaoguang Yang, D. Shi, Shiwei Han, 2019, International Journal of Fatigue.

Mechanical properties deterioration and its relationship with microstructural variation using small coupons sampled from serviced turbine blades

Shaolin Li, Xiaoguang Yang, D. Shi, 2019, Materials Science and Engineering: A.

Modeling of anisotropic tensile and cyclic viscoplastic behavior of a nickel-base directionally solidified superalloy

Xiaoguang Yang, D. Shi, Hui-chen Yu, 2014 .

A modern and robust methodology for modeling anisotropic creep characteristics of Ni-based DS and SC superalloys

Jia Huang, Xiaoguang Yang, D. Shi, 2014, Science China Technological Sciences.

An orientation-dependent creep life evaluation method for nickel-based single crystal superalloys

Xiaoguang Yang, D. Shi, Zhenlei Li, 2021 .

Effect of thermal barrier coatings on the fatigue behavior of a single crystal nickel-based superalloy: Mechanism and lifetime modeling

Shaolin Li, Xiaoguang Yang, D. Shi, 2022, Surface & Coatings Technology.

Influence of MCrAlY coating on low-cycle fatigue behavior of a directionally solidified nickel-based superalloy in hot corrosive environment

Guoqiang Xu, Hongyu Qi, Duoqi Shi, 2016 .

Life modeling of anisotropic fatigue behavior for a single crystal nickel-base superalloy

Ying Li, Xiaoguang Yang, D. Shi, 2014 .

The framework of hot corrosion fatigue life estimation of a PM superalloy using notch fatigue methodology combined with pit evolution

Shaolin Li, Xiaoguang Yang, D. Shi, 2021 .

Low-temperature hot corrosion effects on the low-cycle fatigue lifetime and cracking behaviors of a powder metallurgy Ni-based superalloy

Shaolin Li, Xiaoguang Yang, D. Shi, 2018, International Journal of Fatigue.

The effect of inclusion factors on fatigue life and fracture-mechanics-based life method for a P/M superalloy at elevated temperature

Shaolin Li, Xiaoguang Yang, D. Shi, 2020 .

Effect of Maximum Temperature on the Thermal Fatigue Behavior of Superalloy GH536

D. Shi, J. Chen, G. Miao, 2016 .

Fatigue life evaluation for notched single-crystal Ni-based superalloys considering inhomogeneous rafting microstructure

D. Shi, L. Tan, Y.S. Fan, 2022, International Journal of Fatigue.

Study on the deformation mechanism of the inflection point in tensile curve of nano/ultrafine-grained austenite stainless steel rolled at different temperature

D. Shi, Hongyun Luo, Yue Ma, 2020, Materials Science and Engineering: A.

An energy-based low-cycle fatigue life evaluation method considering anisotropy of single crystal superalloys

Xiaoguang Yang, D. Shi, Zhenlei Li, 2022, Propulsion and Power Research.

Creep‐fatigue behavior of thin‐walled plate with holes: Stress state characterization and life estimation

Jia Huang, Xiaoguang Yang, D. Shi, 2022, Fatigue & Fracture of Engineering Materials & Structures.

Experimental investigation and simulation on stress rupture behavior of a Ni-based DS superalloy affected by initial elastic-plastic multi-axial stress state

Jia Huang, Xiaoguang Yang, D. Shi, 2019, Materials Science and Engineering: A.

Failure assessment of the first stage high-pressure turbine blades in an aero-engine turbine

Chan Wang, D. Shi, Xiaoguang Yang, 2017 .

Low cycle fatigue behaviour of a single crystal Ni-based superalloy with a central hole: Effect of inhomogeneous rafting microstructure

Xiaoguang Yang, D. Shi, T. Sui, 2021 .

Experimental investigation and modelling of microstructure degradation in a DS Ni-based superalloy using a quantitative cross-correlation analysis method

Shaolin Li, Xiaoguang Yang, D. Shi, 2018, Journal of Alloys and Compounds.

Effect of multi-axial stress state on creep behavior and stress rupture life of a Ni-based DS superalloy

Jia Huang, Xiaoguang Yang, D. Shi, 2014 .

A reduced-order method for parameter identification of a crystal plasticity model considering crystal symmetry

Jia Huang, Xiaoguang Yang, D. Shi, 2019, Science China Technological Sciences.

A reduced-order method for parameter identification of a crystal plasticity model considering crystal symmetry

Jia Huang, Xiaoguang Yang, D. Shi, 2019, Science China Technological Sciences.

A physically-based representative stress methodology for predicting stress rupture life of Ni-based DS superalloy

Jia Huang, Xiaoguang Yang, D. Shi, 2022, Chinese Journal of Aeronautics.

Experimental investigation and numerical modeling for elasto-plastic notch-root stress/strain analysis under monotonic loadings

Jia Huang, Xiaoguang Yang, D. Shi, 2014, Science China Technological Sciences.

Experimental investigation and numerical modeling for elasto-plastic notch-root stress/strain analysis under monotonic loadings

Jia Huang, Xiaoguang Yang, D. Shi, 2014 .

Low-cycle fatigue of MCrAlY-coated superalloys: a fracture mechanics-based analysis

Shaolin Li, Xiaoguang Yang, D. Shi, 2021 .

Assessment of microstructure and property of a service exposed turbine blade made of K417 superalloy

Xiaoguang Yang, D. Shi, C. Wang, 2017 .

Combined tensile and bending fatigue behavior and failure mechanism of a blade-like specimen at elevated temperature

Guandong Xu, Jia Huang, Xiaoguang Yang, 2022, International Journal of Fatigue.

Thermomechanical fatigue experimental study on a notched directionally solidified Ni-base superalloy

Duoqi Shi, Xiaoguang Yang, Xiaoguang Yang, 2016 .

Experimental investigation and life prediction of hot corrosion pre-exposure on low-cycle fatigue of a directionally solidified nickel-base superalloy

Shaolin Li, Xiaoguang Yang, D. Shi, 2015 .

Constitutive modelling and creep life prediction of a directionally solidified turbine blade under service loadings

D. Shi, H. Niu, C. Quan, 2015 .

Experimental investigation on low cycle fatigue and creep-fatigue interaction of DZ125 in different dwell time at elevated temperatures

Hongyu Qi, Duoqi Shi, Xiaoguang Yang, 2010 .

Experimental investigation on both low cycle fatigue and fracture behavior of DZ125 base metal and the brazed joint at elevated temperature

Xiaoguang Yang, D. Shi, Chengli Dong, 2011 .

Damage evolution and life modeling of hot corrosion environment on creep‐fatigue of a directionally solidified nickel‐based superalloy

Shaolin Li, Xiaoguang Yang, D. Shi, 2023, Fatigue & Fracture of Engineering Materials & Structures.

Effects of tensile load hold time on the fatigue and corrosion-fatigue behavior of turbine blade materials

Shaolin Li, Xiaoguang Yang, D. Shi, 2021 .

Finite element analysis and life modeling of a notched superalloy under thermal mechanical fatigue loading

Xiaoguang Yang, D. Shi, Gaole Zhao, 2018, International Journal of Pressure Vessels and Piping.

Design of Iosipescu Shear Test for Applying to a Bi-Modulus Ceramic-Fiber-Reinforced SiO 2 Aerogel

Xiaoguang Yang, D. Shi, Yantao Sun, 2014 .

Phase-field fracture modeling for creep crack

Shaolin Li, Xiaoguang Yang, D. Shi, 2023, Theoretical and Applied Fracture Mechanics.

A hypothetical dislocation well model for kinematic hardening in cyclic plasticity

Jia Huang, Xiaoguang Yang, D. Shi, 2018, International Journal of Plasticity.

Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy

D. Shi, X. G. Yang, A. Haq, 2018, Strength of Materials.

Constitutive modeling of a directionally solidified nickel-based superalloy DZ125 subjected to thermal mechanical creep fatigue loadings

Xiaoguang Yang, D. Shi, Huiqi Yu, 2019, Rare Metals.

COMPUTATIONAL STUDY ON MICROSTRUCTURE-SENSITIVE HIGH CYCLE FATIGUE DISPERSIVITY

Xiaoguang Yang, D. Shi, Shiwei Han, 2016 .

Constitutive Modeling of Hardening and Creep Response of a Nickel-Based Superalloy Udimet 720Li

Xiaoguang Yang, D. Shi, Yan-rong Wang, 2003 .

Continuum damage mechanism-based life prediction for Ni-based superalloy under complex loadings

Xiaoguang Yang, D. Shi, Jinlong Liu, 2013 .

A novel creep-fatigue life evaluation method for ceramic-composites components

Xiaoguang Yang, D. Shi, Changqi Liu, 2023, International Journal of Mechanical Sciences.

A numerical approach to simulate 3D crack propagation in turbine blades

Shaolin Li, He Liu, Xiaoguang Yang, 2020 .

Deformation and rupture behaviors of SiC/SiC under creep, fatigue and dwell-fatigue load at 1300 °C

Xiaoguang Yang, D. Shi, H. Niu, 2019 .

Fatigue response, fracture characteristic and life modeling of a near-alpha titanium alloy under typical cyclic loadings in service

Jia Huang, Xiaoguang Yang, D. Shi, 2016, Rare Metals.

Residual fatigue life prediction based on a novel damage accumulation model considering loading history

Xiaoguang Yang, Zhenlei Li, Shaolin Li, 2020 .

Creep and fatigue lifetime analysis of directionally solidified superalloy and its brazed joints based on continuum damage mechanics at elevated temperature

Yantao Sun, Chengli Dong, Duoqi Shi, 2013 .

Experimental investigations on creep rupture strength and failure mechanism of vacuum brazed joints of a DS superalloy at elevated temperature

Ying Liu, Lei Zhang, Chengli Dong, 2012 .

Nonlinear thermo-acoustic response and fatigue prediction of three-dimensional braided composite panels in supersonic flow

Xiaoguang Yang, D. Shi, Changqi Liu, 2023, Composite Structures.

The δ Phase Precipitation of an Inconel 718 Superalloy Fabricated by Electromagnetic Stirring Assisted Laser Solid Forming

Xiaoguang Yang, D. Shi, Chunping Huang, 2019, Materials.

A phase-field model for mixed-mode elastoplastic fatigue crack

Xiaoguang Yang, Shaolin Li, D. Shi, 2023, Engineering Fracture Mechanics.

Experimental, analytical and numerical investigation on tensile behavior of twisted fiber yarns

Xiaoguang Yang, D. Shi, X. Teng, 2020 .

A diffusion-coupled cohesive element model for cracking analysis of thermal barrier coatings

Shaolin Li, Xiaoguang Yang, D. Shi, 2021, Engineering Fracture Mechanics.

Environmental impacts of large-scale CSP plants in northwestern China.

Zhiyong Wu, Zhifeng Wang, Anping Hou, 2014, Environmental science. Processes & impacts.

Experimental Investigation on the Creep and Low Cycle Fatigue Behaviors of a Serviced Turbine Blade

Xiaoguang Yang, D. Shi, Zhenlei Li, 2019, Volume 7A: Structures and Dynamics.

Accelerated LCF‐creep experimental methodology for durability life evaluation of turbine blade

Xiaoguang Yang, D. Shi, Zhenlei Li, 2018 .

Mechanical modeling of a stitched sandwich thermal protection structure with ceramic-fiber-reinforced SiO2 aerogel as core layer

Xiaoguang Yang, D. Shi, Yantao Sun, 2021, Journal of Sandwich Structures & Materials.

Experimental investigation on mechanical property of an integrated thermal protection structure

D. Shi, F. Cao, Jian Feng, 2015 .

Progressive Failure Analysis of an Integral Composite Joint for Thrust Reverser Cascade

D. Shi, H. Qi, Ji Yang, 2019, Key Engineering Materials.

Stress analysis and lifetime prediction for Ti–6Al–4V welding joint under fatigue loading

Shaolin Li, Xiaoguang Yang, D. Shi, 2021, Materials Science and Technology.

Effect of non-uniform growth of TGO layer on cracking behaviors in thermal barrier coatings: A numerical study

Shaolin Li, Xiaoguang Yang, D. Shi, 2019, Surface and Coatings Technology.

Failure analysis and engineering mechanics modeling methods of a stitched ceramic sandwich structure

Xiaoguang Yang, D. Shi, Yantao Sun, 2023, Engineering Failure Analysis.

A fatigue life estimation approach considering the effect of geometry and stress sensitivity

Guoqiang Xu, Zhenlei Li, Yushu He, 2021 .

LCF behavior and life modeling of DZ125 under complicated load condition at high temperature

Xiaoguang Yang, D. Shi, Jia Huang, 2013 .

Tension and compression moduli characterization of a bimodular ceramic-fiber reinforced SiO2 aerogel composite

Xiaoguang Yang, D. Shi, Yantao Sun, 2020, Materials Testing.

Physics-informed machine learning with high-throughput design module for evaluating rupture life and guiding design of oxide/oxide ceramic matrix composites

Bo Zhang, Xiaoguang Yang, D. Shi, 2023, Ceramics International.

Effect of high temperature on compression property and deformation recovery of ceramic fiber reinforced silica aerogel composites

Shaolin Li, Xiaoguang Yang, D. Shi, 2017, Science China Technological Sciences.

The dominant role of defects on fatigue behaviour of a SLM Ni-based superalloy at elevated temperature

D. Shi, B. Li, S. Guo, 2023, International Journal of Fatigue.

Durability Airworthiness Verification Connotation Analysis and Compliance Method Investigation for Turbine Blade

Xiao Guang Yang, Guang Feng Hu, Zhen Lei Li, 2019, Key Engineering Materials.

Bond-associated non-ordinary state-based peridynamics for simulating damage evolution of thermal barrier coatings in aero-engine turbine blades

Shaolin Li, D. Shi, H. Qi, 2024, Engineering Fracture Mechanics.

Mechanical analysis of a stitched sandwich structure and its SiO2f/SiO2 panels: Experimental and numerical investigation on compression and shear performances

D. Shi, Changqi Liu, Z. Cheng, 2024, Composite Structures.

A novel microstructure-informed machine learning framework for mechanical property evaluation of SiCf/Ti composites

D. Shi, Changqi Liu, Yong-sheng Fan, 2023, Journal of Materials Research and Technology.