H. Ishikawa

发表

J INTEGRAL OF A MIXED MODE CRACK AND ITS APPLICATION

H. Ishikawa, H. Ishikawa, 1980 .

Prediction of failure modes in unidirectional short-fibre composites

M. Taya, T. Chou, H. Ishikawa, 1982 .

A finite element analysis of stress intensity factors for combined tensile and shear loading by only a virtual crack extension

H. Ishikawa, H. Ishikawa, 1980 .

906 Application of Set-Based Design Method to Control Engineering Problem: (PID Control of Inverted Pendulum)

Shuichi Kato, Haruo Ishikawa, Takahiro Kawashima, 2015 .

Set-based Design Method for Multi-objective Structural Design with Conflicting Performances Under Topological Change☆

H. Ishikawa, Naoko Sasaki, 2015 .

SURFACE MODIFICATION OF STAINLESS STEEL SHEETS BY MeV ION IMPLANTATION

H. Ishikawa, H. Ogiso, K. Ozaki, 2006 .

Curvature-based residual stress measurement for ion-implanted stainless-steel sheet

J. Akedo, H. Ishikawa, H. Ogiso, 2004 .

On the stress functions for the stress field around an interface crack between dissimilar materials

H. Ishikawa, Y. Kohno, 1993 .

Analysis of an internal central crack with bridging fibers in a finite orthotropic plate

H. Ishikawa, M. Ji, 1997 .

EVALUATION OF THE HYBRID EFFECT OF HYBRID COMPOSITE FROM THE VIEWPOINT OF STRENGTH OF BRIDGING FIBERS IN A CRACK

H. Ishikawa, M. Ji, 1998 .

New rating methods to prioritize customer requirements in QFD with incomplete customer preferences

H. Ishikawa, M. Inoue, Y. Nahm, 2012, The International Journal of Advanced Manufacturing Technology.

Indentation method to measure the residual stress induced by ion implantation

H. Ishikawa, Shizuka Nakano, Kimihiro Ozaki, 2006 .

Decision-making support for sustainable product creation

Masato Inoue, Rainer Stark, Kai Lindow, 2012, Adv. Eng. Informatics.

A method for linear elasto-static analysis of multi-layered axisymmetrical bodies using Hankel's transform

H. Ishikawa, W. Wang, 2001 .

Analysis of stress singularities at the corner point of square hole and rigid square inclusion in elastic plates by conformal mapping

H. Ishikawa, Y. Kohno, 1993 .

A boundary element analysis of the linear elasto-static axisymmetric contact problem of an infinite layered medium with a homogeneous body

H. Ishikawa, Wenqing Wang, 2003 .

An inverse method for determining material properties of a multi-layer medium by boundary element method

H. Ishikawa, Wenqing Wang, Hironobu Yuki, 2001 .

Singularities and stress intensities at the corner point of a polygonal hole and rigid polygonal inclusion under antiplane shear

H. Ishikawa, Y. Kohno, 1995 .

Analysis of the orders of stress singularity at the corner point of a diamond-shape rigid inclusion or hole in an infinite plate under antiplane bending by conformal mapping

H. Ishikawa, H. Pengfei, Y. Kohno, 1995 .

Singular stress and displacement fields around the corner point of a fiber end in short fiber reinforced composites

H. Ishikawa, Y. Kohno, 1991 .

Stress Singularities at the Fiber End in Short Fiber Reinforced Composites

H. Ishikawa, T. Fujiwara, 1987 .

An Upgrade Design Method for Environmental Issues Based on the Concept of Set-Based Design

Masato Inoue, Haruo Ishikawa, Yoon-Eui Nahm, 2012 .

New rating methods to prioritize customer requirements in QFD with incomplete customer preferences

Yoon-Eui Nahm, Haruo Ishikawa, Masato Inoue, 2013 .

Compression fatigue behavior of notched graphite/epoxy laminates

H. Ishikawa, 1985, International Journal of Fracture.

A balanced design for plural performances of technology, economy and environment in product design

Haruo Ishikawa, Naoko Sasaki, H. Ishikawa, 2020 .

Representing and Aggregating Engineering Quantities with Preference Structure for Set-based Concurrent Engineering

Haruo Ishikawa, Yoon-Eui Nahm, H. Ishikawa, 2005, Concurr. Eng. Res. Appl..

Simultaneous Satisfactory Design of Structural and Control Systems by Set Based Design Method

Aiguo Ming, Haruo Ishikawa, Naoko Sasaki, 2017 .

Simultaneous Design of Structural and Control Systems using Set-based Design Method

Haruo Ishikawa, Naoko Sasaki, H. Ishikawa, 2018, ICINCO.

Multi-objective simultaneous satisficing design based on set-based concept with preference (Simultaneous design of structural and control system for a product)

Haruo Ishikawa, Naoko Sasaki, H. Ishikawa, 2018 .

Integrated Product and Process Modeling for Collaborative Design Environment

Haruo Ishikawa, Yoon-Eui Nahm, H. Ishikawa, 2004, Concurr. Eng. Res. Appl..

An Internet-based integrated product design environment. Part I: a hybrid agent and network architecture

Haruo Ishikawa, Y.-E. Nahm, H. Ishikawa, 2005 .

The Estimation of Fracture Resistance of Orthogonal Three-Dimensional Fiber-Reinforced Composite by DCB Testing.

H. Ishikawa, M. Ji, M. Anahara, 1996 .

Multi-Objective Simultaneous Satisficing Design Based on Set-Based Concept with Preference: (Application Example: Simultaneous Design of Structural and Control Systems)

Aiguo Ming, Haruo Ishikawa, Naoko Sasaki, 2017 .

Effects of substrate temperature during implantation on the mechanical properties of ion-implanted silicon

J. Akedo, H. Ishikawa, H. Ogiso, 2004 .

Martensitic transformation and the stress induced by 3 MeV ion implantation in an austenite stainless steel sheet

J. Akedo, H. Ishikawa, H. Ogiso, 2003 .