I. Serrano-Muñoz

发表

Investigation of residual stresses and microstructure effects on the fatigue behaviour of a L-PBF AlSi10Mg alloy

M. Madia, Ilaria Roveda, I. Serrano-Muñoz, 2022, Procedia Structural Integrity.

Location, location & size: defects close to surfaces dominate fatigue crack initiation

J. Buffière, R. Mokso, I. Serrano-Muñoz, 2017, Scientific Reports.

The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure

I. Serrano-Muñoz, A. Kromm, G. Nolze, 2020, Scientific Reports.

Mechanical characterization by multiscale instrumented indentation of highly heterogeneous materials for braking applications

D. Mercier, I. Serrano-Muñoz, D. Chicot, 2018, Journal of Materials Science.

On the interplay of microstructure and residual stress in LPBF IN718

I. Serrano-Muñoz, A. Kromm, A. Ulbricht, 2020, Journal of Materials Science.

Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 718

I. Serrano-Muñoz, E. Polatidis, J. Čapek, 2022, Journal of Materials Science.

Evolution in microstructure and compression behaviour of a metallic sintered friction material after braking

I. Serrano-Muñoz, P. Dufrénoy, V. Magnier, 2019, Wear.

Influence of the Composition on the Compressive Behaviour of a Semi-Metallic Brake-Pad Material

I. Serrano-Muñoz, P. Dufrénoy, V. Magnier, 2022, Materials.

Influence of casting defects on the fatigue behavior of cast aluminum AS7G06-T6

I. Serrano-Muñoz, C. Verdu, Y. Nadot, 2014 .

Casting defects in structural components: Are they all dangerous? A 3D study

J. Buffière, I. Serrano-Muñoz, C. Verdu, 2018, International Journal of Fatigue.

On the influence of heat treatment on microstructure and mechanical behavior of laser powder bed fused Inconel 718

I. Serrano-Muñoz, M. Sprengel, A. Evans, 2020 .

Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals

I. Serrano-Muñoz, A. Kromm, A. Ulbricht, 2021, Metals.

Scanning Manufacturing Parameters Determining the Residual Stress State in LPBF IN718 Small Parts

I. Serrano-Muñoz, A. Kromm, A. Ulbricht, 2021, Advanced Engineering Materials.

Dislocation structures after creep in an Al-3.85%Mg alloy studied using EBSD-KAM technique

I. Serrano-Muñoz, R. Saliwan-Neumann, G. González-Doncel, 2023, Materials Letters.

About the Role of Interfaces on the Fatigue Crack Propagation in Laminated Metallic Composites

I. Serrano-Muñoz, H. Höppel, M. Göken, 2021, Materials.

Dislocation substructures in pure aluminium after creep deformation as studied by electron backscatter diffraction

I. Serrano-Muñoz, R. Saliwan-Neumann, G. González-Doncel, 2022, Journal of applied crystallography.

The Importance of Subsurface Residual Stress in Laser Powder Bed Fusion IN718

I. Serrano-Muñoz, A. Kromm, M. Sprengel, 2021 .

Critical role of scan strategies on the development of microstructure, texture, and residual stresses during laser powder bed fusion additive manufacturing

I. Serrano-Muñoz, A. Kromm, T. Mishurova, 2021 .

3D Shape Analysis of Powder for Laser Beam Melting by Synchrotron X-ray CT

I. Serrano-Muñoz, T. Mishurova, G. Bruno, 2019, Quantum Beam Science.

Separation of the impact of residual stress and microstructure on the fatigue performance of LPBF Ti-6Al-4V at elevated temperature

G. Requena, B. Rehmer, I. Serrano-Muñoz, 2021, International Journal of Fatigue.

Influence of surface and internal casting defects on the fatigue behaviour of A357-T6 cast aluminium alloy

J. Buffière, I. Serrano-Muñoz, C. Verdu, 2016 .

3D Computed Tomography Quantifies the Dependence of Bulk Porosity, Surface Roughness, and Re‐Entrant Features on Build Angle in Additively Manufactured IN625 Lattice Struts

I. Serrano-Muñoz, Fabien Leonard, C. Haberland, 2021, Advanced Engineering Materials.

Non-linear mechanical behavior of a sintered material for braking application using digital image correlation

I. Serrano-Muñoz, P. Dufrénoy, V. Magnier, 2017 .

Multiaxial fatigue design of cast parts: Influence of complex defect on cast AS7G06-T6

I. Serrano-Muñoz, Y. Nadot, P. Mu, 2014 .

Influence of complex defect on cast AS7G06-T6 under multiaxial fatigue loading

I. Serrano-Muñoz, Y. Nadot, P. Mu, 2014 .

3 D Shape Analysis of Powder for Laser Beam Melting by Synchrotron X-ray CT

I. Serrano-Muñoz, T. Mishurova, G. Bruno, 2019 .

Separation of the Formation Mechanisms of Residual Stresses in LPBF 316L

I. Serrano-Muñoz, G. Mohr, K. Sommer, 2020 .

Influence of Pore Size and Crystallography on the Small Crack HCF Behavior of an A357-T6 Cast Aluminum Alloy

J. Buffière, S. Dancette, I. Serrano-Muñoz, 2020, Metallurgical and Materials Transactions A.

Triaxial Residual Stress in Laser Powder Bed Fused 316L: Effects of Interlayer Time and Scanning Velocity

I. Serrano-Muñoz, A. Kromm, G. Mohr, 2021, Advanced Engineering Materials.

Torsional fatigue mechanisms of an A357-T6 cast aluminium alloy

J. Buffière, S. Dancette, I. Serrano-Muñoz, 2020 .

Focussed on characterization of crack tip fields 3 D Analyses of crack propagation in torsion

S. Dancette, J. Lachambre, I. Serrano-Muñoz, 2015 .

Influence of post-process heat treatments on the fatigue crack propagation behaviour of a PBF-LB/M AlSi10Mg alloy

G. Requena, M. Madia, Ilaria Roveda, 2023, International Journal of Fatigue.

High-resolution Bragg-edge neutron radiography detects grain morphology in PBF-LB/M IN718

N. Kardjilov, I. Serrano-Muñoz, A. Kromm, 2023, Materialia.

Influence of a 265 °C heat treatment on the residual stress state of a PBF-LB/M AlSi10Mg alloy

G. Requena, M. Madia, Ilaria Roveda, 2022, Journal of Materials Science.

Synchrotron X-ray refraction detects microstructure and porosity evolution during in-situ heat treatments

A. Kupsch, Ilaria Roveda, I. Serrano-Muñoz, 2022, Materials Science and Engineering: A.