Y. Liu

发表

Commercial Scale Uniform Powder Coating for Metal Additive Manufacturing

S. F. Li, K. Geng, R. Misra, 2020, JOM.

Preparation of Ca3Co4O9 and Improvement of its Thermoelectric Properties by Spark Plasma Sintering

Yuanhua Lin, C. Nan, Y. Liu, 2005 .

Water-jet guided laser drilling of SiC reinforced aluminium metal matrix composites

S. Marimuthu, Y. Liu, B. Smith, 2019, Journal of Composite Materials.

Laser cutting of aluminium-alumina metal matrix composite

S. Marimuthu, Y. Liu, Bethan Smith, 2019, Optics & Laser Technology.

Effect of sintering temperature and TiB2 content on the grain size of B4C-TiB2 composites

Zhenqin Li, Y. Liu, Yusi Peng, 2020, Materials Today Communications.

Influence of environmental parameters on the frictional behavior of DLC coatings

Y. Liu, A. Erdemir, E. Meletis, 1997 .

Microstructure and tribological properties of titanium matrix nanocomposites through powder metallurgy using graphene oxide nanosheets enhanced copper powders and spark plasma sintering

Y. Liu, H.L. Wang, Y.Q. Fu, 2021 .

Microstructure and properties of a titanium carbide reinforced coating on grey iron applied with laser cladding

Y. Li, J. Ding, Y. Liu, 2019, materiali in tehnologije.

A compact reciprocating vacuum microtribometer

Y. Liu, J. Schaefer, S. Ahmed, 2012 .

Friction and Wear Properties of WC/C Nano-Scale Multilayer Coatings on Technical Surfaces

Y. Liu, J. Schaefer, M. Gubisch, 2011 .

Tribological performance of selected bearings and bearing materials used for nanopositioning

M. Scherge, Y. Liu, J. Schaefer, 2005 .

Nanoscale multilayer WC/C coatings developed for nanopositioning: Part I. Microstructures and mechanical properties

Y. Liu, J. Schaefer, S. Krischok, 2005 .

Antibacterial and osteogenic properties of silver-containing hydroxyapatite coatings produced using a sol gel process.

J. Ong, Y. Liu, H. Courtney, 2007, Journal of biomedical materials research. Part A.

Effect of Ultrasonic on Coating Performances of Electroplated Diamond Tools

Y. Wang, Y. Liu, A. Yu, 2011 .

Friction and adhesion in boundary lubrication measured by microtribometers

Shuhai Liu, W. Hild, Juergen A. Schaefer, 2006 .

Reactive sintering mechanism of Ti + Mo2C and Ti + VC powder compacts

Y. Liu, Hui-ping Tang, B. Liu, 2011 .

Hydrogen embrittlement and fracture toughness of a titanium alloy with surface modification by hard coatings

Y. Liu, S. C. Lee, E. Meletis, 1996 .

Fabrication of in situ TiB2 reinforced steel matrix composite by vacuum induction melting and its microstructure and tensile properties

Y. Liu, B. Li, J. Li, 2010 .

A study of the wear mechanism of diamond-like carbon films

Ali Erdemir, Efstathios I. Meletis, Y. Liu, 1996 .

Synthesis of nano Ti(C,N) powder by mechanical activation assisted carbothermal reduction nitridation

Y. Y. Li, Y. Liu, D. Xiang, 2009 .

Improving the microstructure and mechanical properties of magnesium-alloy sheets with a new extrusion method

Y. Liu, Z. Yin, C. Liu, 2017 .

Activating Trace Fe Impurity as Catalyst to Plant Carbon Nanotubes Within Ti-6Al-4V Powders for High-Performance Ti Metal Matrix Composites

S. F. Li, Y. Liu, Y. F. Yang, 2019, Metallurgical and Materials Transactions A.

The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds.

P. Conway, C. Torres-Sánchez, Y. Liu, 2017, Materials science & engineering. C, Materials for biological applications.

Low temperature synthesis of nano Ti(C,N) by novel mechanical and thermal activation method

Y. Liu, D. Xiang, M. Tu, 2015 .

Sintering effect on microstructural evolution and mechanical properties of spark plasma sintered Ti matrix composites reinforced by reduced graphene oxides

Y. Fu, Y. Liu, Yusheng Zhang, 2018, Ceramics International.

Interface engineering of graphene/copper matrix composites decorated with tungsten carbide for enhanced physico-mechanical properties

Wei Zhang, Y. Fu, Y. Liu, 2021, Carbon.

Tribological characteristics of WC1-x, W2C and WC tungsten carbide films

Gernot Ecke, Lothar Spiess, Stefan Krischok, 2005 .

Structure and wear behaviour of nanostructured and ultrafine HVOF spraying WC–17Co coatings

Y. Liu, G. Gou, M. Tu, 2009 .

Millisecond pulse laser machining of thermal barrier coatings

S. Marimuthu, Y. Liu, Bethan Smith, 2020 .

An investigation of the relationship between graphitization and frictional behavior of DLC coatings

Y. Liu, A. Erdemir, E. Meletis, 1996 .

Evaluation of the friction of WC/DLC solid lubricating films in vacuum

Lothar Spiess, Juergen A. Schaefer, Y. Liu, 2006 .

The sliding friction of thermoplastic polymer composites tested at low speeds

Juergen A. Schaefer, Y. Liu, J. Schaefer, 2006 .

Nanoscale multilayer WC/C coatings developed for nanopositioning, part II: Friction and wear

M. Scherge, Y. Liu, J. Schaefer, 2005 .

3D reconstruction of bias effects on porosity, alignment and mesoscale structure in electrospun tubular polycaprolactone

J. Lannutti, Y. Liu, J. Gaumer, 2021, Polymer.

Effect of Microstructure on the Electrical Properties of Nano-Structured TiN Coatings Deposited by Vacuum Cold Spray

Y. Liu, J. Feng, K. Kusumoto, 2010 .

Physical characterization of electrospun polycaprolactone via laser micrometry: Porosity and condition-dependent jet instabilities

J. Lannutti, Y. Liu, C. McElroy, 2020 .

Tribological behavior of DLC coatings with functionally gradient interfaces

Efstathios I. Meletis, Y. Liu, Y. Liu, 2002 .

Characteristics of hole formation during laser drilling of SiC reinforced aluminium metal matrix composites

S. Marimuthu, Y. Liu, B. Smith, 2019, Journal of Materials Processing Technology.

Sliding friction of nanocomposite WC1-x/C coatings: transfer film and its influence on tribology.

Y. Liu, J. Schaefer, M. Gubisch, 2009, Journal of nanoscience and nanotechnology.

Optimizing vacuum ultraviolet attenuated phase shift masking materials

Y. Liu, Anatoly Bourov, B. Smith, 2002 .

Control of the LiFePO4 electrochemical properties using low-cost iron precursor in a melt process

M. Gauthier, Y. Liu, S. Rousselot, 2016, Journal of Solid State Electrochemistry.