J. Ramos-Grez

J. Ramos-Grez, G. O. Barrionuevo, J. L. Mullo, 2022, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

Reducing surface roughness of metallic freeform-fabricated parts using non-tactile finishing methods

Jorge Ramos-Grez, D. Bourell, J. Ramos-Grez, 2004 .

Sensitivity analysis of geometric errors in additive manufacturing medical models.

Pablo Irarrazaval, Cristobal Arrieta, Cristian Tejos, 2015, Medical engineering & physics.

Structural parameters determining the strength of the porcine vertebral body affected by tumours

M. Campos, A. Fields, J. Ramos-Grez, 2015, Computer methods in biomechanics and biomedical engineering.

Kerf profile analysis and neural network-based modeling of increasing thickness PMMA sheets cut by CO2 laser

J. Ramos-Grez, Iván La Fé-Perdomo, Cristóbal Löhr, 2021 .

Predicting the evolution of static yield stress with time of blended cement paste through a machine learning approach

J. Ramos-Grez, Ivan Navarrete, Mauricio Lopez, 2023, Construction and Building Materials.

An insight into adiabatic efficiency hybrid modeling in Laser-Based Powder Bed Fusion of 316L stainless steel

J. Ramos-Grez, I. La Fé-Perdomo, 2023, Optics & Laser Technology.

Internal rotation of fluorinated butane compounds: The maximum hardness principle and carbon–carbon rotational barriers

J. Ramos-Grez, J. Lahsen, 2006 .

Microhardness and wear resistance in materials manufactured by laser powder bed fusion: Machine learning approach for property prediction

M. Walczak, J. Ramos-Grez, G. O. Barrionuevo, 2023, CIRP Journal of Manufacturing Science and Technology.

Effects of laser surface modification on stainless steel 316L thin annular discs under radial and cartesian scans

J. Ramos-Grez, C. Guerra, Ignacio Jeria, 2022, Optics & Laser Technology.

Experimental-numerical methodology for the manufacturing of cranial prosthesis via laser forming

D. Celentano, J. Ramos-Grez, F. Cook, 2016 .

Effect of inclination angle on the absorptance of a graphite-coated cold-rolled steel sheet irradiated by laser

D. Celentano, J. Ramos-Grez, F. Cook, 2016 .

Characterization of the absorptance of laser irradiated steel sheets

D. Celentano, J. Ramos-Grez, F. Cook, 2015 .

Spiral growth selective laser melting of axisymmetric objects from Cu-Ni–Sn alloy powder: a mass rate efficiency and physical properties study

M. Walczak, J. Ramos-Grez, Javier Vera-Hoffmann, 2023, The International Journal of Advanced Manufacturing Technology.

Effect of laser scanning angle and atmospheric oxygen on mechanical properties and microstructural morphology of selective laser-sintered aluminum-filled polyamide monolayers

J. Ramos-Grez, F. Alamos, L. Valenzuela, 2021, The International Journal of Advanced Manufacturing Technology.

Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser melting

M. Walczak, J. Ramos-Grez, C. Betancourt, 2021, The International Journal of Advanced Manufacturing Technology.

Comparative analysis and experimental validation of statistical and machine learning-based regressors for modeling the surface roughness and mechanical properties of 316L stainless steel specimens produced by selective laser melting

J. Ramos-Grez, C. Guerra, Ignacio Jeria, 2022, Journal of Manufacturing Processes.

Characterization of the mechanical properties of samples fabricated by an experimental SGM device

J. Ramos-Grez, Guillermo Zañartu‐Apara, 2010 .

Multiphysics simulation of laser–material interaction during laser powder depositon

M. Walczak, J. Ramos-Grez, F. Vásquez, 2011, The International Journal of Advanced Manufacturing Technology.

Bending of stainless steel thin sheets by a raster scanned low power CO2 laser

J. Ramos-Grez, Carlos Vásquez-Ojeda, 2009 .

Flow and Mold Filling Modeling and Simulation to Enhance Resin Transfer Molding Processes

J. Ramos-Grez, J. Montecinos, C. J. Mosella, 2008 .

Ni-Al Bronze in Molten Carbonate Manufactured by LPBF: Effect of Porosity Design on Mechanical Properties and Oxidation

J. Ramos-Grez, C. Guerra, M. Sancy, 2023, Materials.

A machine learning approach for the prediction of melting efficiency in wire arc additive manufacturing

J. Ramos-Grez, S. Williams, G. O. Barrionuevo, 2022, The International Journal of Advanced Manufacturing Technology.

Applicability of LPBF for producing Cu-11Al-5Ni-4Fe wt.% with shape memory properties

M. Walczak, J. Ramos-Grez, C. Guerra, 2023, Smart Materials and Structures.

Effect of total applied energy density on the densification of copper–titanium slabs produced by a DMLF process

J. Ramos-Grez, Jorge Sanz-Guerrero, 2008 .

The efficiency of copper ore comminution: A thermodynamic exergy analysis

Timothy G. Gutowski, Daniel R. Cooper, Daniel R. Cooper, 2017 .

Quantitative assessments of geometric errors for rapid prototyping in medical applications

Pablo Irarrazaval, Cristobal Arrieta, Cristian Tejos, 2012 .

A method for manufacturing cellular metals with open- and close-type porosities

M. Walczak, J. Ramos-Grez, M. Covaciu, 2011 .

Experimental-numerical methodology for the manufacturing of cranial prosthesis via laser forming

D. Celentano, J. Ramos-Grez, F. Cook, 2016, The International Journal of Advanced Manufacturing Technology.

Influence of the Processing Parameters on the Microstructure and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

J. Ramos-Grez, Xavier Sánchez-Sánchez, J. L. Mullo, 2024, Journal of Manufacturing and Materials Processing.

Microstructure effect on sliding wear of 316L stainless steel selectively laser melted

J. Ramos-Grez, A. Debut, Germán Omar Barrionuevo, 2024, Materials Science and Technology.