Yu Zhou

发表

Selective laser melting of typical metallic materials: An effective process prediction model developed by energy absorption and consumption analysis

Ming Yan, Yu Zhou, Z. Zhang, 2019, Additive Manufacturing.

Electrospinning of pure polymer-derived SiBCN nanofibers with high yield

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021 .

Polymer-Derived Lightweight SiBCN Ceramic Nanofibers with High Microwave Absorption Performance.

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021, ACS applied materials & interfaces.

A fractal-patterned coating on titanium alloy for stable passive heat dissipation and robust superhydrophobicity

Yu Zhou, D. Jia, Guoliang Chen, 2019, Chemical Engineering Journal.

Processing liquid-feed flame spray pyrolysis synthesized Mg0.5Ce0.2Zr1.8(PO4)3 nanopowders to free standing thin films and pellets as potential electrolytes in all-solid-state Mg batteries

Yu Zhou, D. Jia, B. Liang, 2018 .

O-, N-Coordinated single Mn atoms accelerating polysulfides transformation in lithium-sulfur batteries

Yu Zhou, X. Duan, D. Jia, 2021 .

Nitrogen doped and hierarchically porous carbons derived from chitosan hydrogel via rapid microwave carbonization for high-performance supercapacitors

Yu Zhou, D. Jia, Yaming Wang, 2017 .

High voltage asymmetric supercapacitor based on MnO2 and graphene electrodes

Lixin Guo, Yaming Wang, Yu Zhou, 2013 .

Effects of morphotropic phase boundary on the electric behavior of Er/Ti co-doped BiFeO3 ceramics

G. Zeng, Yu Zhou, Fangzhe Li, 2019, Scripta Materialia.

Electric/magnetic behaviors of Nd/Ti co-doped BiFeO3 ceramics with morphotropic phase boundary

Yu Zhou, Fangzhe Li, D. Jia, 2019, Scripta Materialia.

Reversible modulation of magnetic anisotropy and coercivity triggered by external bias voltage in CoFe2O4/Pb(Mg1/3Nb2/3)O3–PbTiO3 multiferroic heterostructures

Weiqi Wang, Yu Zhou, M. Feng, 2019, Applied Surface Science.

Ablation behavior and mechanism of boron nitride - magnesium aluminum silicate ceramic composites in an oxyacetylene combustion flame

Zhihua Yang, Yu Zhou, X. Duan, 2018 .

Synthesis and electrochemical performance of LiCrxMn2−xO4 powders by mechanical activation and rotary heating

Yu Zhou, G. Song, Yujin Wang, 2004 .

Synthesis and electrochemical characterization of LiMn2−xAlxO4 powders prepared by mechanical alloying and rotary heating

Yu Zhou, Zhimou Xu, G. Song, 2003 .

Nanoindentation, nanoscratch, and nanotensile testing of poly(vinylidene fluoride)‐polyhedral oligomeric silsesquioxane nanocomposites

Yu Zhou, Yizhi Liu, E. Hu, 2012 .

Direct ink writing of continuous SiO2 fiber reinforced wave-transparent ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2020, Journal of Advanced Ceramics.

Gradient Structural Bone-Like Apatite Induced by Chitosan Hydrogel via Ion Assembly

Yu Zhou, D. Jia, Baoqiang Li, 2011, Journal of biomaterials science. Polymer edition.

Grafting triphenylamine groups onto polysiloxanes to improve interaction between the electrochromic films and ITO

Yu Zhou, Haijun Niu, Wen Wang, 2017 .

3D Printing Graphene Oxide Soft Robotics.

P. Poulin, Yu Zhou, Jing Zhong, 2022, ACS nano.

Kirigami-Inspired Highly Stretchable Nanoscale Devices Using Multidimensional Deformation of Monolayer MoS2

Wei Zheng, Bin Yang, Feng Gao, 2018, Chemistry of Materials.

Influence of ZrO2 Content on the Performances of BN‐ZrO2‐SiC Composites for Application in the Steel Industry

Yu Zhou, J. Rao, Yujin Wang, 2015 .

Effect of SiC content on mechanical properties and thermal shock resistance of BN–ZrO2–SiC composites

Yu Zhou, J. Rao, Yujin Wang, 2014 .

Effect of ZrO2 content on microstructure, mechanical properties and thermal shock resistance of (ZrB2+3Y-ZrO2)/BN composites

Yihe Huang, Yu Zhou, J. Rao, 2013 .

Novel double-ceramic-layer (La0.8Eu0.2)2Zr2O7/YSZ thermal barrier coatings deposited by plasma spraying

Yu Zhou, J. Ouyang, Zhanguo Liu, 2014 .

Novel fabrication of monodispersed peanut-type celestine particles using Sr-EDTA chelating precursors

Yu Zhou, J. Ouyang, Yu-Feng Li, 2008 .

Bimagnetic urchin-like Co3O4/CoFe2O4 nanocomposites: synthesis and magnetic properties

Shan Fan, Yu Zhou, Wen Wang, 2016 .

Enhanced ferroelectric and energy-storage properties of Nb-doped 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics prepared by a multi-ionic sol-gel method

Yu Zhou, Fangzhe Li, D. Jia, 2019, Physica B: Condensed Matter.

Constructing dual ionically cross-linked poly(acrylamide-co-acrylic acid) /chitosan hydrogel materials embedded with chitosan decorated halloysite nanotubes for exceptional mechanical performance

Yu Zhou, D. Jia, Baoqiang Li, 2020 .

Mechanical and dielectric properties of direct ink writing Si2N2O composites

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Direct ink writing of Si2N2O porous ceramic strengthened by directional β-Si3N4 grains

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Mechanical and dielectric properties of 3D printed highly porous ceramics fabricated via stable and durable gel ink

Zhihua Yang, Yu Zhou, Jing Zhong, 2019 .

Formation mechanism of sol-gel synthesized Li7−3Al La3Zr2O12 and the influence of abnormal grain growth on ionic conductivity

Weiqi Wang, Yu Zhou, Yang Liu, 2020 .

Hydrosoluble, UV-crosslinkable and injectable chitosan for patterned cell-laden microgel and rapid transdermal curing hydrogel in vivo.

U. Demirci, Yu Zhou, D. Jia, 2015, Acta biomaterialia.

Hot corrosion of V2O5-coated NdMgAl11O19 ceramic in air at 950 °C

Yu Zhou, J. Ouyang, Zhanguo Liu, 2013 .

Flexible and solid-state asymmetric supercapacitor based on ternary graphene/MnO2/carbon black hybrid film with high power performance

Yu Zhou, D. Jia, Yaming Wang, 2015 .

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

Yu Zhou, X. Duan, D. Jia, 2021 .

Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy

Yu Zhou, D. Jia, Yaming Wang, 2010 .

Hydrothermal transformation of geopolymers to bulk zeolite structures for efficient hazardous elements adsorption.

Yu Zhou, D. Jia, P. He, 2021, The Science of the total environment.

A facile bioinspired strategy for accelerating water collection enabled by passive radiative cooling and wettability engineering

Yu Zhou, D. Jia, Guoliang Chen, 2021 .

pH-responsive UV crosslinkable chitosan hydrogel via "thiol-ene" click chemistry for active modulating opposite drug release behaviors.

Yu Zhou, D. Jia, Baoqiang Li, 2021, Carbohydrate polymers.

Ultraviolet-Crosslinkable and Injectable Chitosan/Hydroxyapatite Hybrid Hydrogel for Critical Size Calvarial Defect Repair In Vivo

Yu Zhou, D. Jia, Baoqiang Li, 2015 .

Fabrication and Characterization of In Situ Porous Si3N4‐Si2N2O‐BN Ceramic

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

Effect of starting PMMA content on microstructure and properties of gel casting BN/Si3N4 ceramics with spherical-shaped pore structures

Zhihua Yang, Yu Zhou, X. Duan, 2013, Journal of Materials Science.

Synthesis of potassium sodium niobate nanostructures by hydrothermal combining with the sol-gel method

Yu Zhou, Wen Wang, Hua Ke, 2016 .

Biosensor Based on Chitosan Nanocomposite

Yu Zhou, D. Jia, Baoqiang Li, 2015 .

Diffusionless Cubic‐to‐Tetragonal Phase Transition and Microstructural Evolution in Sintered Zirconia–Yttria Ceramics

Yu Zhou, T. Sakuma, T. Lei, 1991 .

Polyaniline nanofibers fabricated by electrochemical polymerization: A mechanistic study

Yu Zhou, Ya‐Ping Guo, 2007 .

Multiscale simulations of wedged nanoindentation on nickel

Yu Zhou, Yizhi Liu, Yi Sun, 2012 .

High voltage resistance ceramic coating fabricated on titanium alloy for insulation shielding application

Yu Zhou, D. Jia, Guoliang Chen, 2019, Ceramics International.

BCl3 modified tris(dichloromethylsilylethyl)borane as a precursor for SiBCN ceramics applied in lithium-ion battery anodes

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021 .

Light transmittance in α-SiAlON ceramics: Effects of composition, microstructure, and refractive index anisotropy

Yu Zhou, Zhiguo Zhang, F. Ye, 2012 .

Fabrication and in vitro characterization of magnetic hydroxycarbonate apatite coatings with hierarchically porous structures.

Yu Zhou, D. Jia, Yaping Guo, 2008, Acta biomaterialia.

Si-B-C-N monoliths with LaB6-induced well-developed BN(C) flakes

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Dense, pure SiC monoliths with excellent oxidation resistance sintered at low temperatures and high pressures

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Effect of curing temperature and SiO2/K2O molar ratio on the performance of metakaolin-based geopolymers

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Facile synthesis, microstructure and photophysical properties of core-shell nanostructured (SiCN)/BN nanocomposites

Zhihua Yang, Yu Zhou, D. Jia, 2017, Scientific Reports.

Safe trapping of cesium into doping-enhanced pollucite structure by geopolymer precursor technique.

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of hazardous materials.

Oxidation Resistance of AlPO4 Bonded Ceramic Coating Formed on Titanium Alloy for High‐Temperature Applications

Yu Zhou, Yufeng Zhang, D. Jia, 2015 .

Interplay between storage temperature, medium and leaching kinetics of hazardous wastes in Metakaolin-based geopolymer.

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of hazardous materials.

TEM observation of dynamic distortion in 2Y-PSZ/steel composites

Yu Zhou, X. Duan, T. Lei, 2004 .

Numerical and Experimental Studies of Substrate Melting and Resolidification during Thermal Spraying

Yu Zhou, X. Duan, T. Lei, 2009 .

Formation of SiC whiskers/leucite-based ceramic composites from low temperature hardening geopolymer

Yu Zhou, D. Jia, Song Chen, 2021, Ceramics International.

Effect of pH Values on Conversion of Calcite Crystals into Calcium Phosphate Phases in Buffer Solutions

Yu Zhou, D. Jia, Baoqiang Li, 2007 .

Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti–4.0Fe–7.3Mo composite

Yu Zhou, D. Jia, H. Feng, 2007 .

Effect of heat treatment on microstructure and mechanical properties of ZrC particles reinforced tungsten-matrix composites

Yu Zhou, G. Song, Yujin Wang, 2009 .

Effect of temperature gradient in the disk during sintering on microstructure and mechanical properties of ZrCp/W composite

Yu Zhou, G. Song, Yujin Wang, 2009 .

The mechanical and thermophysical properties of ZrC/W composites at elevated temperature

Yu Zhou, G. Song, Yujin Wang, 2002 .

Compressive deformation behavior of a 30 vol.%ZrCp/W composite at temperatures of 1300-1600 ◦ C

Yu Zhou, G. Song, Yujin Wang, 2008 .

A pinning effect for the enhanced oxidation resistance at 1600 °C of silicoboron carbonitride ceramics with the addition of MXene

Yu Zhou, D. Jia, Xingqi Liao, 2021, Corrosion Science.

Co-growing design of super-repellent dual-layer coating for multiple heat dissipation improvement

Yu Zhou, D. Jia, Guoliang Chen, 2022 .

Scalable-Manufactured Superhydrophobic Multilayer Nanocomposite Coating with Mechanochemical Robustness and High-Temperature Endurance.

Yu Zhou, D. Jia, Guoliang Chen, 2020, ACS applied materials & interfaces.

Novel thermal barrier coatings based on rare-earth zirconates/YSZ double-ceramic-layer system deposited by plasma spraying

Yu Zhou, J. Ouyang, Zhanguo Liu, 2015 .

Chitosan‐induced synthesis of magnetite nanoparticles via iron ions assembly

Yu Zhou, D. Jia, Baoqiang Li, 2008 .

Cell laden and patterned chitosan microgel for micro-scale tissue engineering.

Yu Zhou, Baoqiang Li, Daqing Wei, 2015, Journal of controlled release : official journal of the Controlled Release Society.

Hot corrosion behavior of neodymium magnesium hexaaluminate by vanadium pentoxide in air

Yu Zhou, J. Ouyang, Zhanguo Liu, 2013 .

Influence of doping with various cations on electrical conductivity of apatite-type neodymium silicates

Yu Zhou, J. Ouyang, Zhanguo Liu, 2013 .

Synthesis and electrical conductivity of La10Si5.5B0.5O27 + δ (B = In, Si, Sn, Nb) ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2012 .

Preparation and characterization of LnMgAl11O19 (Ln=La, Nd, Gd) ceramic powders

Yu Zhou, J. Ouyang, Zhanguo Liu, 2013 .

Structural evolution and thermophysical properties of (SmxGd1−x)2Zr2O7 (0 ≤ x ≤ 1.0) ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

High-temperature hot corrosion behavior of gadolinium zirconate by vanadium pentoxide and sodium sulfate in air

Yu Zhou, J. Ouyang, Zhanguo Liu, 2010 .

Influence of ytterbium- and samarium-oxides codoping on structure and thermal conductivity of zirconate ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Hot corrosion behavior of V2O5-coated Gd2Zr2O7 ceramic in air at 700–850 °C

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Behaviour of the tetragonal to monoclinic transition in hot pressed zirconia doped with 2 mol% yttria

Yu Zhou, W. Z. Zhu, Yufeng Zhou, 1993 .

Preparation and mechanical properties of carbon nanotube reinforced barium aluminosilicate glass–ceramic composites

Yu Zhou, Yujin Wang, F. Ye, 2006 .

Ferroelectric domain structures in strained BiFeO3 ceramics synthesized by spark plasma sintering

Yu Zhou, Fangzhe Li, D. Jia, 2020 .

A fluorescent sensor based on a diarylethene-rhodamine derivative for sequentially detecting Cu2+ and arginine and its application in keypad lock

Yu Zhou, D. Jia, Baoqiang Li, 2017 .

Effects of treatment temperature on the reduction of GO under alkaline solution during the preparation of graphene/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

ZnO @ N-doped porous carbon/Co 3 ZnC core–shell heterostructures with enhanced electromagnetic wave attenuation ability

Yu Zhou, D. Jia, Yaming Wang, 2018, Chemical Engineering Journal.

Enhanced sinterability and electrical properties of GdSmZr2O7 by addition of nickel oxide

Yu Zhou, J. Ouyang, Zhanguo Liu, 2013 .

Influence of Fe2O3 addition on the densification and oxygen ion conductivity of the GdSmZr2O7 ceramic

Yu Zhou, J. Ouyang, Zhe Ren, 2014 .

Highly Dense Amorphous Si2BC3N Monoliths with Excellent Mechanical Properties Prepared by High Pressure Sintering

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Electron beam “ballooned” carbon sphere derived from graphene oxide by a hydrazine assisted hydrothermal method

P. Xiao, Yu Zhou, D. Jia, 2014 .

Effect of reduced graphene oxide content on the microstructure and mechanical properties of graphene–geopolymer nanocomposites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effect of metal oxides on the densification and electrical conductivity of the GdSmZr2O7 ceramic

Yu Zhou, J. Ouyang, Zhanguo Liu, 2014 .

Preparation and mechanical performance of ductile Csf/Al2O3–BN composites—Part 2: Effects of fiber contents and ablation properties

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Preparation and mechanical performance of ductile Csf/Al2O3-BN composites, Part 1: Effects of fiber length and sintering temperature

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Mineralization of Chitosan via Alternate Soaking

Yu Zhou, D. Jia, Baoqiang Li, 2007 .

Microwave absorbing property optimization of starlike ZnO/reduced graphene oxide doped by ZnO nanocrystal composites.

Yu Zhou, D. Jia, Yaming Wang, 2017, Physical chemistry chemical physics : PCCP.

Reduced graphene oxide decorated with in-situ growing ZnO nanocrystals: Facile synthesis and enhanced microwave absorption properties

Yu Zhou, D. Jia, Yaming Wang, 2016 .

Bi-fluctuation in Na0.5Bi0.5TiO3 ferroelectric ceramics with abnormal relaxor behaviour

Yu Zhou, Fangzhe Li, D. Jia, 2019, Philosophical Magazine.

Texture and anisotropy of hot-pressed h-BN matrix composite ceramics with in situ formed YAG

Yu Zhou, D. Jia, Delong Cai, 2021, Journal of Advanced Ceramics.

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of the European Ceramic Society.

Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3–AlN addition by liquid-phase sintering

Yu Zhou, X. Duan, D. Jia, 2019, Rare Metals.

Anisotropic properties of textured h-BN matrix ceramics prepared using 3Y2O3-5Al2O3(-4MgO) as sintering additives

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of the European Ceramic Society.

Inhibiting crystallization mechanism of h-BN on α-cordierite in BN-MAS composites

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Review on the properties of hexagonal boron nitride matrix composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Zhihua Yang, Z. Wang, Yu Zhou, 2016 .

A novel BN–MAS system composite ceramics with greatly improved mechanical properties prepared by low temperature hot-pressing

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

In-situ preparation of fully stabilized graphene/cubic-leucite composite through graphene oxide/geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Preparation and thermophysical properties of (NdxGd1−x)2Zr2O7 ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2008, Journal of Materials Science.

Effects of mesoporous structure and UV irradiation on in vitro bioactivity of titania coatings

Yu Zhou, D. Jia, Haixiong Tang, 2010 .

High bone-like apatite-forming ability of mesoporous titania films

Yu Zhou, D. Jia, Haixiong Tang, 2010 .

Effects of graphene oxide on the geopolymerization mechanism determined by quenching the reaction at intermediate states

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

Metal organic framework-derived CoZn alloy/N-doped porous carbon nanocomposites: tunable surface area and electromagnetic wave absorption properties

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Structure evolution, amorphization and nucleation studies of carbon-lean to -rich SiBCN powder blends prepared by mechanical alloying

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Effect of CaO addition on the structure and electrical conductivity of the pyrochlore-type GdSmZr2O7

Yu Zhou, J. Ouyang, Zhanguo Liu, 2012 .

Preparation, structure and electrical conductivity of pyrochlore-type samarium–lanthanum zirconate ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2011 .

Electrical conductivity of samarium–ytterbium zirconate ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Synthesis and characterization of nano-sized BaxSr1−xSO4 (0 ≤ x ≤ 1) solid solution by a simple surfactant-free aqueous solution route

Yu Zhou, J. Ouyang, Yufeng Li, 2009 .

Facile fabrication of SrSO4 nanocrystals with different crystallographic morphologies via a simple surfactant-free aqueous solution route

Yu Zhou, J. Ouyang, Yufeng Li, 2008 .

Engineering the Optoelectronic Properties of 2D Hexagonal Boron Nitride Monolayer Films by Sulfur Substitutional Doping.

Yu Zhou, D. Jia, P. Hu, 2022, ACS applied materials & interfaces.

Immobilization behavior of Sr in geopolymer and its ceramic product

Zhihua Yang, Yu Zhou, D. Jia, 2019, Journal of the American Ceramic Society.

Effect of fiber content on the microstructure and mechanical properties of carbon fiber felt reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Rapid and high yield synthesis of carbon dots with chelating ability derived from acrylamide/chitosan for selective detection of ferrous ions

Guanxiong Liu, Yu Zhou, D. Jia, 2019, Applied Surface Science.

New generation of chitosan-(acrylic acid)-magnetite nanospheres: synthesis, characterization and cell viability test in vitro.

Yu Zhou, D. Jia, Baoqiang Li, 2011, Journal of controlled release : official journal of the Controlled Release Society.

Effect of alumina addition on the phase evolution and thermal conductivity of ZrO2–NdO1.5 ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Improved mechanical properties and directional heat transfer performance of h-BN matrix multilayer composites with alternately stacked untextured/textured layers

Yu Zhou, D. Jia, Delong Cai, 2022, Ceramics International.

On the formation mechanisms and properties of MAX phases: A review

Yu Zhou, S. van der Zwaag, D. Jia, 2021, Journal of the European Ceramic Society.

Effect of ball milling treatment on the microstructures and properties of Cr2AlC powders and hot pressed bulk ceramics

Yu Zhou, X. Duan, D. Jia, 2019 .

Synthesis route and mechanical properties of reactive hot pressed TiN–TiB2 ceramics

Yu Zhou, J. Ouyang, W. Sloof, 2013 .

Chitosan Hemostatic Dressing

Shuqi Wang, Yu Zhou, D. Jia, 2015 .

Enhanced mechanical properties, thermal shock resistance and ablation resistance of Si2BC3N ceramics with nano ZrB2 addition

Zhihua Yang, Yu Zhou, D. Jia, 2019, Journal of the European Ceramic Society.

Superhydrophobic double-layer coating for efficient heat dissipation and corrosion protection

Yu Zhou, D. Jia, Yaming Wang, 2019, Chemical Engineering Journal.

Correlations between the in vitro and in vivo bioactivity of the Ti/HA composites fabricated by a powder metallurgy method.

Yu Zhou, C. Ning, 2008, Acta biomaterialia.

Mechanical and unlubricated tribological properties of titanium-containing diamond-like carbon coatings

Yu Zhou, S. Sasaki, J. Ouyang, 2009 .

Preparation and in vitro characterization of crack-free mesoporous titania films

Yu Zhou, D. Jia, Haixiong Tang, 2011 .

Principles, design, structure and properties of ceramics for microwave absorption or transmission at high-temperatures

Zhihua Yang, Yu Zhou, Daxin Li, 2021, International Materials Reviews.

Novel mixed a/-SiAlONs with both elongated a and grains

Haijiao Zhang, Yu Zhou, Zhiguo Zhang, 2009 .

Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Microstructural evolution of amorphous Si2BC3N nanopowders upon heating at high temperatures: High pressures reverse the nucleation order of SiC and BN(C)

F. Tian, Zhihua Yang, Xiaoyun Li, 2018 .

Two dielectric anomalies and impedances of the x CoFe2O4 - (1-x) Bi3.15Nd0.85Ti3O12 (x = 0, 0.3, 0.5) ceramics with coherent interfaces

G. Zeng, Yu Zhou, D. Jia, 2017 .

Ferroelectric properties of magnetoelectric CoFe2O4/Bi3.15Nd0.85Ti3O12 composite ceramics with coherent-lattice interfaces

Yu Zhou, D. Jia, Wen Wang, 2017 .

Crystallization process of lanthanum-substituted bismuth titanate synthesized by a facile sol–gel method

Yu Zhou, D. Jia, Wen Wang, 2010 .

Ni(PO3)2/CNTs hybrid architecture via phthalocyanine modulated self-assemblies for efficient hydrogen evolution reaction

Yu Zhou, D. Jia, Qingfeng Sun, 2022, Applied Surface Science.

Synthesis and structural evolution of dual-boron-source-modified polysilazane derived SiBCN ceramics

Zhihua Yang, Yu Zhou, Qingqing Chen, 2016 .

Boron‐dependent microstructural evolution, thermal stability, and crystallization of mechanical alloying derived SiBCN

Zhihua Yang, Yu Zhou, Qingqing Chen, 2018 .

Decoupled pH‐ and Thermo‐Responsive Injectable Chitosan/PNIPAM Hydrogel via Thiol‐Ene Click Chemistry for Potential Applications in Tissue Engineering

Yu Zhou, D. Jia, Baoqiang Li, 2020, Advanced healthcare materials.

Effects of spark plasma sintering on ferroelectricity of 0.8Bi3.15Nd0.85Ti3O12-0.2CoFe2O4 composite ceramic

Bin Yang, Yu Zhou, D. Jia, 2018 .

Synthesis mechanism of amorphous Si 2 BC 3 N powders: Structural evolution of 2Si‐BN‐3C mixtures during mechanical alloying

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Preparation, microstructure, and thermophysical properties of Cr3+-modified cordierite high emissivity ceramic for metal thermal protection

Yu Zhou, D. Jia, Guoliang Chen, 2022, Journal of Alloys and Compounds.

Hollow graphene spheres self-assembled from graphene oxide sheets by a one-step hydrothermal process

P. Xiao, Yu Zhou, D. Jia, 2013 .

The hydrothermal treated Zn-incorporated titania based microarc oxidation coating: Surface characteristics, apatite-inducing ability and antibacterial ability

Yu Zhou, D. Jia, Yaming Wang, 2018, Surface and Coatings Technology.

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020, Science China Technological Sciences.

Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Effects of graphite on the mechanical and microwave absorption properties of geopolymer based composites

Yu Zhou, D. Jia, Jingkun Yuan, 2017 .

Effects of pore size on microstructure, mechanical and dielectric properties of gel casting BN/Si3N4 ceramics with spherical-shaped pore structures

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Microstructure and Mechanical Properties of W-ZrC Composites Synthesized by Reactive Melt Infiltration of Zr2Cu into Porous Preforms from Partially Carburized W Powders

Yu Zhou, J. Ouyang, G. Song, 2018, Journal of Materials Engineering and Performance.

Microarc oxidation coating covered Ti implants with micro-scale gouges formed by a multi-step treatment for improving osseointegration.

Yu Zhou, D. Jia, Yaming Wang, 2017, Materials science & engineering. C, Materials for biological applications.

MC3T3-E1 cells' response and osseointegration of bioactive sphene-titanium oxide composite coatings fabricated by a hybrid technique of microarc oxidation and heat treatment on titanium.

Yu Zhou, D. Jia, Yaming Wang, 2014, Journal of materials chemistry. B.

Microstructure and mechanical properties of Al2O3 particle reinforced LiTaO3 piezoelectric ceramic matrix composites

Yu Zhou, D. Jia, Youfeng Zhang, 2007 .

Sol–gel synthesis of Bi3.25La0.75Ti3O12 nanotubes

Yu Zhou, D. Jia, Wen Wang, 2011 .

Sol–Gel synthesis of SrBi2Ta2O9 nanowires

Yu Zhou, Wen Wang, Hua Ke, 2010 .

Electrophoretic sol–gel synthesis of SrBi2Ta2O9 nanowires

Yu Zhou, D. Jia, Wen Wang, 2010 .

Synthesis and characterization of ferroelectric SrBi2Ta2O9 nanotubes arrays

Yu Zhou, D. Jia, Wen Wang, 2009 .

Ablation mechanism and properties of SiCf/SiBCN ceramic composites under an oxyacetylene torch environment

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

H2Ti5O11·H2O nanorod arrays formed on a Ti surface via a hybrid technique of microarc oxidation and chemical treatment

Yu Zhou, D. Jia, Yaming Wang, 2015 .

Crystallisation process of Bi5Ti3FeO15 multiferroic nanoparticles synthesised by a sol–gel method

Yu Zhou, D. Jia, Wen Wang, 2017, Journal of Sol-Gel Science and Technology.

Crystallization kinetics and microstructure evolution of reduced graphene oxide/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

In Situ Processing of Graphene/Leucite Nanocomposite Through Graphene Oxide/Geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Magnetic Chitosan/Hydroxyapatite Nanocomposite via In Situ Hybridization Strategy

Yu Zhou, D. Jia, Baoqiang Li, 2007 .

Effects of O2 and N2 sintering atmospheres on electric properties of 0.9SrTiO3–0.1NiFe2O4 composite ceramics

Bin Yang, Yu Zhou, Fangzhe Li, 2019, Physica B: Condensed Matter.

Effects of high pressure on the low-temperature sintering of dense amorphous SiBCN monoliths

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of the European Ceramic Society.

Microstructural features and properties of the nano-crystalline SiC/BN(C) composite ceramic prepared from the mechanically alloyed SiBCN powder

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Microstructure and valence bonds of Si-B-C-N-Al powders synthesized by mechanical alloying

Zhihua Yang, Yu Zhou, D. Jia, 2012 .

Effects of Na+ substitution Cs+ on the microstructure and thermal expansion behavior of ceramic derived from geopolymer

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Electrical conductivity and thermal expansion of neodymium–ytterbium zirconate ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2010 .

Role of boron addition on phase composition, microstructural evolution and mechanical properties of nanocrystalline SiBCN monoliths

Y. G. Liu, Zhihua Yang, Yu Zhou, 2017 .

Strengthening and toughening effects of MWCNTs on Si2BC3N ceramics sintered by SPS technique

Zhihua Yang, Yu Zhou, D. Jia, 2018 .

Densification, microstructural evolution and mechanical properties of Si-B-C-N monoliths with LaB6 addition

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Microstructure and thermal stabilities in various atmospheres of SiB0.5C1.5N0.5 nano-sized powders fabricated by mechanical alloying technique

Zhihua Yang, Yu Zhou, X. Duan, 2010 .

Microstructures and properties of SiB0.5C1.5N0.5 ceramics consolidated by mechanical alloying and hot pressing

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Fabrication and characterization of amorphous SiBCN powders

Zhihua Yang, Yu Zhou, D. Jia, 2007 .

Thermal expansion and thermal conductivity of SmxZr1−xO2−x/2 (0.1 ≤ x ≤ 0.5) ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Two-step sintering of TiB2–40wt%TiN composites

Yu Zhou, J. Ouyang, Yujin Wang, 2019, International Journal of Refractory Metals and Hard Materials.

Microstructure and mechanical properties of TiB2-40 wt% TiC composites: Effects of adding a low-temperature hold prior to sintering at high temperatures

Yu Zhou, J. Ouyang, Yujin Wang, 2018, Ceramics International.

Synthesis of high-purity, isotropic or textured Cr2AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders

S. Zwaag, Yu Zhou, X. Duan, 2015 .

Microstructure and mechanical properties of the spark plasma sintered Ta2C ceramics

Yu Zhou, Zhiguo Zhang, Han Liu, 2012 .

Spark plasma sintering of cBN/β-SiAlON composites

Haijiao Zhang, Yu Zhou, F. Ye, 2010 .

Self-reinforced Y-α-sialon ceramics with barium.aluminosilicate as an additive

Haijiao Zhang, Yu Zhou, Caili Su, 2003 .

Effect of post heat treatment on microstructure and mechanical properties of Lu-doped α-SiAlONs

Yu Zhou, Chunfeng Liu, F. Ye, 2009 .

Effect of the Amount of Additives and Post-Heat Treatment on the Microstructure and Mechanical Properties of Yttrium–α-Sialon Ceramics

Michael J. Hoffmann, Yu Zhou, M. Iwasa, 2003 .

Thermal evolution of lithium ion substituted cesium-based geopolymer under high temperature treatment, Part I: Effects of holding temperature

Zhihua Yang, Yu Zhou, X. Duan, 2018, Ceramics International.

Novel geopolymer based composites reinforced with stainless steel mesh and chromium powder

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

In situ processing of MWCNTs/leucite composites through geopolymer precursor

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Effects of Li Substitution on the Microstructure and Thermal Expansion Behavior of Pollucite Derived from Geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Preparation of fully stabilized cubic-leucite composite through heat-treating Cs-substituted K-geopolymer composite at high temperatures

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Effect of High-Temperature Heat Treatment on Mechanical Property of Cr-Geopolymer Composite

Yu Zhou, Meirong Wang, D. Jia, 2011 .

Thermal evolution and crystallization kinetics of potassium-based geopolymer

Yu Zhou, Meirong Wang, D. Jia, 2011 .

Low-temperature synthesis of BiFeO3 nanopowders via a sol–gel method

Yu Zhou, D. Jia, Wen Wang, 2009 .

Microstructure and thermal shock behavior of sol–gel introduced ZrB2 reinforced SiBCN matrix

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of Sol-Gel Science and Technology.

The fabrication and hydrophobic property of micro-nano patterned surface on magnesium alloy using combined sparking sculpture and etching route

Yu Zhou, D. Jia, Yaming Wang, 2016 .

Domain structures in hot-press sintered SrBi2Ta1.6Nb0.4O9 and SrBi2Ta2O9 ferroelectric ceramics

Yu Zhou, D. Jia, Wen Wang, 2012 .

Microstructure and Ferroelectric Domains of SrBi2Ta1.6Nb0.4O9

Yu Zhou, D. Jia, Wen Wang, 2007 .

Fabrication and Properties of SrBi2(Ta1-xNbx)2O9 Ferroelectric Ceramics

Yu Zhou, D. Jia, Haijun Niu, 2007 .

Ferroelectric Phase Transition Investigated by Thermal Analysis and Raman Scattering in SrBi2Ta2O9 Nanoparticles

Yu Zhou, D. Jia, Wen Wang, 2007 .

Preparation and properties of SrBi2.2 Ta2O9 thin film

Yu Zhou, D. Jia, Wen Wang, 2005 .

X-Ray Diffraction and Raman Scattering Study of Sr1-xBi2+yTa2O9 Nanoparticles

Yu Zhou, D. Jia, Hua Ke, 2005 .

Synthesis and characterization of nanosized SrBi2Ta2O9 powder by a novel sol–gel process

Yu Zhou, D. Jia, Wen Wang, 2002 .

Room-temperature multiferroic and magnetodielectric properties of SrTiO3/NiFe2O4 composite ceramics

Yu Zhou, D. Jia, Hua Ke, 2019, Ceramics International.

Structural evolution and electrical properties of Na0.5Bi0.5TiO3-CoFe2O4 ceramics with embedded structures

Yu Zhou, Fangzhe Li, D. Jia, 2018, Ceramics International.

Effect of magnetic CoFe2O4 component on sintering densification process of Bi3.15Nd0.85Ti3O12 ceramics

Yu Zhou, D. Jia, Wen Wang, 2017 .

Fabrication and Microstructure of SrBi2Ta2O9 Ceramic

Yu Zhou, Jian Yang, Haijun Niu, 2007 .

Flexible Optical Synapses Based on In2Se3/MoS2 Heterojunctions for Artificial Vision Systems in the Near-Infrared Range.

Yu Zhou, D. Jia, P. Hu, 2022, ACS applied materials & interfaces.

Preparation and characterization of Cf/Pollucite composites through geopolymer precursors

Zhangwei Chen, C. Lao, Yu Zhou, 2021, Ceramics International.

Effects of kinds of alkali-activated ions on geopolymerization process of geopolymer cement pastes

Zhangwei Chen, C. Lao, Yu Zhou, 2021, Construction and Building Materials.

Effects of high-temperature heat treatment on the microstructure and mechanical performance of hybrid Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

SiC fiber reinforced geopolymer composites, part 2: Continuous SiC fiber

Zhihua Yang, Yu Zhou, Pengfei Wang, 2016 .

Progress on the formation of ceramics and ceramic-based composites through geopolymer precursors

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Effect of heat treatment on microstructure evolution and mechanical properties of selective laser melted Ti–6Al–4V and TiB/Ti–6Al–4V composite: A comparative study

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Stacking faults formation mechanism of in situ synthesized TiB whiskers

Yu Zhou, D. Jia, Q. Meng, 2006 .

Fabrication of practically pure Si2N2O ceramic with high performance from amorphous BN surface modified nano-sized Si3N4 powders

Haijiao Zhang, Yu Zhou, Qiang Liu, 2018 .

Mesoporous structure and evolution mechanism of hydroxycarbonate apatite microspheres

Yu Zhou, D. Jia, Ya-Jun Guo, 2010 .

Fabrication of monodisperse mesoporous hydroxycarbonate apatite microspheres by emulsion method

Yu Zhou, D. Jia, Ya-Jun Guo, 2010 .

Fabrication of hydroxycarbonate apatite coatings with hierarchically porous structures.

Yu Zhou, D. Jia, Yaping Guo, 2008, Acta biomaterialia.

On Targets Strength of Ceramic Materials for Impacting Penetration

Yu Zhou, Jun Ma, Yi Sun, 2000 .

SiBCN-reduced graphene oxide (rGO) ceramic composites derived from single-source-precursor with enhanced and tunable microwave absorption performance

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021, Carbon.

Mechanism of superior luminescent and high-efficiency photocatalytic properties of Eu-doped calcium aluminate by low-cost self-propagating combustion synthesis technique

Yang Zhao, Yu Zhou, D. Jia, 2017, Scientific Reports.

Spark plasma sintering and improved fracture toughness of silicoboron carbonitride ceramics with the integration of 2D MXene

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Nonswelling injectable chitosan hydrogel via UV crosslinking induced hydrophobic effect for minimally invasive tissue engineering.

Yu Zhou, D. Jia, Baoqiang Li, 2021, Carbohydrate polymers.

Probabilistic Modeling for Composites with Particle Interface Degrading

M. Nakagaki, Yu Zhou, Hua-Jian Chang, 2004 .

Mineralization of chitosan rods with concentric layered structure induced by chitosan hydrogel

Yu Zhou, D. Jia, Baoqiang Li, 2009, Biomedical materials.

Microstructure and In Vitro Bioactivities of HA/Ti Composites Prepared by Hot Isostatic Pressing

Yu Zhou, D. Jia, Hua Ke, 2007 .

Preparation and anisotropic properties of textured structural ceramics: A review

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of Advanced Ceramics.

Microwave-dielectric and magnetic properties of Ta-doped BiFeO3 nanopowders

Yu Zhou, D. Jia, Wen Wang, 2009 .

Achieving near equiaxed α-Ti grains and significantly improved plasticity via heat treatment of TiB reinforced titanium matrix composite manufactured by selective laser melting

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Facile One-Step Fabrication of Multilayer Nanocomposite Coating for Radiative Heat Dissipation

Yu Zhou, D. Jia, Yaming Wang, 2019, ACS Applied Electronic Materials.

A self-adjusting PTFE/TiO2 hydrophobic double-layer coating for corrosion resistance and electrical insulation

Yu Zhou, D. Jia, Guoliang Chen, 2020 .

Influence of electrolyte compositions on structure and high-temperature oxidation resistance of microarc oxidation coatings formed on Ti2AlNb alloy

Yu Zhou, Yaming Wang, J. Ouyang, 2015 .

Characteristic and in vitro bioactivity of a microarc-oxidized TiO(2)-based coating after chemical treatment.

Yu Zhou, D. Jia, Yaming Wang, 2007, Acta biomaterialia.

Growth mechanism of in situ TiB whiskers in spark plasma sintered TiB/Ti metal matrix composites

Yu Zhou, D. Jia, J. Rao, 2006 .

Defects formation of the in situ reaction synthesized TiB whiskers

Yu Zhou, D. Jia, Rong Yu, 2009 .

Microstructural Characterization of In Situ TiB Whiskers in Ti MMCs Fabricated by SPS

Yu Zhou, D. Jia, Q. Meng, 2007 .

Spark plasma sintering of functionally graded material in the Ti–TiB2–B system

Yu Zhou, D. Jia, Q. Meng, 2005 .

Microstructural Characterization of Spark Plasma Sintered In Situ TiB Reinforced Ti Matrix Composite by EBSD and TEM

Yu Zhou, D. Jia, Q. Meng, 2005 .

Microstructure and mechanical properties of in situ TiB reinforced titanium matrix composites based on Ti–FeMo–B prepared by spark plasma sintering

Yu Zhou, D. Jia, Q. Meng, 2004 .

Microstructural characterisation of in situ TiB/Ti matrix composites prepared by mechanical alloying and hot pressing

Yu Zhou, J. Huo, D. Jia, 2004 .

Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

In-situ SEM analysis of brittle plasma electrolytic oxidation coating bonded to plastic aluminum substrate: Microstructure and fracture behaviors

Yu Zhou, D. Jia, Yaming Wang, 2019, Materials Characterization.

An Nb2O5-SiO2-Al2O3/NbSi2/Nb5Si3 multilayer coating on Nb-Hf alloy to improve oxidation resistance

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Evolution of Phase, Microstructure and ZrC Lattice Parameter in Solid-solution-treated W-ZrC Composite

Yu Zhou, J. Rao, Yujin Wang, 2017, Scientific Reports.

A rhodamine-based sensor for Hg2+ and resultant complex as a fluorescence sensor for I−

Yu Zhou, D. Jia, Baoqiang Li, 2016 .

EIS study of a self-repairing microarc oxidation coating

Yu Zhou, D. Jia, Yaming Wang, 2011 .

Microstructure and corrosion resistance of modified 2024 Al alloy using surface mechanical attrition treatment combined with microarc oxidation process

Yu Zhou, Yaming Wang, J. Ouyang, 2011 .

Grain growth kinetics and densification mechanism of (TiZrHfVNbTa)C high-entropy ceramic under pressureless sintering

Yu Zhou, Yujin Wang, Lei Chen, 2021, Journal of Materials Science & Technology.

A molecular dynamics simulation study to investigate the elastic properties of PVDF and POSS nanocomposites

Yu Zhou, Yi Sun, F. Zeng, 2011 .

Molecular simulations of the miscibility in binary mixtures of PVDF and POSS compounds

Yu Zhou, Yi Sun, F. Zeng, 2009 .

Preparation and microstructural characterization of (Nd1−xGdx)2(Ce1−xZrx)2O7 solid solutions

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

The shape effect of manganese(II,III) oxide nanoparticles on the performance of electrochemical capacitors

Yu Zhou, X. Duan, D. Jia, 2018, Electrochimica Acta.

Physical and surface characteristics of the mechanically alloyed SiBCN powder

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Hydrothermal fabrication of rGO/Apatite layers on AZ31 magnesium alloy for enhanced bonding strength and corrosion resistance

Yu Zhou, D. Jia, Yaming Wang, 2019, Applied Surface Science.

Effect of cesium substitution on the thermal evolution and ceramics formation of potassium-based geopolymer

Meirong Wang, Yu Zhou, Meirong Wang, 2010 .

Highly reliable double-layer coatings on magnesium alloy surfaces for robust superhydrophobicity, chemical durability and electrical property

Yu Zhou, D. Jia, Yaming Wang, 2021, Ceramics International.

Fabrication and characterization of hydroxycarbonate apatite with mesoporous structure

Yu Zhou, D. Jia, Haixiong Tang, 2009 .

Influence of residual stress on magnetoelectric coupling of bilayered CoFe2O4/PMN–PT thin films

Yu Zhou, D. Jia, Wen Wang, 2011 .

Formation mechanism, degradation behavior, and cytocompatibility of a double-layered structural MAO/rGO-CaP coating on AZ31 Mg.

Yu Zhou, D. Jia, Yaming Wang, 2020, Colloids and surfaces. B, Biointerfaces.

Rapidly formation of the highly bioactive surface with hydroxyapatite crystals on the titania micro arc oxidation coating by microwave hydrothermal treatment

Yu Zhou, D. Jia, Yaming Wang, 2019, Applied Surface Science.

Formation of Concentric Multilayers in a Chitosan Hydrogel Inspired by Liesegang Ring Phenomena

Yu Zhou, Baoqiang Li, Yujie Feng, 2011, Journal of biomaterials science. Polymer edition.

From bulk to porous structures: Tailoring monoclinic SrAl 2 Si 2 O 8 ceramic by geopolymer precursor technique

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Insight into hexacelsian-to-celsian transformation in hot-pressed BN/BAS composites

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Mechanical alloying derived SiBCN-Ta4HfC5 composite ceramics: study on amorphous transformation mechanism

Zhihua Yang, Yu Zhou, D. Jia, 2022, Journal of Non-Crystalline Solids.

Study on oxidation resistance and oxidative damage mechanism of SiBCN-Ta4HfC5 composite ceramics

Yu Zhou, D. Jia, Daxin Li, 2021, Corrosion Science.

Discovery of ABO4 scheelites with the extra low thermal conductivity through high-throughput calculations

Yanchun Zhou, Yu Zhou, Bin Liu, 2020 .

Fracture Behavior of SiC-Whisker-Reinforced Barium Aluminosilicate Glass-Ceramic Matrix Composites

Litong Zhang, Yu Zhou, F. Ye, 2001 .

Tough Magnetic Chitosan Hydrogel Nanocomposites for Remotely Stimulated Drug Release.

Yu Zhou, D. Jia, Baoqiang Li, 2018, Biomacromolecules.

Effect of Re2O3–MgO additives on the microstructure evolution and properties of β-Si3N4 ceramics

Yu Zhou, D. Jia, Delong Cai, 2021 .

Fabrication of gel cast BN/Si3N4 composite ceramics from surface-coated BN powder

Yu Zhou, D. Jia, Shengjin Wang, 2015 .

Preparation and photoluminescence properties of Er3+-doped La2Zr2O7 nanocrystals

Yu Zhou, J. Ouyang, Yu-Jun Jin, 2015 .

Factors controlling pure-phase multiferroic BiFeO3 powders synthesized by chemical co-precipitation

Yu Zhou, D. Jia, Z. Lü, 2011 .

Structure and multiferroic properties of BiFeO3 powders

Yu Zhou, D. Jia, Wen Wang, 2009 .

Synthesis of α-SiC/α-SiAlON composites by spark plasma sintering: Phase formation and microstructures development

Yu Zhou, F. Ye, Xiu-lan He, 2011 .

Composition dependent intrinsic defect structures in ASnO3 (A = Ca, Sr, Ba)

B. Liu, Yu Zhou, D. Jia, 2020 .

Thermal properties and thermal shock resistance of BAS-BN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Effects of BN on the microstructural evolution and mechanical properties of BAS-BN composites

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Microstructure compatibility and its effect on the mechanical properties of the α-SiC/β-Si3N4 co-reinforced barium aluminosilicate glass ceramic matrix composites

Yu Zhou, Zhiguo Zhang, F. Ye, 2010 .

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Advanced Ceramics.

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Novel Method for Fabrication of Silicon Nitride/Silicon Oxynitride Composite Ceramic Foams Using Fly Ash Cenosphere as a Pore‐Forming Agent

Yu Zhou, D. Jia, Y. Shao, 2008 .

Microstructural and mechanical characterization of fly ash cenosphere/metakaolin-based geopolymeric composites

Meirong Wang, Yu Zhou, Meirong Wang, 2011 .

Effects of high-temperature heat treatment on the mechanical properties of unidirectional carbon fiber reinforced geopolymer composites

Tiesong Lin, Meirong Wang, Yu Zhou, 2010 .

Microstructure, mechanical properties and thermal conductivity of (Ti0.5Nb0.5)C–SiC composites

Yu Zhou, Yujin Wang, Lei Chen, 2021, Ceramics International.

Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites: Effects of sintering temperatures

Yu Zhou, Zhiguo Zhang, Han Liu, 2012 .

Enhanced ablation resistance of HfB2-HfC/SiBCN ceramics under an oxyacetylene torch environment

Zhihua Yang, Yu Zhou, Yongjiang Huang, 2021, Corrosion Science.

Microstructural evolution and mechanical properties of in situ nano Ta4HfC5 reinforced SiBCN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Advanced Ceramics.

Dense amorphous Si2BC1-4N monoliths resistant to high-temperature oxidation for hypersonic vehicle

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Effects of TaC addition on microstructure and mechanical properties of SiBCN composite ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2019 .

Metastable Si-B-C-N ceramics and their matrix composites developed by inorganic route based on mechanical alloying: Fabrication, microstructures, properties and their relevant basic scientific issues

Zhihua Yang, Yu Zhou, D. Jia, 2018, Progress in Materials Science.

Oxidation behavior of SiBCN-Zr composites at 1500 °C prepared by reactive spark plasma sintering

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2018 .

Effects of boron addition on the high temperature oxidation resistance of dense sSiBCN monoliths at 1500 °C

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Thermal ablation behavior of SiBCN-Zr composites prepared by reactive spark plasma sintering

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2017 .

High temperature oxidation kinetics of amorphous silicoboron carbonitride monoliths and silica scale growth mechanisms determined by SIMS

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Influence of sol-gel derived ZrB2 additions on microstructure and mechanical properties of SiBCN composites

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2017 .

A novel in situ synthesis of SiBCN-Zr composites prepared by a sol-gel process and spark plasma sintering.

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2016, Dalton transactions.

Amorphous silicoboron carbonitride monoliths resistant to flowing air up to 1800 °C

Zhihua Yang, Yu Zhou, D. Jia, 2016 .

Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites

Zhihua Yang, Yu Zhou, X. Duan, 2012, Journal of Advanced Ceramics.

Ablation properties and mechanisms of BN-coated Cf-reinforced SiBCNZr ceramic composites under an oxyacetylene combustion torch

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

In situ ZrC/Si-B-C-N monoliths prepared by sol-gel and reactive hot-pressing: Processing, microstructure, mechanical properties and oxidation behavior

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of Alloys and Compounds.

Influence of ball milling parameters on the structure of the mechanically alloyed SiBCN powder

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

High-temperature oxidation resistance of dense amorphous boron-rich SiBCN monoliths

Zhihua Yang, Yu Zhou, X. Duan, 2019, Corrosion Science.

Crystallization and microstructural evolution process from the mechanically alloyed amorphous SiBCN powder to the hot-pressed nano SiC/BN(C) ceramic

Zhihua Yang, Yu Zhou, X. Duan, 2012, Journal of Materials Science.

Preparation and thermophysical properties of NdxZr1-xO2-x/2 (x=0.1, 0.2, 0.3, 0.4, 0.5) ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2008 .

Fast bonding α-SiAlON ceramics by spark plasma sintering

Yu Zhou, Zhiguo Zhang, F. Ye, 2010 .

Reactive sintering behavior and enhanced densification of (Ti,Zr)B2–(Zr,Ti)C composites

Yu Zhou, J. Ouyang, Yujin Wang, 2020 .

Influence of gadolinia on thermal expansion property of ZrO2–4.5 mol%Y2O3 ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Osseointegration of bioactive microarc oxidized amorphous phase/TiO2 nanocrystals composited coatings on titanium after implantation into rabbit tibia

Yu Zhou, D. Jia, Yaming Wang, 2014, Journal of Materials Science: Materials in Medicine.

The effect of applied voltages on the structure, apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface

Yu Zhou, D. Jia, Yaming Wang, 2018, Bioactive materials.

ROS scavenging carbon dot chelated hydroxyapatite filler: Target synthesis and enhancing adhesion of hydrogel

Guanxiong Liu, Yu Zhou, D. Jia, 2022, Composites Communications.

Synergistic effects of elastic modulus and surface topology of Ti-based implants on early osseointegration

Yu Zhou, Xuliang Deng, Ming-ming Xu, 2016 .

Biocorrosion resistance of coated magnesium alloy by microarc oxidation in electrolyte containing zirconium and calcium salts

Yu Zhou, D. Jia, Yaming Wang, 2014, Frontiers of Materials Science.

Evolution Mechanism of Calcium Carbonate in Solution

Yu Zhou, D. Jia, Haixiong Tang, 2010 .

Effects of Si/Al ratio on the structure and properties of metakaolin based geopolymer

Shuai Fu, Meirong Wang, Pengfei Wang, 2016 .

Preparation, structure and electrical conductivity of pyrochlore-type Gd1−xEu2xSm1−xZr2O7 ceramics with a constant lattice parameter

Yu Zhou, J. Ouyang, Zhanguo Liu, 2011 .

Effect of Sm substitution for Gd on the electrical conductivity of fluorite-type Gd2Zr2O7

Yu Zhou, J. Ouyang, Zhanguo Liu, 2008 .

Heat capacities and derived thermodynamic functions of neodymium–gadolinium zirconates from 298.15 to 1050 K

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Electrical conductivity of defect fluorite-type (Gd1−xYbx)2Zr2O7 solid solutions

Yu Zhou, J. Ouyang, Zhanguo Liu, 2010 .

Effect of the starting AlN content on the phase formation and property of the novel in-situ fabricated X-SiAlON/BN composites

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of the European Ceramic Society.

Microstructure and mechanical properties of SiC platelet reinforced (α + β) sialon ceramic composites

T. Wei, Yu Zhou, Y. Yu, 1998 .

Sc3+–Lu3+‐Doped α‐SiAlONs

Yu Zhou, Chunfeng Liu, F. Ye, 2008 .

Investigation on the microstructure of self-reinforced Nd-α-sialon ceramics

Yu Zhou, Chunfeng Liu, F. Ye, 2008 .

Inhibiting Effect of Additives on Formation of ZrC Phase in ZrB2–BN Composites by Reactive Hot Pressing

Yu Zhou, G. Song, Yujin Wang, 2012 .

Biomimetic apatite deposited on microarc oxidized anatase-based ceramic coating

Yu Zhou, D. Jia, Daqing Wei, 2008 .

Transformation of nacre coatings into apatite coatings in phosphate buffer solution at low temperature.

Yu Zhou, Yaping Guo, 2008, Journal of biomedical materials research. Part A.

Characteristic, cell response and apatite-induction ability of microarc oxidized TiO2-based coating containing P on Ti6Al4V before and after chemical-treatment and dehydration

Yu Zhou, Daqing Wei, Chunhui Yang, 2009 .

Microstructure and mechanical properties of hot pressed Al2O3–ZrO2 ceramics prepared from ultrafine powders

Yu Zhou, Q. Ge, T. Lei, 1991 .

Mechanical properties and plasma erosion resistance of BNp/Al2O3-SiO2 composite ceramics

Daren Yu, Zhihua Yang, Fengbo Ren, 2013 .

Mechanical properties and plasma erosion resistance of BNp/Al2O3-SiO2 composite ceramics

Fengbo Ren, Yu Zhou, D. Jia, 2013, Journal of Central South University.

High infrared transmission of Y3+–Yb3+-doped α-SiAlON

Haijiao Zhang, Yu Zhou, Jie Yu, 2008 .

Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Microstructure and mechanical properties of the α-SiAlON/α-SiC composites: Effects of heat treatment

Yu Zhou, F. Ye, Limeng Liu, 2011 .

Mechanical /thermal Shock Properties and Failure Mechanisms of Cf/SiBCN Composites Effect of Sintering Densification and Fiber Coating

Zhihua Yang, Bin Wang, Yu Zhou, 2021 .

A facile strategy for fabricating self-sealing dense coating grown in-situ on porous silicon nitride ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Effect of h-BN on the mechanical and dielectric properties of porous h-BN/Si3N4 composite ceramics prepared by gel casting

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Characterization of porous silicon nitride/silicon oxynitride composite ceramics produced by sol infiltration

Yu Zhou, D. Jia, Y. Shao, 2010 .

Refractory self-reinforced Y-α-SiAlON with barium aluminosilicate glass ceramic addition

Haijiao Zhang, Yu Zhou, F. Ye, 2008 .

Structure and thermal conductivity of Gd2(TixZr1 − x)2O7 ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2008 .

Novel TiC-based composites with enhanced mechanical properties

Yu Zhou, Zhikun Zhang, J. Ouyang, 2021 .

Mechanical properties and microstructural evolution of pressureless sintered ceramics obtained from high-energy ball-milled TiB2–TiC powders

Yu Zhou, J. Ouyang, H. Gu, 2021, Materials Science and Engineering: A.

Reactive hot pressing of super hard (Ti,Ta)(B,C)–(Ta,Ti)C composites

Yu Zhou, J. Ouyang, H. Gu, 2021 .

In situ reaction and solid solution induced hardening in (Ti,Zr)B 2 ‐(Zr,Ti)C composites

Yu Zhou, J. Ouyang, H. Gu, 2020 .

Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites

Yu Zhou, Zhiguo Zhang, F. Ye, 2011 .

Rapid synthesis of Ti alloy with B addition by spark plasma sintering

Yu Zhou, D. Jia, Q. Meng, 2005 .

Preparation, microstructures, mechanical properties and oxidation resistance of SiBCN/ZrB2–ZrN ceramics by reactive hot pressing

Zhihua Yang, Yu Zhou, D. Jia, 2015 .

Thermomechanical properties of TiC particle-reinforced tungsten composites for high temperature applications

Yu Zhou, G. Song, Yujin Wang, 2003 .

Processing and characterization of SiB0.5C1.5N0.5 produced by mechanical alloying and subsequent spark plasma sintering

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Fabrication of Si2N2O Ceramic Foam by Combination of Direct Ink Writing and Biological Foaming Techniques

Zhihua Yang, Yu Zhou, D. Jia, 2020, Advanced Engineering Materials.

Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites

Yu Zhou, D. Jia, Dechang Jia, 2005 .

Mo–SiBCN metal-ceramic composites with enhanced and tunable thermophysical properties and thermal shock resistance

Zhihua Yang, Yu Zhou, B. Liang, 2021, Ceramics International.

Improved Oxidation Resistance of Zirconium Carbide at 1500°C by Lanthanum Hexaboride Additions

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

ZrC–ZrB2 matrix composites with enhanced toughness prepared by reactive hot pressing

Zhihua Yang, Yu Zhou, X. Duan, 2010 .

SiC-nanoparticle-reinforced Si3N4 matrix composites

Yu Zhou, L. Tian, Wen Zhou, 1998 .

Influence of Composition on Self-toughening and Oxidation Properties of Y-α-Sialons

Yu Zhou, Yudong Huang, Chunfeng Liu, 2013 .

High-temperature strength and oxidation behavior of Sc3+/Lu3+ co-doped α-sialon

Yu Zhou, Chunfeng Liu, F. Ye, 2009 .

Microstructure and properties of self-reinforced α-sialon ceramics doped with Lu2O3

Yu Zhou, Chunfeng Liu, F. Ye, 2008 .

Study on microstructures and mechanical properties of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing

Yu Zhou, D. Jia, Xiu-lan He, 2009 .

Incorporation of BN-coated carbon fibers into ZrB2/SiBCN ceramic composites and their ablation behavior

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Improvement of high-temperature mechanical properties of heat treated Cf/geopolymer composites by Sol-SiO2 impregnation

Meirong Wang, Yu Zhou, Meirong Wang, 2010 .

Oxidation resistance of hot-pressed SiC–BN composites

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Ablation mechanism and properties of in-situ SiAlON reinforced BN–SiO2 ceramic composite under an oxyacetylene torch environment

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

High-temperature oxidation behavior of dense SiBCN monoliths: Carbon-content dependent oxidation structure, kinetics and mechanisms

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Effects of in situ amorphous graphite coating on ablation resistance of SiC fiber reinforced SiBCN ceramics in an oxyacetylene flame

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Ablation behavior and mechanism of SiCf/Cf/SiBCN ceramic composites with improved thermal shock resistance under oxyacetylene combustion flow

Zhihua Yang, Yu Zhou, D. Jia, 2015 .

Influence of reactive melt infiltration parameters on microstructure and properties of low temperature derived Cf/ZrC composites

Yu Zhou, J. Ouyang, J. Rao, 2013 .

Thermal Shock Behavior of Nd-Doped α-Sialon Ceramics

Chongxing Liu, Yu Zhou, Y. Huang, 2010 .

Microstructure, oxidation and thermal shock resistance of graphene reinforced SiBCN ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2016 .

SiC fiber reinforced geopolymer composites, part 1: Short SiC fiber

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Study on the oxygen diffusion in the oxide layers of SiBCN ceramics by SIMS

Yu Zhou, D. Jia, Daxin Li, 2021, Journal of the European Ceramic Society.

Crystallinity dependence of high-temperature oxidation of silicoboron carbonitride monoliths

Zhihua Yang, Yu Zhou, D. Jia, 2021, Corrosion Science.

Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Oxidation of ZrC–30 vol% SiC composite in air from low to ultrahigh temperature

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Ternary Phase ZrxCuyCz in Reactively Infiltrated ZrC/W Composite

Yu Zhou, G. Song, Yujin Wang, 2011 .

Ternary Phase Zr x Cu y C z in Reactively Infiltrated ZrC / W Composite

Yu Zhou, G. Song, Yujin Wang, 2011 .

Optical properties of in situ toughened ScLu―α-SiAlON

Yu Zhou, Chunfeng Liu, F. Ye, 2009 .

Effect of carbide particles on the ablation properties of tungsten composites

Yu Zhou, G. Song, Yujin Wang, 2003 .

Effect of Preforming Process and Starting Fused SiO2 Particle Size on Microstructure and Mechanical Properties of Pressurelessly Sintered BNp/SiO2 Ceramic Composites

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Microstructure and mechanical properties of SiCf/SiBCN ceramic matrix composites

Zhihua Yang, Yu Zhou, X. Duan, 2015, Journal of Advanced Ceramics.

Effect of magnesium aluminum silicate glass on the thermal shock resistance of BN matrix composite ceramics

J. Hosson, Zhihua Yang, Yu Zhou, 2017 .

Densification, mechanical and thermal properties of ZrC1 − x ceramics fabricated by two-step reactive hot pressing of ZrC and ZrH2 powders

Yu Zhou, J. Ouyang, Haibin Zhang, 2018 .

Pressureless sintering of ZrC-based ceramics by enhancing powder sinterability

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Dense sub-micron-sized ZrC-W composite produced by reactive melt infiltration at 1200 °C

Yu Zhou, Yujin Wang, Yanwei Zhao, 2012 .

Reactive wetting and infiltration of polycrystalline WC by molten Zr2Cu alloy

Yu Zhou, P. Shen, Yujin Wang, 2011 .

Dense submicron-sized ZrC – W composite produced by reactive melt in fi ltration at 1200 ° C

Yu Zhou, Yujin Wang, Yanwei Zhao, 2011 .

Microstructure and mechanical properties of Mo-ZrC-Cu composites synthesized by reactive melt infiltration of Zr-Cu melt into porous Mo2C preforms at 1300 °C

Yu Zhou, G. Song, Yujin Wang, 2018, Materials Chemistry and Physics.

Microstructure and properties of ZrC–W composite fabricated by reactive infiltration of Zr2Cu into WC/W preform

Yu Zhou, Junpeng Li, G. Song, 2015 .

Hot Corrosion of Potential Thermal Barrier Coating Material (SM1‐XYBX)2ZR2O7 by V2O5 and NA2SO4

Yu Zhou, J. Ouyang, Zhanguo Liu, 2011 .

Preparation and mechanical properties of laminated B4C–TiB2/BN ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2021, Ceramics International.

A New Heating Route of Spark Plasma Sintering and its Effect on Alumina Ceramic Densification

Yu Zhou, Zhiguo Zhang, F. Ye, 2013 .

Spark plasma sintering and toughening of graphene platelets reinforced SiBCN nanocomposites

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Characteristic of microarc oxidized coatings on titanium alloy formed in electrolytes containing chelate complex and nano-HA

Yu Zhou, D. Jia, Yaming Wang, 2007 .

Structure of calcium titanate/titania bioceramic composite coatings on titanium alloy and apatite deposition on their surfaces in a simulated body fluid

Yaming Wang, Yu Zhou, D. Jia, 2007 .

Bioactive coating with hierarchical double porous structure on titanium surface formed by two-step microarc oxidation treatment

Yu Zhou, D. Jia, Yaming Wang, 2014 .

Mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium and deposition and release of cefazolin sodium/chitosan films

Yu Zhou, Daqing Wei, S. Cheng, 2011 .

Effect of Ti substitution for Zr on the thermal expansion property of fluorite-type Gd2Zr2O7

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Effects of passing a direct current on densification of SiC ceramics with 10 wt.% Al2O3 – Y2O3 as an additive

Yu Zhou, F. Ye, Limeng Liu, 2015 .

Mechanical properties and thermal shock resistance of Si2BC3N ceramics with ternary Al4SiC4 additive

Zhihua Yang, Yu Zhou, D. Jia, 2018, Ceramics International.

Processing and mechanical performance of 3D Cf/SiCN composites prepared by polymer impregnation and pyrolysis

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Carbon‐content‐dependent phase composition, microstructural evolution, and mechanical properties of SiBCN monoliths

Y. G. Liu, Zhihua Yang, Yu Zhou, 2018 .

Effect of Si/C ratio and their content on the microstructure and properties of Si-B-C-N Ceramics prepared by spark plasma sintering techniques

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Preparation of SiCN(O) Material with Vinyl Trichlorosilane

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Microstructure Characteristics and High‐Temperature Performance of In‐Situ Reinforced α‐SiAlON Ceramics

Yu Zhou, Chunfeng Liu, F. Ye, 2010 .

Microstructure of Different Rare-Earth-Doped α-Sialon Ceramics

Yong Liang Wang, Chongxing Liu, Yu Zhou, 2007 .

Heat capacity measurements on YbxGd2−xZr2O7 (x = 0, 1, 2) ceramics by differential scanning calorimetry

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Effect of TiB2 content on microstructure and mechanical properties of in-situ fabricated TiB2/B4C composites

Yu Zhou, Yujin Wang, Yu Feng, 2011 .

Simple and scalable synthesis of super-repellent multilayer nanocomposite coating on Mg alloy with mechanochemical robustness, high-temperature endurance and electric protection

Yu Zhou, D. Jia, Yaming Wang, 2021 .

The structure and in vitro apatite formation ability of porous titanium covered bioactive microarc oxidized TiO2-based coatings containing Si, Na and Ca

Yu Zhou, D. Jia, Yaming Wang, 2014 .

One-step fabrication of double-layer nanocomposite coating by plasma electrolytic oxidation with particle addition

Yu Zhou, D. Jia, Guoliang Chen, 2022, Applied Surface Science.

Liquid-phase plasma assisted electrophoresis and sintering SiC/hBN nanocomposite ceramic coating on aluminum alloy for radiative heat dissipation

Yu Zhou, Yaming Wang, Yongchun Zou, 2020 .

Plasma electrolytic oxidation induced ‘local over-growth’ characteristic across substrate/coating interface: Effects and tailoring strategy of individual pulse energy

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Titania nanotube/nano-brushite composited bioactive coating with micro/nanotopography on titanium formed by anodic oxidation and hydrothermal treatment

Yu Zhou, D. Jia, Yaming Wang, 2015 .

Formation bioactive MAO coatings on titanium and its alloys for inducing biomimetic apatite

Yu Zhou, Daqing Wei, 2018 .

Bioactive Microarc Oxidized TiO2-based Coatings for Biomedical Implication

Yu Zhou, Daqing Wei, 2011 .

Effect of applied voltage on the structure of microarc oxidized TiO2-based bioceramic films

Yu Zhou, D. Jia, Yaming Wang, 2007 .

Structure of microarc oxidized coatings containing Si, Ca and Na on titanium and deposition of cefazolin sodium/chitosan composite film

Yu Zhou, Daqing Wei, S. Cheng, 2011 .

The composite films of gradient TiO2-based/nano-scale hydrophilic sodium titanate: Biomimetic apatite induction and cell response

Yu Zhou, Daqing Wei, Chunhui Yang, 2009 .

Preparation and high temperature oxidation resistance of microarc oxidation ceramic coatings formed on Ti2AlNb alloy

Yu Zhou, J. Ouyang, Zhanguo Liu, 2012 .

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Yu Zhou, K. Tokunaga, X. Tan, 2019, International Journal of Refractory Metals and Hard Materials.

Formation of CaTiO3/TiO2 composite coating on titanium alloy for biomedical applications.

Yu Zhou, D. Jia, Yaming Wang, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Structures, bonding strength and in vitro bioactivity and cytotoxicity of electrochemically deposited bioactive nano-brushite coating/TiO2 nanotubes composited films on titanium

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Preparation and in-situ high-temperature mechanical properties of Cf-SiCf reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

In situ fabrication and characterization of graphene/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2015 .

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of the European Ceramic Society.

UV-crosslinkable and thermo-responsive chitosan hybrid hydrogel for NIR-triggered localized on-demand drug delivery.

Yu Zhou, D. Jia, Yaming Wang, 2017, Carbohydrate polymers.

Characterization of domain configurations in LiTaO3/Al2O3 ceramic composites

Yu Zhou, M. Fang, Zhaohui Huang, 2011 .

Effect of BaTi4O9 fibers on dielectric properties of 0.64BaTi4O9+0.36BaPr2Ti4O12 composites

Yu Zhou, Yinglin Song, Zhaohua Jiang, 2002 .

Effect of ZrC particle size on microstructure and room temperature mechanical properties of ZrCp/W composites

Yu Zhou, G. Song, Yujin Wang, 2010 .

Insights into intragranular precipitation and toughening effect of W in (Ti, W)C solid solution with TiH2 as the inducer

Yu Zhou, Xinghong Zhang, J. Ouyang, 2019, Ceramics International.

Microstructure and mechanical properties of ZrC-TaCx composite fabricated by displacive compensation of porosity at 1300 °C

Yu Zhou, Yujin Wang, Dong Wang, 2018 .

W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into partially carburized W preforms

Yu Zhou, J. Ouyang, Yujin Wang, 2017 .

Microstructure and mechanical properties of ZrCW matrix composite prepared by reactive infiltration at 1300 °C

Yu Zhou, Junpeng Li, G. Song, 2013 .

Thermal shock resistance of in situ formed SiC–BN composites

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Effect of sintering additives on microstructures and mechanical properties of short-carbon-fiber-reinforced SiC composites prepared by precursor pyrolysis–hot pressing

Yu Zhou, D. Jia, Xiu-lan He, 2006 .

Microstructures of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing

Yu Zhou, D. Jia, Xiu-lan He, 2008 .

Low temperature sintering of ZrC–SiC composite

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Hot corrosion behavior of NbSi2/SiO2-Nb2O5 multilayer coating on Nb alloy

Yu Zhou, D. Jia, Yaming Wang, 2018, Journal of Alloys and Compounds.

Influences of SrSO4 and Ag on High Temperature Tribological Properties of Spark-Plasma-Sintered ZrO2(Y2O3)-Al2O3 Composites

Yu Zhou, S. Sasaki, Yaming Wang, 2010 .

HIGH TEMPERATURE TRIBOLOGICAL PROPERTIES OF SPARK-PLASMA-SINTERED Al2O3-SrSO4 SELF-LUBRICATING NANOCOMPOSITES INCORPORATED WITH AND WITHOUT Ag ADDITION

Yu Zhou, S. Sasaki, Yaming Wang, 2009 .

High Temperature Tribology and Solid Lubrication of Advanced Ceramics

Yu Zhou, S. Sasaki, Yaming Wang, 2008 .

Spark Plasma Sintered ZrO2(Y2O3)-Al2O3-SrSO4 Self-Lubricating Nanocomposites for High Temperature Tribological Applications

Yu Zhou, S. Sasaki, D. Jia, 2007 .

Tribological Properties of Spark-Plasma-Sintered Al 2 O 3 -SrSO 4 Self-Lubricating Nanocomposites at Elevated Temperatures

Yu Zhou, S. Sasaki, Yaming Wang, 2009 .

Enhanced mechanical properties and thermal shock resistance of Si2BC3N ceramics with SiC coated MWCNTs

Zhihua Yang, Yu Zhou, D. Jia, 2019, Journal of Advanced Ceramics.

Effect of Polycarbosilane Content on Microstructures and Mechanical Properties of Short-Carbon-Fibre-Reinforced SiC Composites

Yu Zhou, D. Jia, Xiu-lan He, 2006 .

Experimental description of thermomechanical properties of carbon fiber-reinforced TiC matrix composites

Yu Zhou, Suk‐Joong L. Kang, G. Song, 2003 .

Effect of W content on the ablation properties of W-ZrC composites synthesized by reactive melt infiltration under oxyacetylene flame

Yu Zhou, G. Song, Yujin Wang, 2018, International Journal of Refractory Metals and Hard Materials.

Chemical treatment of TiO2-based coatings formed by plasma electrolytic oxidation in electrolyte containing nano-HA, calcium salts and phosphates for biomedical applications

Yu Zhou, D. Jia, Yaming Wang, 2008 .

Electrical properties of the GdSmZr2O7 ceramic under different sintering conditions

Yu Zhou, J. Ouyang, Zhanguo Liu, 2012 .

Electrical conductivity of 5 mol.% Yb2O3 and 5 mol.% Gd2O3 co-doped Sm2Zr2O7

Yu Zhou, J. Ouyang, Zhanguo Liu, 2011 .

Effect of gadolinia on phase structure and thermal conductivity of ZrO2–4.5 mol%Y2O3 ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2008 .

Phase stability and thermal expansion property of ZrO2–NdO1.5–AlO1.5 ceramics from 50 to 1550 °C

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Effects of sintering temperature on the microstructure and properties of h-BN ceramics with MAS as liquid sintering aid

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

MAS-content dependence of the texture and fracture behavior of h-BN-MAS composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Enhanced thermal shock and oxidation resistance of Si2BC3N ceramics through MWCNTs incorporation

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of Advanced Ceramics.

Enhanced mechanical properties, thermal shock resistance and oxidation resistance of Si2BC3N ceramics with Zr-Al addition

Zhihua Yang, Yu Zhou, D. Jia, 2018 .

Preparation and mechanical performance of Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

Carbon content-dependent microstructures, surface characteristics and thermal stability of mechanical alloying derived SiBCN powders

Zhihua Yang, Yu Zhou, X. Duan, 2018 .

Corrosion kinetics and corrosion mechanisms of BN–ZrO2–SiC composites in molten steel

Yu Zhou, J. Ouyang, Yujin Wang, 2014 .

Crack-healing ability and strength recovery of different hot-pressed TZ3Y20A–SiC ceramics by heat treatment in air

Yu Zhou, Yaming Wang, J. Ouyang, 2015 .

Effect of NbC content on microstructure and mechanical properties of W-NbC composites

Yu Zhou, G. Song, Yujin Wang, 2018 .

Influence of ZrC content on the elevated temperature tensile properties of ZrCp/W composites

Yu Zhou, G. Song, Yujin Wang, 2011 .

Microstructure and mechanical properties of intragranular W-Cu/TiC-ZrC composite prepared by reactive melt infiltration at 1300 °C

Yu Zhou, G. Song, Yujin Wang, 2018 .

Growth of plasma electrolytic oxidation coatings on Nb and corresponding corrosion resistance

Yu Zhou, D. Jia, Yaming Wang, 2019, Applied Surface Science.

Microarc oxidation of 2024 Al alloy using spraying polar and its influence on microstructure and corrosion behavior

Yu Zhou, Yaming Wang, Dong-bai Sun, 2013 .

Structure, MC3T3-E1 cell response, and osseointegration of macroporous titanium implants covered by a bioactive microarc oxidation coating with microporous structure.

Yu Zhou, D. Jia, Yaming Wang, 2014, ACS applied materials & interfaces.

Microarc oxidized TiO2 based ceramic coatings combined with cefazolin sodium/chitosan composited drug film on porous titanium for biomedical applications.

Yu Zhou, D. Jia, Yaming Wang, 2013, Materials science & engineering. C, Materials for biological applications.

Microstructural, magnetic and electric properties of sol-gel synthesized Na0.5Bi0.5TiO3–CoFe2O4 composites

Yu Zhou, Fangzhe Li, D. Jia, 2020 .

Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Microstructural evolution, mechanical and thermal properties of LaB6 embedded in Si-B-C-N prepared by spark plasma sintering

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Dependence of dielectric behavior in BiFeO3 ceramics on intrinsic defects

P. Withers, Yu Zhou, D. Jia, 2012 .

Mechanical and dielectric properties of gelcasted Si3N4 porous ceramic using CaHPO4 as an additive

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

Zhihua Yang, B. Li, Yu Zhou, 2022, Ceramics International.

Ion sputtering erosion mechanisms of h-BN composite ceramics with textured microstructures

Daren Yu, Zhihua Yang, Yu Zhou, 2014 .

Effect of the BN content on the thermal shock resistance and properties of BN/SiO2 composites fabricated from mechanically alloyed SiBON powders

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Oxidation Properties of Nd-α-Sialon Ceramics

Chongxing Liu, Yu Zhou, F. Ye, 2010 .

Elongation of α‐SiC Particles in Spark Plasma Sintered α‐SiAlON/α‐SiC Composites

Yu Zhou, Zhiguo Zhang, F. Ye, 2011 .

New route to densify tantalum carbide at 1400 °C by spark plasma sintering

Yu Zhou, F. Ye, Limeng Liu, 2011 .

Effect of solid contents on the mechanical properties of SiC–10 wt.%AlN ceramic composites prepared by gelcasting

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

In-situ formation of bulk and porous h-AlN/SiC-based ceramics from geopolymer technique

Zhihua Yang, Yu Zhou, X. Duan, 2019 .

Synergistic effects of surface chemistry and topologic structure from modified microarc oxidation coatings on Ti implants for improving osseointegration.

Yu Zhou, D. Jia, Yaming Wang, 2015, ACS applied materials & interfaces.

Resettable Heterogeneous Catalyst: (Re)Generation and (Re)Adsorption of Ni Nanoparticles for Repeated Synthesis of Carbon Nanotubes on Ni–Al–O Thin Films

K. Sun, Yu Zhou, D. Jia, 2018, ACS Applied Nano Materials.

In situ hybridization to chitosan/magnetite nanocomposite induced by the magnetic field

Yu Zhou, D. Jia, Baoqiang Li, 2006 .

Microstructure and Toughening Mechanisms in an Al2O3 Ceramic Matrix Composite Dispersed with LiTaO3 Particles

Yu Zhou, D. Jia, Y.G. Liu, 2005 .

Domain structures and toughening mechanism in Al2O3 matrix ceramic composites dispersed with piezoelectric LiTaO3

Yu Zhou, D. Jia, Yan’gai Liu, 2003 .

Elevated temperature compressive failure behavior of a 30 vol.%ZrCp/W composite

Yu Zhou, T. Lei, G. Song, 2007 .

Homogeneous Microstructure of ZrO2-BN Composites with In Situ Synthesized BN

Yu Zhou, Lei Chen, Yu Wang, 2014 .

Low-temperature sintering behavior and mechanical properties of BN-ZrO2-SiC composites

Yu Zhou, X. Duan, J. Ouyang, 2017 .

Mechanical Properties and Plasma Erosion Resistance of ZrO2p(3Y)/BN-SiO2 Ceramic Composites under Different Sintering Temperature

Daren Yu, Zhihua Yang, Yu Zhou, 2011, MSE 2011.

Microstructure and erosion resistance of in-situ SiAlON reinforced BN-SiO2 composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2016, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Study on the plasma erosion resistance of ZrO2p(3Y)/BN–SiO2 composite ceramics

Daren Yu, Zhihua Yang, Yu Zhou, 2013 .

Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of the European Ceramic Society.

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2016, Journal of Materials Science.

In Situ Toughened α-Sialon Ceramics Doped with Lutecia and Ytterbia

Yu Zhou, F. Ye, Chunjiang Liu, 2007 .

Thermal shock resistance of the porous boron nitride/silicon oxynitride ceramic composites

Zhihua Yang, Yu Zhou, D. Jia, 2018, International Journal of Applied Ceramic Technology.

Fabrication and properties of embedded dense coating on direct ink writing Si2N2O porous ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

The preparation, microstructure and mechanical properties of a dense MgO–Al2O3–SiO2 based glass-ceramic coating on porous BN/Si2N2O ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2018, RSC advances.

Densification of tantalum carbide ceramics with 5 mol.% Al, Cu, Ag and Au

Yu Zhou, Zhiguo Zhang, Z. Lai, 2013 .

Fabrication and properties of dense α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of the European Ceramic Society.

Effect of holding time on microstructure, mechanical, water resistance and dielectric properties of α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, Yu Zhou, D. Jia, 2018, Ceramics International.

Effects of pore structures on the dielectric properties of silicon nitride-based ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

A strategy for fabricating anisotropic SI 3 N 4 ceramics with controllable mechanical and thermal properties

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Dislocation Behavior in ZrC Particles during Elevated Temperature Compressive Deformation of a 30 vol.% ZrCp/W Composite

Yu Zhou, G. Song, Yujin Wang, 2011 .

Corrosion kinetics and mechanisms of ZrC1−x ceramics in high temperature water vapor

Yu Zhou, Haibin Zhang, S. Peng, 2018, RSC advances.

Crystallization Behavior of Amorphous Si2BC3N Ceramic Monolith Subjected to High Pressure

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Structural and microstructural characterization of SiB0.5C1.5N0.8Al0.3 powders prepared by mechanical alloying using aluminum nitride as aluminum source

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

BBPPAmorphous Si-B-C-N Ceramics Fabricated by High Energy Ball Milling and Hot Pressing

Yu Zhou, D. Jia, Z. Yang, 2007 .

Microstructural characterisation of laser clad coating of nickel based alloy with dissolved SiCp

Yu Zhou, J. Ouyang, Qian Li, 1999 .

Influence of vanadium content on the microstructural evolution and mechanical properties of (TiZrHfVNbTa)C high-entropy carbides processed by pressureless sintering

Jiecai Han, Yu Zhou, C. Xu, 2021, Journal of the European Ceramic Society.

Preparation and mechanical properties of carbon fiber reinforced-TiC matrix composites

Yu Zhou, G. Song, Qiang Li, 2001 .

Mechanical properties of short carbon fiber-reinforced TiC composites produced by hot pressing

G. Wen, Yu Zhou, Qiang Li, 2002 .

Corrosion behavior and microstructural evolution of BN–ZrO2–SiC composites in molten steel

Yu Zhou, X. Duan, J. Ouyang, 2017 .

Densification process of TaC/TaB2 composite in spark plasma sintering ☆

Yu Zhou, F. Ye, Xiu-lan He, 2011 .

Densification, microstructure and mechanical properties of multicomponent (TiZrHfNbTaMo)C ceramic prepared by pressureless sintering

Yu Zhou, J. Ouyang, C. Xu, 2021 .

Microstructure and mechanical properties of (TiZrNbTaMo)C high-entropy ceramic

Yu Zhou, J. Ouyang, C. Xu, 2020 .

The New Complex High-entropy Metal Boron Carbonitride: Microstructure and Mechanical Properties

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Synthesis and thermal stability of novel high-entropy metal boron carbonitride ceramic powders

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Mechanical properties and toughening mechanisms of ceramic composites

Yu Zhou, W. Z. Zhu, Yufeng Zhou, 1991 .

Stacking Faults and Growth Mechanism of In Situ TiB Whiskers and Interface Structures in SPSed TiB/Ti(FeMo) Composites

Yu Zhou, D. Jia, Q. Meng, 2007 .

In Situ TiB Reinforced Titanium Metal Matrix Composites Prepared by Spark Plasma Sintering

Yu Zhou, D. Jia, H. Feng, 2005 .

Effect of particle clustering on the effective modulus of ZrC/W composites

Yu Zhou, G. Song, Yujin Wang, 2009 .

3D-printing of architectured short carbon fiber-geopolymer composite

Zhihua Yang, Yu Zhou, D. Jia, 2021, Composites Part B: Engineering.

Densification, Structure, and Thermophysical Properties of Ytterbium–Gadolinium Zirconate Ceramics

Yu Zhou, J. Ouyang, Zhanguo Liu, 2009 .

Mechanically Robust Polyacrylamide Composite Hydrogel Achieved by Integrating Lamellar Montmorillonite and Chitosan Microcrystalline Structure into Covalently Cross-linked Network

Yu Zhou, D. Jia, Baoqiang Li, 2020 .

3D printing geopolymer nanocomposites: Graphene oxide size effects on a reactive matrix

Zhihua Yang, Yu Zhou, Jing Zhong, 2020 .

Model to determine recrystallization temperature of tungsten based dilute solid solution alloys

Yu Zhou, G. Song, Yujin Wang, 2006 .

Densi cation and crystallisation behaviour of Si–B–O–N ceramics prepared by hot pressing with organic precursors

G. Wen, Yu Zhou, D. Jia, 2002 .

Three-dimensional graphene oxide/polypyrrole composite electrodes fabricated by one-step electrodeposition for high performance supercapacitors

F. Walsh, Xiaohong Li, Yu Zhou, 2015 .

An Investigation of the Microstructural Evolution of a Service-Exposed Turbine Blade

Yu Zhou, Haoyu Ye, Sixian Rao, 2016, Metallography, Microstructure, and Analysis.

Visual in vivo degradation of injectable hydrogel by real-time and non-invasive tracking using carbon nanodots as fluorescent indicator.

Yu Zhou, D. Jia, Yaming Wang, 2017, Biomaterials.

Synthesis, piezoelectric property and domain behaviour of the vertically aligned K1−xNaxNbO3 nanowire with a morphotropic phase boundary

Yu Zhou, D. Jia, Wen Wang, 2017 .

A theoretical strategy of pure carbon materials for lightweight and excellent absorption performance

G. Wen, Yu Zhou, D. Jia, 2020 .

Solvents adjusted pure phase CoCO3 as anodes for high cycle stability

Yu Zhou, D. Jia, Tao Zhang, 2020, Journal of Advanced Ceramics.

MnCO3/Mn3O4/reduced graphene oxide ternary anode materials for lithium-ion batteries: facile green synthesis and enhanced electrochemical performance

Rui Zhang, G. Wen, Yu Zhou, 2017 .

Strong Electron Coupling of Ru and Vacancy-Rich Carbon Dots for Synergistically Enhanced Hydrogen Evolution Reaction.

Yu Zhou, D. Jia, Qingfeng Sun, 2021, Small.

Enhanced mechanical properties of polyacrylamide/chitosan hydrogels by tuning the molecular structure of hyperbranched polysiloxane

Yu Zhou, D. Jia, Baoqiang Li, 2019, Materials & Design.

Zn0.1Ca0.1Sr0.4Ba0.4ZrO3: A non-equimolar multicomponent perovskite ceramic with low thermal conductivity

Yanchun Zhou, Yu Zhou, D. Jia, 2020 .

Molten salt synthesis of nitrogen and oxygen enriched hierarchically porous carbons derived from biomass via rapid microwave carbonization for high voltage supercapacitors

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Carbide Particle-Reinforced Tungsten Composites in Extreme Hazard Environments: Ablation, Thermal Shock, and Finite Element Calculation

Yu Zhou, G. Song, Yujin Wang, 2013 .

Hydrothermal synthesis of pollucite from metakaolin-based geopolymer for hazardous wastes storage

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Seed-mediated growth of ultra-thin triangular magnetite nanoplates.

Zhihua Yang, Yu Zhou, X. Duan, 2017, Chemical communications.

Synthesis of Mg-doped LiMn2O4 powders for lithium-ion batteries by rotary heating

Yu Zhou, G. Song, Wen-Jun Li, 2004 .

Pulsed electrochemical fabrication of graphene/polypyrrole composite gel films for high performance and flexible supercapacitors

Yu Zhou, D. Jia, Zhenyu Li, 2020 .

Materials and fabrication of electrode scaffolds for deposition of MnO2 and their true performance in supercapacitors

F. Walsh, Xiaohong Li, Yu Zhou, 2015 .

Graphene/carbon black hybrid film for flexible and high rate performance supercapacitor

Yan Liu, Yaming Wang, Yu Zhou, 2014 .

Orderly stacked graphene sheets supporting SnO2 nanoparticles as an anode material for lithium-ion batteries with incremental capacity

Yu Zhou, D. Jia, Dongdong Liu, 2021 .

Mn3O4 tetragonal bipyramid laden nitrogen doped and hierarchically porous carbon composite as positive electrode for high-performance asymmetric supercapacitor

Yu Zhou, D. Jia, Yaming Wang, 2020 .

Molecular mechanics simulation on the nanoindentation on POSS nanocomposite

Yu Zhou, Jun Li, Fanlin Zeng, 2007, International Conference on Smart Materials and Nanotechnology in Engineering.

Structure and electrical conductivity of BaCe0.85Ln0.15O3−δ (Ln = Gd, Y, Yb) ceramics

Yu Zhou, J. Ouyang, Yiheng Gu, 2013 .

Evaluation of Tribological Properties of a Cathodic Arc Ion-Plated CrSiN Coating under Both Unlubricated and Boundary-Lubricated Conditions

Yu Zhou, S. Sasaki, J. Ouyang, 2007 .

Al2O3/reduced graphene oxide double-layer radiative coating for efficient heat dissipation

Yu Zhou, D. Jia, Yaming Wang, 2018, Materials & Design.

Finite element analysis of effect of grain orientation on the thermal conduction of h-BN ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Synthesis of Novel Cobalt-Containing Polysilazane Nanofibers with Fluorescence by Electrospinning

Zhihua Yang, Yu Zhou, X. Duan, 2016, Polymers.

Preparation of BiFeO3 Nanopowders Using Acetylacetone as Stabilizer

Yu Zhou, D. Jia, Wen Wang, 2010 .

High-yield synthesis of strong photoluminescent N-doped carbon nanodots derived from hydrosoluble chitosan for mercury ion sensing via smartphone APP.

Lei Wang, Baoqiang Li, Yaming Wang, 2016, Biosensors & bioelectronics.

Conformal coating containing Ca, P, Si and Na with double-level porous surface structure on titanium formed by a three-step microarc oxidation

Yu Zhou, D. Jia, Yaming Wang, 2015 .

The effect of titanium bead diameter of porous titanium on the formation of micro-arc oxidized TiO2-based coatings containing Si and Ca

Yu Zhou, D. Jia, Yaming Wang, 2013 .

Ball-Milled Graphite as an Electrode Material for High Voltage Supercapacitor in Neutral Aqueous Electrolyte

Yu Zhou, D. Jia, Yaming Wang, 2012 .

Efficiently Synergistic Hydrogen Evolution Realized by Trace Amount of Pt-Decorated Defect-Rich SnS2 Nanosheets.

Zhiguo Wang, Yu Zhou, D. Jia, 2017, ACS applied materials & interfaces.

Hyperbranched polysiloxane for highly stretchable and tough hydrogel by one-pot in situ polymerization

Yu Zhou, D. Jia, Baoqiang Li, 2017 .

Facile Co-Electrodeposition Method for High-Performance Supercapacitor Based on Reduced Graphene Oxide/Polypyrrole Composite Film.

Yu Zhou, D. Jia, Yaming Wang, 2017, ACS applied materials & interfaces.

Vertically aligned two-dimensional SnS2 nanosheets with a strong photon capturing capability for efficient photoelectrochemical water splitting

Wei Zheng, Tawfique Hasan, Zhonghua Li, 2017 .

Enhanced microwave absorption properties of ferroferric oxide/graphene composites with a controllable microstructure

Xiaoxiao Huang, Rui Zhang, Long Xia, 2016 .

Shape evolution of two dimensional hexagonal boron nitride single domains on Cu/Ni alloy and its applications in ultraviolet detection

Yu Zhou, D. Jia, P. Hu, 2019, Nanotechnology.

B2O3-assisted low-temperature crystallization of pollucite structures and their potential applications in Cs+ immobilization

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Nuclear Materials.

Direct ink writing of geopolymer with high spatial resolution and tunable mechanical properties

Yu Zhou, Meirong Wang, D. Jia, 2021 .

Controlled growth of six-point stars MoS2 by chemical vapor deposition and its shape evolution mechanism

Wei Zheng, Shiwei Wu, Yunfeng Qiu, 2017, Nanotechnology.

Recent advances in preparation, properties and device applications of two-dimensional h-BN and its vertical heterostructures

Yu Zhou, D. Jia, P. Hu, 2017 .

In-situ reduced graphene oxide/geopolymer composites for efficient Cs+ immobilization

Yu Zhou, D. Jia, P. He, 2021 .

Synthesis, structure and electrical conductivity of BaZr1–xDyxO3–δ ceramics

Yu Zhou, J. Ouyang, Yiheng Gu, 2012 .

Processing and Properties of Ferroelectric Bi4-x La xTi3O12 Ceramics

Yu Zhou, D. Jia, Wen Wang, 2008 .

Intrinsic Dipole Coupling in 2D van der Waals Ferroelectrics for Gate‐Controlled Switchable Rectifier

W. Cao, Bin Yang, Yu Zhou, 2019, Advanced Electronic Materials.

In Vitro Cell Uptake of Biocompatible Magnetite/Chitosan Nanoparticles with High Magnetization: A Single-Step Synthesis Approach for In-Situ-Modified Magnetite by Amino Groups of Chitosan

Yu Zhou, D. Jia, Baoqiang Li, 2012, Journal of biomaterials science. Polymer edition.

Two-Dimensional van der Waals Materials with Aligned In-Plane Polarization and Large Piezoelectric Effect for Self-Powered Piezoelectric Sensors.

W. Cao, Zhiguo Wang, Yu Zhou, 2019, Nano letters.

Energy storage performance of (K, Na)NbO3 ferroelectric thin films with Mn-Ta and Mn-Ti co-doping

Yu Zhou, Chao Zhao, Xianghe Meng, 2019, Ceramics International.

Biologically Inspired Scalable-Manufactured Dual-layer Coating with a Hierarchical Micropattern for Highly Efficient Passive Radiative Cooling and Robust Superhydrophobicity.

Yu Zhou, D. Jia, Guoliang Chen, 2021, ACS applied materials & interfaces.

Robust Inorganic Daytime Radiative Cooling Coating Based on a Phosphate Geopolymer.

Yu Zhou, J. Qiu, D. Jia, 2020, ACS applied materials & interfaces.

Rational design of compact ceramic coating on SiCp/Al composites by tailoring soft sparking discharge of plasma electrolytic oxidation

Yu Zhou, D. Jia, Yaming Wang, 2023, Surface & Coatings Technology.

Theoretical insights into mechanisms of electrochemical reduction of CO2 to ethylene catalyzed by Pd3Au

Yu Zhou, Xin Zhou, M. Zheng, 2022, Applied Surface Science.

Chitosan in-situ grafted magnetite nanoparticles toward mechanically robust and electrically conductive ionic-covalent nanocomposite hydrogels with sensitive strain-responsive resistance

Yu Zhou, D. Jia, Baoqiang Li, 2020 .

Dynamical electric and magnetic responses in the Bi0.85Nd0.15FeO3 ceramic with morphotropic phase boundary

Yu Zhou, Fangzhe Li, D. Jia, 2021 .

Room-temperature template-free synthesis of dumbbell-like SrSO4 with hierarchical architecture

Yu Zhou, S. Sasaki, J. Ouyang, 2010 .

Novel coaxial SiC–SiO2–BN nanocable: large-scale synthesis, formation mechanism and photoluminescence property

Xiaoxiao Huang, Bo Zhong, Xiaodong Zhang, 2011 .

Target-oriented synthesis of high synthetic yield carbon dots with tailored surface functional groups for bioimaging of zebrafish, flocculation of heavy metal ions and ethanol detection

Yu Zhou, D. Jia, Baoqiang Li, 2021 .

3D-printed Lunar regolith simulant-based geopolymer composites with bio-inspired sandwich architectures

Yu Zhou, D. Jia, P. He, 2023, Journal of Advanced Ceramics.

3D Printing of Damage-tolerant Martian Regolith Simulant-based Geopolymer Composites

Yu Zhou, D. Jia, Zuhua Zhang, 2022, Additive Manufacturing.

Printing and electromagnetic characteristics of 3D printing frequency selective surface using graphene

Yu Zhou, D. Jia, Zhe Zhao, 2021, Journal of Materials Science & Technology.

Mechanism of superior luminescent and high-efficiency photocatalytic properties of Eu-doped calcium aluminate by low-cost self-propagating combustion synthesis technique

Yang Zhao, Yu Zhou, D. Jia, 2017, Scientific Reports.

Non-planar vertical photodetectors based on free standing two-dimensional SnS2 nanosheets.

Yu Zhou, D. Jia, P. Hu, 2017, Nanoscale.

First-principles study of the anisotropic thermal expansion and thermal transport properties in h-BN

Zhihua Yang, Yu Zhou, X. Duan, 2020, Science China Materials.

Low Optical Writing Energy Multibit Optoelectronic Memory Based on SnS2 /h-BN/Graphene Heterostructure.

Yu Zhou, D. Jia, P. Hu, 2021, Small.

Evolution of Phase, Microstructure and ZrC Lattice Parameter in Solid-solution-treated W-ZrC Composite

Yu Zhou, J. Rao, Yujin Wang, 2017, Scientific Reports.

Atomistic insight into the structure and diffusion properties of pollucite glass-ceramics

Yu Zhou, D. Jia, P. He, 2022, Ceramics International.

A visibly transparent radiative cooling film with self-cleaning function produced by solution processing

Yu Zhou, J. Qiu, D. Jia, 2021 .

Ultrahigh-yield synthesis of N-doped carbon nanodots that down-regulate ROS in zebrafish.

Yu Zhou, D. Jia, Yaming Wang, 2017, Journal of materials chemistry. B.

Ferroelectrics: Intrinsic Dipole Coupling in 2D van der Waals Ferroelectrics for Gate‐Controlled Switchable Rectifier (Adv. Electron. Mater. 2/2020)

W. Cao, Bin Yang, Yu Zhou, 2020 .

Microstructure and thermal properties of a promising thermal barrier coating: YTaO4

Yu Zhou, Jing Feng, X. Chong, 2016 .

Performances of high voltage electrochemical capacitor using ball-milled graphite/Mn3O4 composite electrodes

Yu Zhou, D. Jia, Yaming Wang, 2012 .

Formation and structure of sphene/titania composite coatings on titanium formed by a hybrid technique of microarc oxidation and heat-treatment

Yu Zhou, Daqing Wei, S. Cheng, 2011 .

Color combination of polysiloxane polymer by introducing two different triphenylamine based pendent groups for electrochromism

Yu Zhou, Wen Wang, Haihong Niu, 2018 .

Influence of composition ratio on ferroelectric, magnetic and magnetoelectric properties of PMN–PT/CFO composite thin films

Yu Zhou, M. Feng, Ao-pei Wang, 2018, Journal of Materials Science: Materials in Electronics.

The effect of NaOH concentration on the steam-hydrothermally treated bioactive microarc oxidation coatings containing Ca, P, Si and Na on pure Ti surface.

Yu Zhou, D. Jia, Yaming Wang, 2015, Materials science & engineering. C, Materials for biological applications.

Characterization and properties of microarc oxidized coatings containing Si, Ca and Na on titanium

Yu Zhou, Daqing Wei, Haifeng Guo, 2011 .

Crystallization Behavior and Multiferroic Properties of Bi3.15Nd0.85Ti3O12/CoFe2O4 Powders Synthesized by Sol–Gel Method

Yu Zhou, D. Jia, Wen Wang, 2016 .

Improvement of grain size and crystallization degree of LPSed h-BN composite ceramics by amorphization/nanocrystallization of raw h-BN powders

Zhihua Yang, Yu Zhou, X. Duan, 2021 .

TEM analysis and in vitro and in vivo biological performance of the hydroxyapatite crystals rapidly formed on the modified microarc oxidation coating using microwave hydrothermal technique

Yu Zhou, D. Jia, Yaming Wang, 2019, Chemical Engineering Journal.

Rapid structural evolution and bone inducing mechanism of the multilayer coating with silicon-doped hydroxyapatite crystals on the microwave water steaming-hydrothermally treated titania coating

Yu Zhou, D. Jia, Yaming Wang, 2021 .

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium.

Yu Zhou, D. Jia, Yaming Wang, 2019, ACS biomaterials science & engineering.

MC3T3-E1 cell response of amorphous phase/TiO2 nanocrystal composite coating prepared by microarc oxidation on titanium.

Yu Zhou, D. Jia, Yaming Wang, 2014, Materials science & engineering. C, Materials for biological applications.

Preparation, cell response and apatite-forming ability of microarc oxidized coatings containing Si, Ca and Na on titanium

Yu Zhou, Daqing Wei, Haifeng Guo, 2011 .

Structure, cell response and biomimetic apatite induction of gradient TiO2-based/nano-scale hydrophilic amorphous titanium oxide containing Ca composite coatings before and after crystallization.

Yu Zhou, Daqing Wei, Chunhui Yang, 2009, Colloids and surfaces. B, Biointerfaces.

Preparation, biomimetic apatite induction and osteoblast proliferation test of TiO2-based coatings containing P with a graded structure

Yu Zhou, Daqing Wei, Yu Zhou, 2009 .

Characteristic and microstructure of the microarc oxidized TiO2-based film containing P before and after chemical- and heat treatment

Yu Zhou, Daqing Wei, Chunhui Yang, 2009 .

Characteristic and biocompatibility of the TiO2-based coatings containing amorphous calcium phosphate before and after heat treatment

Yu Zhou, Daqing Wei, 2009 .

Effect of dehydration on structure and induction capability for apatite formation of microarc oxidized TiO2-based film with chemical modification

Yu Zhou, D. Jia, Yaming Wang, 2008 .

The effect of oxidation time on the micro-arc titanium dioxide surface coating containing Si,Ca and Na

Su Cheng, Yu Zhou, Daqing Wei, 2012 .

Chitosan hydrogels with 3D Liesegang ring structure for rifampicin release.

Yu Zhou, Baoqiang Li, Yujie Feng, 2011, Journal of controlled release : official journal of the Controlled Release Society.

Formation of concentric multi-layer chitosan hydrogel loaded with isoniazid.

Yu Zhou, Baoqiang Li, Yujie Feng, 2011, Journal of controlled release : official journal of the Controlled Release Society.

Chemical etching of micro-plasma oxidized titania film on titanium alloy and apatite deposited on the surface of modified titania film in vitro

Yu Zhou, D. Jia, Yaming Wang, 2008 .

Influence of Applied Voltage on the Structure of Micro-Plasma Oxidized Titania-Based Coatings Formed in an Electrolyte Containing Nano-HA and Calcium Salts and Phosphate

Yu Zhou, D. Jia, Daqing Wei, 2008 .

Effect of heat treatment atmosphere on the structure and apatite-inducing ability of Ca, P, Si and Na incorporated microarc oxidation coating on titanium

Yu Zhou, D. Jia, Yaming Wang, 2017 .

Hierarchical Superhydrophilic/Superaerophobic 3D Porous Trimetallic (Fe, Co, Ni) Spinel/Carbon/Nickel Foam for Boosting Oxygen Evolution Reaction

Yu Zhou, D. Jia, Yaming Wang, 2023, Applied Catalysis B: Environmental.

3D printing of green and environment-friendly rGO@ZnO/GP for removal of methylene blue from wastewater

Yu Zhou, Meirong Wang, D. Jia, 2022, Journal of Physics and Chemistry of Solids.

Mineralization of Bone-Like Apatite in Chitosan Hydrogel

Yong Liang Wang, Yu Zhou, Baoqiang Li, 2010 .

Sintering mechanism and dielectric properties of LiTaO3 matrix composites with the addition of Al2O3 particles

Yu Zhou, D. Jia, Yan’gai Liu, 2009 .

Effect of Al 2 O 3 Content on Dielectric Properties of Al 2 O 3 /LiTaO 3 Composite Ceramics: Effect of Al 2 O 3 Content on Dielectric Properties of Al 2 O 3 /LiTaO 3 Composite Ceramics

Yu Zhou, D. Jia, Youfeng Zhang, 2009 .

Effect of Sintering Process on Microstructure of Al2O3/LiTaO3 Composite Ceramics

Yu Zhou, D. Jia, Youfeng Zhang, 2007 .

Enhanced high-temperature oxidation resistance of HfSi2-modified silicon based multilayer ceramic coating on Nb alloy prepared by a novel strategy

Yu Zhou, D. Jia, Guoliang Chen, 2023, Journal of the European Ceramic Society.

Near unity broadband emissivity and ultralow thermal conductivity from yttrium niobate-based ceramics

Yu Zhou, D. Jia, Guoliang Chen, 2023, Chemical Engineering Journal.

Microstructure, Thermal Conductivity, and Temperature-Dependent Infrared Emissivity of Divalent Transition Metal Ions Doped A-Cordierite Ceramics

Yu Zhou, Yufeng Zhang, D. Jia, 2022, SSRN Electronic Journal.

Dual‐Channel Dielectric Tunability in Highly Textured BaTi0.99Fe0.01O3−δ Ceramics With Micro‐Twin Boundary

Yu Zhou, Fangzhe Li, D. Jia, 2023, Advanced Electronic Materials.

Effects of Ga–Ba Co-doping on the morphology and conductivity of Li7La3Zr2O12 electrolyte synthesized by sol-gel method

Yu Zhou, Ying Tian, Ying Zhou, 2021, Ceramics International.

Facile Synthesis of Morphology Controllable CoFe2O4 Particles as High‐Performance Electrode Materials

Shan Fan, Yu Zhou, Wen Wang, 2018, Particle & Particle Systems Characterization.

Large-size Si3N4 ceramic fabricated by additive manufacturing using long-term stable hydrogel-based suspensions

Zhihua Yang, Yu Zhou, D. Jia, 2023, Additive Manufacturing.

Mineralization of Magnetite Induced by Chitosan Hydrogel

Yong Liang Wang, Yu Zhou, D. Jia, 2010 .

In Situ Mineralization of Magnetite Nanoparticles in Chitosan Hydrogel

Yu Zhou, D. Jia, Baoqiang Li, 2009, Nanoscale research letters.

Sintering and electrical conductivity of the GdSmZr 2 O 7 ceramic with and without ZnO sintering aid

Yu Zhou, J. Ouyang, Zhan-Guo Liu, 2013 .

Energy storage performance of Na0.5K0.5NbO3-P(VDF-TrFE) lead-free composite films

Yu Zhou, Wen Wang, Chao Zhao, 2019, Journal of Sol-Gel Science and Technology.

A facile concentric-layered magnetic chitosan hydrogel with magnetic field remote stimulated drug release

Yu Zhou, Baoqiang Li, Daqing Wei, 2013 .

Crack-healing behavior of hot-pressed TZ3Y20A-SiC ceramics

Yu Zhou, J. Ouyang, Yujin Wang, 2014 .

A Promising Radiation Thermal Protection Coating Based on Lamellar Porous Ca‐Cr co‐Doped Y3NbO7 Ceramic

Yu Zhou, D. Jia, Guoliang Chen, 2023, Advanced Functional Materials.

One-step fabrication of amorphous/ITO-CNTs coating by plasma electrolytic oxidation with particle addition for excellent wear resistance

Yu Zhou, D. Jia, Guoliang Chen, 2023, Applied Surface Science.

MICROSTRUCTURE AND ELECTROCONDUCTIVITY OF TiN-Al2O3 COMPOSITES PREPARED BY HOT-PRESSING

Yu Zhou, X. Duan, D. Jia, 2012 .

Efficiently Synergistic Hydrogen Evolution Realized by Trace Amount of Pt-Decorated Defect-Rich SnS2 Nanosheets.

Zhiguo Wang, Yu Zhou, D. Jia, 2017, ACS applied materials & interfaces.

UV-crosslinkable and thermo-responsive chitosan hybrid hydrogel for NIR-triggered localized on-demand drug delivery.

Yu Zhou, D. Jia, Yaming Wang, 2017, Carbohydrate polymers.

Hydrothermal Synthesis for the Preparation of BaTi5O11 Fibers

Yu Zhou, Yinglin Song, Zhaohua Jiang, 1999 .

Thermal shock damage assessment of a BNW/SiO2 ceramic: Insight from temperature-dependent material properties

Zhihua Yang, Yu Zhou, D. Jia, 2021, Ceramics International.