Hongyu Chen

发表

Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite

R. Poprawe, C. Hong, D. Gu, 2018, Surface and Coatings Technology.

Selective laser melting of high strength and toughness stainless steel parts: The roles of laser hatch style and part placement strategy

D. Gu, Hongyu Chen, 2018 .

Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy

Guanqun Yu, Mujian Xia, D. Gu, 2017 .

Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms

Guanqun Yu, Mujian Xia, D. Gu, 2016 .

Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting

Mujian Xia, D. Gu, Mujian Xia, 2017 .

In fl uence of hatch spacing on heat and mass transfer , thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy

D. Gu, D. Dai, Mujian Xia, 2016 .

Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions

Lei Zhu, Hongyu Chen, Di Wang, 2022, Additive Manufacturing.

Structural optimization of re-entrant negative Poisson's ratio structure fabricated by selective laser melting

D. Gu, D. Dai, Hongyu Chen, 2017 .

Microstructure evolution, mechanical response and underlying thermodynamic mechanism of multi-phase strengthening WC/Inconel 718 composites using selective laser melting

D. Gu, Chenglong Ma, Hongmei Zhang, 2018 .

Mechanisms of laser energy absorption and melting behavior during selective laser melting of titanium-matrix composite: role of ceramic addition

D. Gu, D. Dai, Chenglong Ma, 2020 .

Fragmentation and refinement behavior and underlying thermodynamic mechanism of WC reinforcement during selective laser melting of Ni-based composites

I. Kelbassa, D. Gu, D. Dai, 2019, Journal of Alloys and Compounds.

A force-based method for identifying the deformation modes of thin-walled members

Xuhong Zhou, Dan Gan, Rui Cheng, 2018, Thin-Walled Structures.

Influence of Particle Size on Laser Absorption and Scanning Track Formation Mechanisms of Pure Tungsten Powder During Selective Laser Melting

D. Gu, D. Dai, Hongmei Zhang, 2019, Engineering.

Mechanical performance and corrosion behaviour of Zr-based bulk metallic glass produced by selective laser melting

L. Zhang, D. Gu, M. Zimmermann, 2020, Materials & Design.

Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction

D. Gu, U. Kühn, L. Xi, 2021 .

Achieving high strength and high ductility in WC-reinforced iron-based composites by laser additive manufacturing

D. Gu, U. Kühn, L. Xi, 2020 .

Selective Laser Melting Additive Manufacturing of Hard-to-Process Tungsten-Based Alloy Parts With Novel Crystalline Growth Morphology and Enhanced Performance

D. Gu, D. Dai, Hongyu Chen, 2016 .

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

S. Scudino, Hongyu Chen, Z. Fu, 2021 .

Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility

K. Prashanth, Hongyu Chen, K. Kosiba, 2021, Materials Science and Engineering: A.

Microstructure, mechanical properties and machinability of particulate reinforced Al matrix composites: a comparative study between SiC particles and high-entropy alloy particles

Hongyu Chen, Z. Fu, Weiping Chen, 2020 .

Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion

K. Prashanth, Hongyu Chen, K. Kosiba, 2022, Journal of Materials Science & Technology.

Effects of zirconium element on the microstructure and deuterium retention of W–Zr/Sc2O3 composites

Hongyu Chen, Junling Chen, Yucheng Wu, 2016, Scientific Reports.

Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting

D. Gu, Chenglong Ma, Han Zhang, 2020 .

Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures

Xiancheng Zhang, S. Scudino, Hongyu Chen, 2022, Additive Manufacturing.

A novel approach to direct preparation of complete lath martensite microstructure in tool steel by selective laser melting

D. Gu, D. Dai, Chenglong Ma, 2018, Materials Letters.

Thermodynamic behaviour and formation mechanism of novel titanium carbide dendritic crystals within a molten pool of selective laser melting TiC/Ti–Ni composites

D. Gu, D. Dai, Chenglong Ma, 2017 .

Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance

D. Gu, L. Xi, Hongyu Chen, 2018 .

Carbon Nanotubes Enabled Laser 3D Printing of High-Performance Titanium with Highly Concentrated Reinforcement

R. Poprawe, C. Hong, D. Gu, 2020, iScience.

Microstructure and composition homogeneity, tensile property, and underlying thermal physical mechanism of selective laser melting tool steel parts

D. Gu, D. Dai, Chenglong Ma, 2017 .

Mechanical properties and microstructural change of W–Y2O3 alloy under helium irradiation

Hongyu Chen, Junling Chen, Yucheng Wu, 2015, Scientific Reports.

Laser additive manufactured high-performance Fe-based composites with unique strengthening structure

D. Gu, U. Kühn, Hongyu Chen, 2020 .

Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy

D. Gu, D. Dai, Mujian Xia, 2016 .

Prediction of Young’s Modulus for Injection Molded Long Fiber Reinforced Thermoplastics

Hongyu Chen, D. Baird, 2018, Journal of Composites Science.

A model incorporating the effects of flow type on fiber orientation for flows with mixed flow kinematics

Hongyu Chen, P. Wapperom, D. Baird, 2019, Journal of Rheology.

Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing

D. Gu, Han Zhang, Qing Ge, 2021, International Journal of Minerals, Metallurgy and Materials.

Selective growth of Ni4Ti3 precipitate variants induced by complicated cyclic stress during laser additive manufacturing of NiTi-based composites

D. Gu, D. Dai, Chenglong Ma, 2018, Materials Characterization.

Effect of metallurgical defect and phase transition on geometric accuracy and wear resistance of iron-based parts fabricated by selective laser melting

D. Gu, Hongyu Chen, 2016 .

Influence of substrate surface morphology on wetting behavior of tracks during selective laser melting of aluminum-based alloys

D. Gu, D. Dai, Han Zhang, 2018 .

Thermal behavior and fluid dynamics within molten pool during laser inside additive manufacturing of 316L stainless steel coating on inner surface of steel tube

D. Gu, D. Dai, Qing Ge, 2021, Optics & Laser Technology.

Research on the Settlement Behavior of Ram-Compacted Piles with Bearing Base

Guotang Zhao, Zailiang Xu, Jianlin Ma, 2013 .

Shear-thickening polishing of inner raceway surface of bearing and suppression of edge effect

Xu Wang, B. Lyu, Hongyu Chen, 2022, The International Journal of Advanced Manufacturing Technology.

Achieving exceptional wear resistance in a crack-free high-carbon tool steel fabricated by laser powder bed fusion without pre-heating

T. Gustmann, U. Kühn, S. Scudino, 2023, Journal of Materials Science & Technology.

Effect of solution time on the microstructure, precipitation behavior and mechanical properties of (Co0.5NiFeCrTi0.5 + SiC)p/7075Al hybrid composite

S. Scudino, Hongyu Chen, Z. Fu, 2020 .

Numerical investigation of powder aerosolization in a rotating drum apparatus

Hongyu Chen, L. Turkevich, M. Jog, 2021 .

DEVELOPMENT OF ULTRA-LIGHT HYBRID GLASS FIBER AND POLYMERIC FIBER REINFORCED POLYPROPYLENE COMPOSITES

Hongyu Chen, 2019 .