S. Marussi

发表

Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging

Julian R. Jones, Peter D. Lee, P. Withers, 2018, Additive Manufacturing.

In situ radiographic and ex situ tomographic analysis of pore interactions during multilayer builds in laser powder bed fusion

Peter D. Lee, M. Olbinado, A. Rack, 2020, Additive Manufacturing.

The effect of powder oxidation on defect formation in laser additive manufacturing

Philip J. Withers, Michael Towrie, Robert C. Atwood, 2019, Acta Materialia.

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

Michael Towrie, Philip J Withers, Robert C Atwood, 2018, Nature Communications.

In situ X-ray quantification of melt pool behaviour during directed energy deposition additive manufacturing of stainless steel

Peter D. Lee, I. Todd, S. Marussi, 2021 .

Melt pool morphology in directed energy deposition additive manufacturing process

Peter D. Lee, S. Marussi, R. Atwood, 2020, IOP Conference Series: Materials Science and Engineering.

Correlative Optical and X‐Ray Imaging of Strain Evolution During Double‐Torsion Fracture Toughness Measurements in Shale

Peter D. Lee, M. Mostafavi, S. Marussi, 2018, Journal of Geophysical Research: Solid Earth.

Sinter formation during directed energy deposition of titanium alloy powders

S. Marussi, R. Atwood, Lorna Sinclair, 2022, International Journal of Machine Tools and Manufacture.

A multiscale X-ray phase-contrast tomography dataset of a whole human left lung

P. Tafforeau, S. Verleden, S. Marussi, 2022, Scientific data.

Preparation of large biological samples for high-resolution, hierarchical, multi-modal imaging

P. Tafforeau, S. Marussi, D. Jonigk, 2022, bioRxiv.

Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing

K. Fezzaa, C. L. Leung, S. Marussi, 2021, Nature Communications.

Capturing Marangoni flow via synchrotron imaging of selective laser melting

C. L. Leung, S. Marussi, S. Clark, 2020, IOP Conference Series: Materials Science and Engineering.

The transit to detonation in high explosives

N. Bourne, D. Eastwood, S. Marussi, 2019 .

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

C. L. Leung, S. Marussi, R. Atwood, 2022, Advanced science.

Time resolved in-situ multi-contrast X-ray imaging of melting in metals

M. Endrizzi, C. Rau, S. Marussi, 2022, Scientific Reports.

Imaging intact human organs with local resolution of cellular structures using hierarchical phase-contrast tomography

E. Boller, P. Tafforeau, S. Walker-Samuel, 2021, Nature Methods.

Multiscale three-dimensional imaging of intact human organs down to the cellular scale using hierarchical phase-contrast tomography.

E. Boller, P. Tafforeau, S. Walker-Samuel, 2021, bioRxiv.

Achieving homogeneity in a high-Fe b -Ti alloy laser-printed from blended elemental powders

J. Willmott, A. Phillion, Peter D. Lee, 2021 .

Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing

K. Fezzaa, C. L. Leung, S. Marussi, 2022, Nature Communications.

Keyhole uctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing

K. Fezzaa, C. L. Leung, S. Marussi, 2021 .

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

P. Withers, M. Towrie, C. L. Leung, 2018, Nature Communications.

In-situ Synchrotron imaging of keyhole mode multi-layer laser powder bed fusion additive manufacturing

E. Boller, M. Olbinado, A. Rack, 2020 .

Dynamic Multicontrast X-Ray Imaging Method Applied to Additive Manufacturing.

J. Schulz, M. Endrizzi, S. Marussi, 2021, Physical review letters.

Synchrotron X-ray imaging of directed energy deposition additive manufacturing of titanium alloy Ti-6242

I. Todd, C. L. Leung, S. Marussi, 2021 .

Correlative Synchrotron X-Ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

C. L. Leung, S. Marussi, R. Atwood, 2020, Acta Materialia.

Preparation of large biological samples for high-resolution, hierarchical, synchrotron phase-contrast tomography with multimodal imaging compatibility

P. Tafforeau, S. Marussi, D. Jonigk, 2023, Nature Protocols.

A multiscale X-ray phase-contrast tomography dataset of a whole human left lung

P. Tafforeau, S. Verleden, S. Marussi, 2021, Scientific Data.

Synchrotron Imaging of Keyhole Mode Multi-layer Laser 1 Powder Bed Fusion Additive Manufacturing

E. Boller, A. Rack, I. Todd, 2020 .

Thermoelectric Magnetohydrodynamic Control of Melt Pool Flow During Laser Directed Energy Deposition Additive Manufacturing

C. L. Leung, S. Marussi, R. Atwood, 2023, SSRN Electronic Journal.

In Situ X-Ray Imaging of Hot Cracking and Porosity During Lpbf of Al-2139 with Tib2 Additions and Varied Process Parameters

M. Easton, M. Brandt, C. L. Leung, 2023, SSRN Electronic Journal.

In situ Correlative Observation of Humping-Induced Cracking in Directed Energy Deposition of Nickel-Based Superalloys

C. L. Leung, S. Marussi, R. Atwood, 2023, Additive Manufacturing.

An in situ imaging investigation of the effect of gas flow rates on directed energy deposition

S. Marussi, Chu Lun Alex Leung, M. Jones, 2024, Materials & Design.

Direct observation of degassing during decompression of basaltic magma

J. Hazemann, S. Marussi, R. Wogelius, 2024, Science advances.