P. Krakhmalev

发表

Microstructure, Solidification Texture, and Thermal Stability of 316 L Stainless Steel Manufactured by Laser Powder Bed Fusion

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2018, Metals.

Hierarchical design principles of selective laser melting for high quality metallic objects

Pavel Krakhmalev, Igor Yadroitsev, Ina Yadroitsava, 2015 .

Influence of heat treatment under hot isostatic pressing (HIP) on microstructure of intermetallic-reinforced tool steel manufactured by laser powder bed fusion

P. Krakhmalev, G. Fredriksson, M. Thuvander, 2020 .

Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel

W. Fredriksson, Gunnel Fredriksson, Pavel Krakhmalev, 2019, Materials Science and Engineering: A.

Surface integrity factors influencing fatigue crack nucleation of laser powder bed fusion Ti6Al4V alloy

P. Krakhmalev, G. Fredriksson, F. Cabanettes, 2020 .

Qualification of Ti6Al4V ELI Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications

Pavel Krakhmalev, Igor Yadroitsev, Ina Yadroitsava, 2018 .

Thermally activated relaxation behaviour of shot-peened tool steels for cutting tool body applications

P. Krakhmalev, A. Medvedeva, J. Bergström, 2011 .

Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2014 .

Experimental study of the relationship between temperature and adhesive forces for low-alloyed steel, stainless steel, and titanium using atomic force microscopy in ultrahigh vacuum

P. Krakhmalev, J. Bergström, A. Gåård, 2008 .

Influence of nickel content on machinability of a hot-work tool steel in prehardened condition

P. Krakhmalev, A. Medvedeva, J. Bergström, 2011 .

Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2013 .

Effect of microstructure on edge wear mechanisms in WC-Co, WOM 2007

P. Krakhmalev, 2007 .

Evaluation of post-treatments of novel hot-work tool steel manufactured by laser powder bed fusion for aluminum die casting applications

P. Krakhmalev, C. Oikonomou, S. Hatami, 2021 .

Microstructural characterization and wear behavior of (Fe,Ni)–TiC MMC prepared by DMLS

Anders Gåård, Jens Bergström, Pavel Krakhmalev, 2006 .

How hardmetals react to wear : Nano is not always the best

P. Krakhmalev, J. Sukumaran, A. Gåård, 2007 .

Sliding wear and fatigue cracking damage mechanisms in reciprocal and unidirectional sliding of high-strength steels in dry contact

P. Krakhmalev, J. Bergström, Abdulbaset Mussa, 2020 .

Influence of microstructure on the abrasive edge wear of WC–Co hardmetals

P. Krakhmalev, J. Bergström, Adeva Rodil, 2007 .

Galling resistance evaluation of tool steels by two different laboratory test methods for sheet metal forming

P. Krakhmalev, M. Olsson, J. Bergström, 2012 .

Galling resistance and wear mechanisms for cold-work tool steels in lubricated sliding against high strength stainless steel sheets

P. Krakhmalev, J. Bergström, A. Gåård, 2012 .

Development of a New PM Tool Steel for Optimization of Cold Working of Advanced High-Strength Steels

P. Krakhmalev, J. Bergström, A. Şelte, 2020 .

Influence of work material proof stress and tool steel microstructure on galling initiation and critical contact pressure

P. Krakhmalev, J. Bergström, A. Gåård, 2013 .

The effect of grinding and polishing procedure of tool steels in sheet metal forming

N. Bay, P. Krakhmalev, J. Bergström, 2010 .

Preparation of Mo(Si,Al)2-ZrO2 nanocomposite powders by mechanical alloying, International Journal of Refractory Metals and Hard Materials, Volume 22, Issues 4-5, July-September 2004, Pages 205-209

P. Krakhmalev, 2004 .

Oxygen and nitrogen concentrations in the Ti-6Al-4V alloy manufactured by direct metal laser sintering (DMLS) process

I. Yadroitsev, P. Krakhmalev, T. Kurennykh, 2017 .

In Vitro Characterization of In Situ Alloyed Ti6Al4V(ELI)-3 at.% Cu Obtained by Laser Powder Bed Fusion

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2021, Materials.

Deformation Behavior and Microstructure of Ti6Al4V Manufactured by SLM

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2016 .

Tool microstructure impact on the wear behavior of ferrite iron during nanoscratching: An atomic level simulation

L. J. Holleboom, P. Krakhmalev, J. Bergström, 2017 .

In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels

Gunnel Fredriksson, Pavel Krakhmalev, Igor Yadroitsev, 2015 .

Structural effect of low Al content in the in-situ additive manufactured CrFeCoNiAlx high-entropy alloy

P. Krakhmalev, S. Evlashin, I. Shishkovsky, 2021 .

Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures

I. Yadroitsev, P. Krakhmalev, 2014 .

Processing, microstructure and properties of C40 Mo(Si,Al)2/Al2O3 composites

E. Ström, P. Krakhmalev, M. Sundberg, 2003 .

Microstructure, hardness and indentation toughness of C40 Mo(Si,Al)2/ZrO2 composites prepared by SPS of MA powders

E. Ström, P. Krakhmalev, M. Sundberg, 2003 .

Microstructure and properties stability of Al-alloyed MoSi2 matrix composites

E. Ström, P. Krakhmalev, Chang-hai Li, 2004 .

Tribological behavior and wear mechanisms of MoSi2-base composites sliding against AA6063 alloy at elevated temperature, Wear, Volume 260, Issues 4-5, 24 February 2006, Pages 450-457

P. Krakhmalev, J. Bergström, 2006 .

MICROSTRUCTURAL AND THERMAL STABILITY OF SELECTIVE LASER MELTED 316L STAINLESS STEEL SINGLE TRACKS

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2017 .

Microstructure, hardness and indentation toughness of high-temperature C40 Mo(Si,Al)2/SiC composites prepared by SPS of MA powders, Materials Letters, Volume 57, Issues 22-23, July 2003, Pages 3387-3391

E. Ström, P. Krakhmalev, M. Sundberg, 2003 .

Influence of tool steel microstructure on origin of galling initiation and wear mechanisms under dry sliding against a carbon steel sheet

P. Krakhmalev, J. Bergström, A. Gåård, 2009 .

OPTIMAL PROCESS PARAMETERS FOR IN SITU ALLOYED Ti15Mo STRUCTURES BY LASER POWDER BED FUSION

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2017 .

Temperature effects on adhesive wear in dry sliding contacts

Anders Gåård, Jens Bergström, Nils Hallbäck, 2010 .

Atomistic Insights on the Wear/Friction Behavior of Nanocrystalline Ferrite During Nanoscratching as Revealed by Molecular Dynamics

P. Krakhmalev, J. Bergström, A. Gåård, 2017, Tribology Letters.

Wear mechanisms and wear resistance of austempered ductile iron in reciprocal sliding contact

P. Krakhmalev, J. Bergström, A. Mussa, 2022, Wear.

Automated and Systematic Digital Twins Testing for Industrial Processes

Bestoun S. Ahmed, A. Kassler, P. Krakhmalev, 2023, ArXiv.

Structural integrity I

N. Takata, P. Krakhmalev, A. M. Vilardell, 2021 .

Laser Additive 3D Printing of Titanium Alloys: Current Status, Problems, Trends

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2021, Physics of Metals and Metallography.

Texture and Twinning in Selective Laser Melting Ti-6Al-4V Alloys

I. Yadroitsev, P. Krakhmalev, T. Kurennykh, 2017 .

Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D Printing

I. Yadroitsev, P. Krakhmalev, M. Thuvander, 2018, Materials Characterization.

On the Abrasion of Ultrafine WC–Co Hardmetals by Small SiC Abrasive

P. Krakhmalev, 2008 .

Influence of surface topography on fatigue behavior of Ti6Al4V alloy by laser powder bed fusion

P. Krakhmalev, F. Cabanettes, P. Bertrand, 2018 .

Topology optimization and characterization of Ti6Al4V ELI cellular lattice structures by laser powder bed fusion for biomedical applications

I. Yadroitsava, I. Yadroitsava, I. Yadroitsev, 2019, Materials Science and Engineering: A.

Processing, microstructure and properties of C40 Mo(Si,Al)2/Al2O3 composites, Materials Science and Engineering A, Volume 360, Issues 1-2, Pages 207-213, 2003

E. Ström, P. Krakhmalev, M. Sundberg, 2003 .

Process quality assessment with imaging and acoustic monitoring during Laser Powder Bed Fusion

P. Krakhmalev, I. Zhirnov, M. Åsberg, 2022, Procedia CIRP.

Effect of preheating temperature on the porosity and microstructure of martensitic hot work tool steel manufactured with L-PBF

P. Krakhmalev, C. Oikonomou, N. Panahi, 2022, Procedia CIRP.

Mechanical behavior of in-situ alloyed Ti6Al4V(ELI)-3 at.% Cu lattice structures manufactured by laser powder bed fusion and designed for implant applications.

A. du Plessis, I. Yadroitsava, I. Yadroitsev, 2020, Journal of the mechanical behavior of biomedical materials.

Systematic exploration of the L-PBF processing behavior and resulting properties of β-stabilized Ti-alloys prepared by in-situ alloy formation

M. Merklein, P. Krakhmalev, F. Huber, 2021 .

Failure analyses and wear mechanisms of rock drill rods, a case study

P. Krakhmalev, J. Bergström, Abdulbaset Mussa, 2019, Engineering Failure Analysis.

Tensile properties and microstructure of direct metal laser-sintered TI6AL4V (ELI) alloy

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2016 .

Micromechanisms of Deformation and Fracture in Porous L-PBF 316L Stainless Steel at Different Strain Rates

P. Krakhmalev, M. Karabanalov, O. Koemets, 2021, Metals.

Manufacturing and characterization of in-situ alloyed Ti6Al4V(ELI)-3 at.% Cu by laser powder bed fusion

I. Yadroitsava, I. Yadroitsev, N. Takata, 2020 .

Microstructure of L-PBF alloys

P. Krakhmalev, N. Kazantseva, 2021 .

Additively manufactured metals for medical applications

Jean-Pierre Kruth, Jan Van Humbeeck, Sasan Dadbakhsh, 2018 .

Mechanical behavior of carbon nanotubes in the rippled and buckled phase

P. Krakhmalev, K. Svensson, H. Jackman, 2015 .

Measurements of the critical strain for rippling in carbon nanotubes

P. Krakhmalev, K. Svensson, H. Jackman, 2011 .

Large variations in the onset of rippling in concentric nanotubes

P. Krakhmalev, K. Svensson, H. Jackman, 2014 .

Galling resistance and wear mechanisms – cold work tool materials sliding against carbon steel sheets

P. Krakhmalev, J. Bergström, A. Gåård, 2007 .

Manufacturing of intermetallic Mn-46%Al by laser powder bed fusion

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2018 .

Fracture mechanisms in the as-built and stress-relieved laser powder bed fusion Ti6Al4V ELI alloy

I. Yadroitsev, P. Krakhmalev, A. M. Vilardell, 2019, Optics & Laser Technology.

Titanium Alloys Manufactured by In Situ Alloying During Laser Powder Bed Fusion

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2017 .

VALIDATION OF MINIATURISED TENSILE TESTING ON DMLS TI6AL4V (ELI) SPECIMENS

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2016 .

Image formation mechanisms in scanning electron microscopy of carbon nanotubes, and retrieval of their intrinsic dimensions.

P. Krakhmalev, K. Svensson, H. Jackman, 2013, Ultramicroscopy.

Development of a novel Wear-resistant WC-reinforced Coating based on the Case-Hardening Steel Bainidur AM for the Substitution of Carburizing Heat Treatments

P. Krakhmalev, M. Fallqvist, Dominic Bartels, 2023, Journal of Materials Research and Technology.

Isothermal grain growth in mechanically alloyed nanostructured Fe80Ti8B12 alloy

L. Nyborg, P. Krakhmalev, D. Yi, 2003 .

Influence of the in-situ heat treatment during manufacturing on the microstructure and properties of DED-LB/M manufactured maraging tool steel

P. Krakhmalev, O. Hentschel, A. Şelte, 2023, Journal of Materials Processing Technology.

Wear mechanisms in deep drawing of carbon steel – correlation to laboratory testing

P. Krakhmalev, J. Bergström, A. Gåård, 2008 .

Wear Mechanisms in Galling: Cold Work Tool Materials Sliding Against High-strength Carbon Steel Sheets

P. Krakhmalev, J. Bergström, A. Gåård, 2009 .

Manufacturing, microstructure and mechanical properties of selective laser melted Ti6Al4V-Cu

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2017 .

Functionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2017, Materials.

Adhesion between ferrite iron–iron/cementite countersurfaces: A molecular dynamics study

L. J. Holleboom, P. Krakhmalev, J. Bergström, 2016 .

Preparation of nanocrystalline/amorphous structure in soft magnetic Fe-based alloys by mechanical alloying, 22nd Risoe International Symposium on Materials Science

L. Nyborg, P. Krakhmalev, D. Yi, 2001 .

Effect of Heat Treatment on Osteoblast Performance and Bactericidal Behavior of Ti6Al4V(ELI)-3at.%Cu Fabricated by Laser Powder Bed Fusion

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2023, Journal of Functional Biomaterials.