D. Grzesiak

发表

Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites

Dariusz Grzesiak, Jenn‐Ming Yang, B. Almangour, 2017 .

Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting

Jenn‐Ming Yang, B. Almangour, D. Grzesiak, 2016 .

Effect of processing parameters on the microstructure and mechanical properties of Co–Cr–Mo alloy fabricated by selective laser melting

B. Almangour, D. Grzesiak, Monis Luqman, 2020 .

Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel

M. Pellizzari, M. Benedetti, F. Deirmina, 2020 .

H13–partially stabilized zirconia nanocomposites fabricated by high-energy mechanical milling and selective laser melting

M. Pellizzari, F. Deirmina, B. Almangour, 2018 .

Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing

B. Almangour, D. Grzesiak, Young-kyun Kim, 2019, Composites Part B: Engineering.

Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing

M. Pellizzari, F. Deirmina, B. Almangour, 2019, Materials Science and Engineering: A.

Fracture Toughness of a Hot Work Tool Steel Fabricated by Laser‐Powder Bed Fusion Additive Manufacturing

M. Pellizzari, F. Deirmina, B. Almangour, 2019, steel research international.

Selective laser melting of TiB2/H13 steel nanocomposites: Influence of hot isostatic pressing post-treatment

Dariusz Grzesiak, Jenn‐Ming Yang, B. Almangour, 2017 .

Topology Optimisation Aimed at Additive—SLM Manufacturing of Metal Parts of ExoArm 7-DOF

D. Grzesiak, P. Herbin, M. Królikowski, 2018 .

Technological Restrictions of Lightweight Lattice Structures Manufactured by Selective Laser Melting of Metals

D. Grzesiak, M. Królikowski, 2014 .

Selective laser melting of TiB2/316L stainless steel composites: The roles of powder preparation and hot isostatic pressing post-treatment

Jenn‐Ming Yang, B. Almangour, D. Grzesiak, 2017 .

The role of the additive manufacturing process parameters in the shaping of the surface geometric structure during micro-milling

D. Grzesiak, B. Powałka, M. Matuszak, 2020 .

Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting

D. Grzesiak, T. Borkar, Taban Larimian, 2020 .

In situ formation of TiC-particle-reinforced stainless steel matrix nanocomposites during ball milling: Feedstock powder preparation for selective laser melting at various energy densities

Jenn‐Ming Yang, D. Grzesiak, B. AlMangour, 2018 .

The analysis of the influence of the content of TiC in the nanocomposite on the milled surface topography

D. Grzesiak, Sara Dudzińska, D. Grochała, 2016 .

Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting

D. Grzesiak, Kee‐Ahn Lee, M. Baek, 2018 .

Application of thermal analysis in nanotechnology

D. Grzesiak, A. Biedunkiewicz, P. Figiel, 2010 .

Application of thermal analysis in nanotechnology Carbonization and purification of nc-TiCx in argon atmosphere

D. Grzesiak, A. Biedunkiewicz, P. Figiel, 2010 .

Superior Wear Resistance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples

K. Prashanth, D. Grzesiak, Chao Yang, 2019, Materials.

Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods

D. Grzesiak, Jinquan Cheng, Y. N. Ertas, 2018, Journal of Materials Processing Technology.

Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting

Jenn‐Ming Yang, D. Grzesiak, T. Borkar, 2018 .

Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content

D. Grzesiak, B. AlMangour, Jenn-MingYang, 2016 .

In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting

Jenn‐Ming Yang, D. Grzesiak, B. AlMangour, 2017 .

IN-SITU TiC PARTICLE REINFORCED 316 L STAINLESS STEEL MATRIX NANOCOMPOSITES : POWDER PREPARATION BY MECHANICAL ALLOYING AND SELECTIVE LASER MELTING BEHAVIOUR

J. Yang, D. Grzesiak, B. AlMangour, 2016 .

Effect of milling time on thermal treatment of TiC, TiB2/steel powders

D. Grzesiak, A. Biedunkiewicz, M. Krawczyk, 2013, Journal of Thermal Analysis and Calorimetry.

A New Approach for Manufacturing Stochastic Pure Magnesium Foam by Laser Powder Bed Fusion: Fabrication, Geometrical Characteristics, and Compressive Mechanical Properties

D. Grzesiak, Kee‐Ahn Lee, Yu-Jin Hwang, 2021, Advanced Engineering Materials.

Oxidation process of the steel/nc-TiC nanocomposites

D. Grzesiak, P. Figiel, W. Biedunkiewicz, 2012, Journal of Thermal Analysis and Calorimetry.

MECHANICAL PROPERTIES OF NC-TiB2 /STEEL AND NC-TiC/STEEL COMPOSITE SYNTHESIZED BY SELECTIVE LASER MELTING

D. Grzesiak, A. Biedunkiewicz, P. Figiel, 2012 .

Microstructure and Tribocorrosion Properties of Titanium Matrix Nanocomposites Manufactured by Selective Laser Sintering/Melting Method

D. Grzesiak, A. Biedunkiewicz, M. Krawczyk, 2015 .

Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting ☆

Jenn‐Ming Yang, D. Grzesiak, B. AlMangour, 2016 .

Selective laser melting of TiC/H13 steel bulk-form nanocomposites with variations in processing parameters

Jenn‐Ming Yang, D. Grzesiak, B. AlMangour, 2017 .

Effect of Laser Spot Size, Scanning Strategy, Scanning Speed, and Laser Power on Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated via Selective Laser Melting

D. Grzesiak, T. Borkar, Taban Larimian, 2021, Journal of Materials Engineering and Performance.

A study of surface formation of the mould cavity injection influencing 3D surface texture

D. Grzesiak, Sara Dudzińska, D. Grochała, 2016 .

Effect of unit cell topology on the tensile loading responses of additive manufactured CoCrMo triply periodic minimal surface sheet lattices

D. Grzesiak, So-Yeon Park, Kee‐Ahn Lee, 2021 .

Compressive Deformation Behavior and Energy Absorption Characteristic of Additively Manufactured Sheet CoCrMo Triply Periodic Minimal Surface Lattices

D. Grzesiak, So-Yeon Park, Kee‐Ahn Lee, 2022, Journal of Materials Research and Technology.

Microstructure and mechanical properties of Co–Cr–Mo alloy fabricated by selective laser melting: Effect of hot isostatic pressing

D. Grzesiak, Monis Luqman, B. AlMangour, 2020 .

Selective laser melting of TiC reinforced stainless steel nanocomposites: Mechanical behaviour at elevated temperatures

D. Grzesiak, Kee‐Ahn Lee, M. Baek, 2019 .

Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn_(35−x)–x (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying and Selective Laser Melting

D. Grzesiak, H. Ammar, S. Sivasankaran, 2023, Metallurgical and Materials Transactions A.