I. Davies

发表

Estimation of the fracture toughness of Tyranno Si-Ti-C-O fibres from flaw size and "fracture mirror" data measured in situ a 3-D woven SiC/SiC composite

T. Ishikawa, I. Davies, 2001 .

Modeling electrospun nanofibers: An overview from theoretical, empirical, and numerical approaches

Yu Dong, I. Davies, Yu Dong, 2016 .

Tribological behavior of unsaturated polyester hybrid composites containing wood flour and carbon nanotubes

Muhammad Ekhlasur Rahman, I. Davies, Changyong Cao, 2019, SN Applied Sciences.

Modelling the effects of production rates and physico-chemical parameters on pitting rate and pit depth growth of onshore oil and gas pipelines

I. Davies, C. Ossai, B. Boswell, 2016 .

Estimation of internal pit depth growth and reliability of aged oil and gas pipelines: A Monte Carlo simulation approach

Chinedu I. Ossai, I. Davies, C. Ossai, 2015 .

Predictive Modelling of Internal Pitting Corrosion of Aged Non-Piggable Pipelines

I. Davies, C. Ossai, B. Boswell, 2015 .

Multi-objective analysis for optimal and robust design of unidirectional glass/carbon fibre reinforced hybrid epoxy composites under flexural loading

I. Davies, C. Dong, M. Kalantari, 2016 .

Flexural properties of wheat straw reinforced polyester composites

I. Davies, C. Dong, 2012 .

OF MACHINING METAL MATRIX COMPOSITES

I. Davies, B. Boswell, C. Nicholls, 2018 .

Rapid mapping and analysing rock mass discontinuities with 3D terrestrial laser scanning in the underground excavation

Ian J. Davies, I. Davies, Siwei Chen, 2018, International Journal of Rock Mechanics and Mining Sciences.

Flexural properties of glass and carbon fiber reinforced epoxy hybrid composites

Ian J. Davies, Chensong Dong, I. Davies, 2013 .

Flexural properties of hybrid composites reinforced by S-2 glass and T700S carbon fibres

I. Davies, C. Dong, Heshan A. Ranaweera-Jayawardena, 2012 .

Flexural properties of S‐2 glass and TR30S carbon fiber‐reinforced epoxy hybrid composites

I. Davies, C. Dong, John Duong, 2012 .

Flexural Properties of E Glass and TR50S Carbon Fiber Reinforced Epoxy Hybrid Composites

Sudarisman, I. Davies, C. Dong, 2012, Journal of Materials Engineering and Performance.

Multi-objective robust optimisation of unidirectional carbon/glass fibre reinforced hybrid composites under flexural loading

Mehdi Kalantari, Chensong Dong, I. Davies, 2016 .

Flexural and tensile moduli of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres

I. Davies, C. Dong, 2014 .

Flexural and tensile strengths of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres

I. Davies, C. Dong, 2014 .

Multi-objective robust optimization of multi-directional carbon/glass fibre-reinforced hybrid composites with manufacture related uncertainties under flexural loading

Mehdi Kalantari, Ian J. Davies, Chensong Dong, 2017 .

Flexural properties of a hybrid polymer matrix composite containing carbon and silicon carbide fibres

I. Davies, H. Hamada, 2001 .

Flexural strength of bidirectional hybrid epoxy composites reinforced by E glass and T700S carbon fibres

I. Davies, C. Dong, 2015 .

Robustness for unidirectional carbon/glass fibre reinforced hybrid epoxy composites under flexural loading

I. Davies, C. Dong, M. Kalantari, 2015 .

Mechanical properties in compression of low density carbon/carbon composites

R. Rawlings, I. Davies, 1994 .

Unbiased estimation of the Weibull scale parameter using linear least squares analysis

I. Davies, 2017 .

Mechanical properties of Macadamia nutshell powder and PLA bio-composites

I. Davies, R. Scaffaro, C. Dong, 2017 .

Effect of Fluoride and Oxide Additives on the Phase Transformations in Alumina/Clay Ceramics

I. Davies, I. Low, B. Latella, 2009 .

Effect of oil palm shell powder on the mechanical performance and thermal stability of polyester composites

Muhammad Ekhlasur Rahman, D. Sujan, I. Davies, 2015 .

Identification of preferred combination of factors in manufacturing bioepoxy/clay nanocomposites

I. Davies, A. Pramanik, Yu Dong, 2018, Advanced Composite Materials.

Microprobe fluorescence spectroscopy evaluation of stress fields developed along a propagating crack in an Al_2O_3/CaO 6Al_2O_3ceramic composite

O. Sbaizero, I. Davies, S. Maschio, 2001 .

Influence of Oxidation on the Micro‐Mechanical Properties of a 3‐D Woven SiC/SiC Composite Tested in Air at 1100 °C

T. Ishikawa, I. Davies, T. Ogasawara, 2011 .

Distribution of fibre pullout length and interface shear strength within a single fibre bundle for an orthogonal 3-D woven Si–Ti–C–O fibre/Si–Ti–C–O matrix composite tested at 1100 °C in air

T. Ishikawa, I. Davies, T. Ogasawara, 2005 .

MICROSTRUCTURES OF SPHERICAL CALCIUM-PHOSPHATE AGGLOMERATES PREPARED BY SPRAY-PYROLYSIS AND FREEZE-DRYING TECHNIQUES

I. Davies, K. Itatani, Y. Musha, 2006 .

Multiple Cracking and Tensile Behavior for an Orthogonal 3‐D Woven Si‐Ti‐C‐O Fiber/Si‐Ti‐C‐O Matrix Composite

T. Ishikawa, Hiroshi Ito, N. Watanabe, 2004 .

Effect of chopped Si–Al–C fiber addition on the mechanical properties of silicon carbide composite

I. Davies, S. Koda, K. Itatani, 2006 .

Fabrication and fracture behaviour of silicon carbide composites containing chopped Tyranno ® Si-Al-C fibre

T. Tanaka, H. Suemasu, I. Davies, 2005 .

Case study of failure in a glass-sealed SiC/SiC-based composite creep tested at 1100°C in air

T. Ishikawa, I. Davies, T. Ogasawara, 2001 .

Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs)

Muhammad Ekhlasur Rahman, D. Sujan, I. Davies, 2018, Applied Composite Materials.

Contribution of machining to the fatigue behaviour of metal matrix composites (MMCs) of varying reinforcement size

I. Davies, S. Chattopadhyaya, A. Pramanik, 2017 .

PVA, PVA Blends, and Their Nanocomposites for Biodegradable Packaging Application

I. Davies, Yu Dong, S. Barbhuiya, 2017 .

Multi-objective particle swarm optimisation of multilayer functionally graded coating systems for improved interfacial delamination resistance

I. Davies, C. Dong, S. Abedini, 2020 .

The effects of material formulation and manufacturing process on mechanical and thermal properties of epoxy/clay nanocomposites

I. Davies, A. Pramanik, Yu Dong, 2016 .

Formation of silicon carbide layer on the vapor-grown carbon nanofiber® by sol-gel and carbothermal reduction techniques

I. Davies, S. Koda, K. Itatani, 2011 .

Fabrication of silicon carbide composites with carbon nanofiber addition and their fracture toughness

H. Suemasu, I. Davies, S. Koda, 2010 .

Confidence limits for Weibull parameters estimated using linear least squares analysis

I. Davies, 2017 .

Compressive failure of unidirectional hybrid fibre-reinforced epoxy composites containing carbon and silicon carbide fibres

Sudarisman, H. Hamada, I. Davies, 2007 .

Tensile and in Situ Fibre Properties of 3‐D SiC/SiC‐Based Composite Tested at Elevated Temperature in Vacuum and Air with and Without an Oxidation Protection System

T. Ishikawa, I. Davies, J. Gotoh, 2008 .

Influence of flaw distribution on single fibre fragmentation

I. Davies, Denis C. Rollin, 2011 .

Fabrication and Properties of Recycled Cellulose Fibre-Reinforced Epoxy Composites

I. Davies, I. Low, B. Latella, 2009 .

Eco-friendly polyvinyl alcohol (PVA)/bamboo charcoal (BC) nanocomposites with superior mechanical and thermal properties

I. Davies, Yu Dong, M. Mousa, 2018 .

The effects of material formulation and manufacturing process on mechanical and thermal properties of epoxy/clay nanocomposites

I. Davies, Yu Dong, A. Pramanik, 2016, The International Journal of Advanced Manufacturing Technology.

Effect of filler load on the curing behavior and mechanical and thermal performance of wood flour filled thermoset composites

D. Sujan, I. Davies, O. Nabinejad, 2017 .

Sinterability of magnesium silicon nitride powder with yttrium oxide addition coated using the homogeneous precipitation method

H. Kuwano, I. Davies, K. Itatani, 2002 .

Pipeline failures in corrosive environments – A conceptual analysis of trends and effects

Brian Boswell, Chinedu I. Ossai, Ian J. Davies, 2015 .

Methods for accurate high-temperature Sieverts-type hydrogen measurements of metal hydrides

I. Davies, M. Paskevicius, D. Sheppard, 2019, Journal of Alloys and Compounds.

Preparation of submicrometer-sized porous spherical hydroxyapatite agglomerates by ultrasonic spray pyrolysis technique

I. Davies, S. Koda, K. Itatani, 2010 .

The effect of rare-earth oxide addition on the hot-pressing of magnesium silicon nitride

H. Suemasu, I. Davies, H. Uchida, 2002 .

Review of machining metal matrix composites

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2017 .

Review of machining metal matrix composites

I. Davies, B. Boswell, Carl J. Nicholls, 2016, The International Journal of Advanced Manufacturing Technology.

Effect of colloidal silica addition on the formation of porous spherical α-calcium orthophosphate agglomerates by spray pyrolysis technique

I. Davies, S. Koda, K. Itatani, 2009 .

Microstructural investigation of low-density carbon-carbon composites

R. Rawlings, I. Davies, 1994 .

Mechanical properties in flexure and tension of low density carbon-carbon composites

R. Rawlings, I. Davies, 1994 .

Mechanical Behaviour of Nickel Aluminide Reinforced Alumina (AL2O3-NiAl) Composites

I. Davies, D. Sciti, G. Pezzotti, 2002 .

Superplastic deformation of hydroxyapatite ceramics with B2O3 or Na2O addition fabricated by pulse current pressure sintering

Y. Sakka, I. Davies, S. Koda, 2011 .

Fabrication of Highly-Densified Hydroxyapatite Ceramic with Boron Oxide Addition and Its Superplastic Deformation

Y. Sakka, I. Davies, S. Koda, 2011 .

Fabrication of dense β-calcium orthophosphate with submicrometer-sized grains and its high-temperature superplastic deformation

Y. Sakka, I. Davies, K. Nishio, 2011 .

Erratum: FABRICATION OF FLUORAPATITE CERAMIC MATERIAL WITH SUBMICRO -45- METER-SIZED GRAINS AND ITS HIGH-TEMPERATURE PLASTIC DEFORMATION [Phosphorus Research Bulletin 23, 45-51 (2009)]

Y. Sakka, I. Davies, S. Koda, 2009 .

FABRICATION OF FLUORAPATITE CERAMIC MATERIAL WITH SUBMICROME -45- TER-SIZED GRAINS AND ITS HIGH-TEMPERATURE PLASTIC DEFORMATION

Y. Sakka, I. Davies, S. Koda, 2009 .

Fracture toughness enhancement of silicon carbide composites with hydrophilic-modified Tyranno® Si–Al–C fibre addition

I. Davies, K. Itatani, Hiroki Moriyasu, 2017 .

Effect of Surface-Modified Si-Al-C® Fibre Addition on the Mechanical Properties of Silicon Carbide Composite

H. Suemasu, I. Davies, S. Koda, 2010 .

Influence of Acid Treatment on the Characteristics of Si-Al-C Fibre with Carbon Interface

H. Suemasu, I. Davies, S. Koda, 2010 .

Fibre and interfacial properties measured in situ for a 3D woven SiC/SiC-based composite with glass sealant

T. Ishikawa, I. Davies, J. Gotoh, 1999 .

Optical microscopy of a 3-D woven SiC/SiC-based composite

T. Ishikawa, I. Davies, M. Shibuya, 1999 .

Mechanical properties in compression of CVI-densified porous carbon/carbon composite

R. Rawlings, I. Davies, 1999 .

Scanning electron microscopy study of failure in glass-sealed SiC/SiC-based composite (NUSK-CMC) creep tested at 1100 and 1200°C in air

T. Ishikawa, I. Davies, T. Ogasawara, 2001 .

PHYSICAL PROPERTIES OF HOT PRESSED MAGNESIUM SILICON NITRIDE COMPACTS WITHYTTRIUM OXIDE ADDITION

I. Davies, H. Suematsu, K. Itatani, 1999 .

PHYSICAL AND MECHANICAL PROPERTIES OF SINTERED MAGNESIUM SILICON NITRIDE COMPACTS WITH YTTRIUM OXIDE ADDITION

I. Davies, H. Uchida, K. Itatani, 1999 .

Densification and microstructural developments during the sintering of aluminium silicon carbide

H. Suemasu, I. Davies, K. Itatani, 2002 .

Mechanical and thermal properties of silicon-carbide composites fabricated with short Tyranno® Si-Zr-C-O fibre

H. Suemasu, I. Davies, K. Itatani, 2001 .

Effect of machining parameters on the surface finish of a metal matrix composite under dry cutting conditions

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2017 .

PREPARATION OF POROUS SPHERICAL HYDROXYAPATITE AGGLOMERATES INTERACTED WITH CYCLODEXTRIN

I. Davies, S. Koda, T. Hayashita, 2010 .

Comparison of fibre/matrix interface strength for a 3D woven SiC/SiC composite

T. Ishikawa, I. Davies, 2000 .

Determination of filler content for natural filler polymer composite by thermogravimetric analysis

D. Sujan, I. Davies, M. Rahman, 2015, Journal of Thermal Analysis and Calorimetry.

Recent progress in electrospun nanofibers: Reinforcement effect and mechanical performance

I. Davies, Yu Dong, S. Mohammadzadehmoghadam, 2015 .

Recent advances in bionanocomposites: Preparation, properties, and applications

I. Davies, Yu Dong, M. Mousa, 2016 .

Mechanisms and control of edge interfacial delamination in a multilayer system containing a functionally graded interlayer

I. Davies, C. Dong, S. Abedini, 2020 .

Finite element analysis of edge crack delamination and optimisation of functionally graded interlayer for coated stainless steel in hydrogen storage applications

I. Davies, C. Dong, S. Abedini, 2019, Surface and Coatings Technology.

Effect of stacking sequence on the flexural properties of carbon and glass fibre-reinforced hybrid composites

I. Davies, C. Dong, 2018, Advanced Composites and Hybrid Materials.

Flexural Properties of Macadamia Nutshell Particle Reinforced Polyester Composites

I. Davies, C. Dong, 2012 .

Influence of Alkali Treatment and Nanoclay Content on the Properties of Rice Husk Filled Polyester Composites

I. Davies, W. Liew, S. Debnath, 2017 .

Optimal design for the flexural behaviour of glass and carbon fibre reinforced polymer hybrid composites

I. Davies, C. Dong, 2012 .

Direct comparison between monofilament and multifilament tow testing for evaluating the tensile strength distribution of SiC fibers

J. Lamon, I. Davies, T. Ogasawara, 2021, Journal of the European Ceramic Society.

Tensile strength of pine needles and their feasibility as reinforcement in composite materials

I. Davies, C. Dong, D. Parsons, 2014, Journal of Materials Science.

Optimization of material formulation and processing parameters in relation to mechanical properties of bioepoxy/clay nanocomposites using Taguchi design of experiments

I. Davies, A. Pramanik, Yu Dong, 2018 .

Development of bio-based polymer/clay nanocomposites: A critical review

I. Davies, Yu Dong, H. Salam, 2015 .

Mechanical and thermal characterization of polyester composite containing treated wood flour from Palm oil biomass

D. Sujan, I. Davies, W. Liew, 2018 .

Thermal properties of silicon carbide composites fabricated with chopped Tyranno® SiAlC fibres

I. Davies, K. Itatani, Tsuyoshi Tanaka, 2006 .

Influence of Geometrical Irregularities on the Creep Behaviour of Ceramic Fibres

I. Davies, R. D. Entwistle, 2011 .

Effect of variable radius on the initial creep rate of ceramic fibres

I. Davies, 2005 .

Effect of radius variation on the mean strength of brittle fibers

I. Davies, 2001 .

Bundle to bundle variation of mean fiber radius for Tyranno® LoxM Si-Ti-C-O fibers

I. Davies, T. Ishikawa, 2001 .

INFLUENCE OF RADIUS VARIATION ON THE DRY BUNDLE STRENGTH OF BRITTLE FIBRES

I. Davies, 2007 .

Tensile creep behavior of 3-D woven Si-Ti-C-O fiber/SiC-based matrix composite with glass sealant

T. Ishikawa, I. Davies, T. Ogasawara, 2000 .

Fibre strength parameters measured in situ for ceramic-matrix composites tested at elevated temperature in vacuum and in air

T. Ishikawa, I. Davies, M. Shibuya, 1999 .

Effect of matrix voids, fibre misalignment and thickness variation on multi-objective robust optimization of carbon/glass fibre-reinforced hybrid composites under flexural loading

Mehdi Kalantari, Chensong Dong, I. Davies, 2017 .

Mirror Constant for Tyranno® Silicon-Titanium-Carbon-Oxygen Fibers Measured in Situ in a Three-Dimensional Woven Silicon Carbide/Silicon Carbide Composite

T. Ishikawa, I. Davies, 2004 .

Comparison between predicted and experimental stress/strain behavior for a 3-D woven SiC/SiC composite tested between room temperature and 1300 °C

I. Davies, T. Ishikawa, 2002 .

A review of micro-mechanical cutting

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2018 .

A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2017 .

A review of micro-mechanical cutting

I. Davies, B. Boswell, M. N. Islam, 2017, The International Journal of Advanced Manufacturing Technology.

A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining

M.N. Islam, I. Davies, B. Boswell, 2017, The International Journal of Advanced Manufacturing Technology.

Tribological behavior of unsaturated polyester hybrid composites containing wood flour and carbon nanotubes

I. Davies, Changyong Cao, W. Liew, 2019, SN Applied Sciences.

IOP Conference Series: Materials Science and Engineering

Yoshio Sakka, Pratikso, Keiichi Itatani, 2022, IOP Conference Series: Materials Science and Engineering.

Influence of Compressive Pressure, Vacuum Pressure, and Holding Temperature Applied during Autoclave Curing on the Microstructure of Unidirectional CFRP Composites

Sudarisman, I. Davies, 2008 .

THE EFFECT OF PARTIAL SUBSTITUTION OF E-GLASS FIBRE FOR CARBON FIBRE ON THE MECHANICAL PROPERTIES OF CFRP COMPOSITES

I. Davies, Sudarisman Sudarisman, Bradley De San Miguel, 2009 .

The effect of processing parameters on the flexural properties of unidirectional carbon fibre-reinforced polymer (CFRP) composites

Sudarisman, I. Davies, 2008 .

Best estimate of Weibull modulus obtained using linear least squares analysis: An improved empirical correction factor

Ian J. Davies, I. Davies, 2004 .

Processing of a porous titanium alloy from elemental powders using a solid state isothermal foaming technique

I. Davies, A. W. Nugroho, G. Leadbeater, 2010, Journal of materials science. Materials in medicine.

A Markovian approach for modelling the effects of maintenance on downtime and failure risk of wind turbine components

Brian Boswell, Chinedu I. Ossai, Ian J. Davies, 2016 .

Numerical investigation of the hybridisation mechanism in fibre reinforced hybrid composites subjected to flexural load

I. Davies, C. Dong, M. Kalantari, 2016 .

FAILURE MECHANISM OF UNIDIRECTIONAL HYBRID FRP COMPOSITES CONTAINING CARBON AND E-GLASS FIBRES SUBJECTED TO THREE-POINT BEND LOADING

I. Davies, Sudarisman Sudarisman, Bradley De San Miguel, 2009 .

Mapping the Microstructure–Property Relationships in Cortical Bone

I. Davies, I. Low, W. Pang, 2006 .

Markov chain modelling for time evolution of internal pitting corrosion distribution of oil and gas pipelines

Brian Boswell, Chinedu I. Ossai, Ian J. Davies, 2016 .

Fabrication and characterization of the porous titanium alloy by argon filled pore expansion technique

I. Davies, A. W. Nugroho, G. Leadbeater, 2018, IOP Conference Series: Materials Science and Engineering.

Unbiased estimation of Weibull modulus using linear least squares analysis—A systematic approach

Ian J. Davies, I. Davies, 2017 .

A Comparative Study of the Microstructure ‐Property Relationship in Human Adult and Baby Teeth

I. Davies, I. Low, N. Tezuka, 2008 .

Creep Behavior and Modeling of SiC-Based PC Ceramic Matrix Composites with Glass Sealant in High Temperature Air

T. Ishikawa, I. Davies, J. Gotoh, 1998 .

Processing and properties of porous Ti-Nb-Ta-Zr alloy for biomedical applications using the powder metallurgy route

I. Davies, A. W. Nugroho, G. Leadbeater, 2011 .

Sustainability Perspectives – A Review of Additive and Subtractive Manufacturing

I. Davies, Michele John, W. Biswas, 2023, Sustainable Manufacturing and Service Economics.

In Situ Neutron Diffraction Investigation on the Phase Transformation Sequence of Kaolinite and Halloysite to Mullite

Michael S. Prior, I. Davies, I. Low, 2006 .

Additive manufacturing of recycled plastics: a ‘techno-eco-efficiency’ assessment

I. Davies, Michele John, W. Biswas, 2023, The International Journal of Advanced Manufacturing Technology.

Stress/Strain Behavior of a 3-D Woven Composite Based on the SiC/SiC System

T. Ishikawa, I. Davies, T. Ogasawara, 2001 .

Investigating the ‘techno-eco-efficiency’ performance of pump impellers: metal 3D printing vs. CNC machining

I. Davies, Michele John, W. Biswas, 2022, The International Journal of Advanced Manufacturing Technology.

Flexural Failure of Unidirectional Hybrid Fibre-Reinforced Polymer (FRP) Composites Containing Different Grades of Glass Fibre

Sudarisman, I. Davies, 2008 .

Mechanical and Thermal Properties of Silicon Carbide Composites with Chopped Si-Al-C Fiber Addition

H. Suemasu, I. Davies, K. Itatani, 2008 .

Recent progress in electrospun nanofibers: Reinforcement effect and mechanical performance

I. Davies, Yu Dong, S. Mohammadzadehmoghadam, 2015 .

Empirical correction factor for the best estimate of Weibull modulus obtained using linear least squares analysis

Ian J. Davies, I. Davies, 2001 .

Fiber/matrix interface shear strength estimated from fiber pullout length data for Tyranno® Si-Zr-C-O fiber composites with different SiC-based matrices and interfaces

T. Ishikawa, I. Davies, T. Ogasawara, 2001 .