I. Smurov

发表

Parametric analysis of the selective laser melting process

Ph. Bertrand, Igor Smurov, Igor Yadroitsev, 2007 .

Single track formation in selective laser melting of metal powders

Andrey V. Gusarov, Igor Smurov, Igor Yadroitsev, 2010 .

Surface Morphology in Selective Laser Melting of Metal Powders

Igor Smurov, Igor Yadroitsev, I. Yadroitsev, 2011 .

Modeling the interaction of laser radiation with powder bed at selective laser melting

Andrey V. Gusarov, Igor Smurov, I. Smurov, 2010 .

Use of track/layer morphology to develop functional parts by selective laser melting

I. Yadroitsev, P. Bertrand, I. Smurov, 2013 .

Structural modifications of WC/Co nanophased and conventional powders processed by selective laser melting

A. Borbely, I. Smurov, A. Domashenkov, 2017 .

Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder

I. Yadroitsev, P. Bertrand, I. Smurov, 2007 .

Calculation of the Influence of the Injection Rate of Carriers on the Volt-Ampere Characteristics of the nc-Si/CaF2 Multilayer Structure by the Method of Parallel Calculations

I. Smurov, V. Sizyuk, G. V. Miloshevskii, 2002 .

Two-dimensional gas-dynamic model of laser ablation in an ambient gas

I. Smurov, A. Gusarov, A. Gnedovets, 2000 .

Near-surface laser–vapour coupling in nanosecond pulsed laser ablation

I. Smurov, A. Gusarov, 2003 .

Physics of Laser Materials Processing

G. G. Gladush, I. Smurov, 2011 .

Modelling of radiation transfer in low temperature nanosecond laser-induced plasma of Al vapour

V. V. Nossov, G. Flamant, I. Smurov, 2004 .

Modeling of plasma-controlled surface evaporation and condensation of Al target under pulsed laser irradiation in the nanosecond regime

V. V. Nossov, I. Smurov, V. Mazhukin, 2007 .

Simulation of nanoscale particles elaboration in laser-produced erosive flow

G. Flamant, I. Smurov, A. Gusarov, 2000 .

Heat transfer modelling and stability analysis of selective laser melting

I. Yadroitsev, P. Bertrand, I. Smurov, 2007 .

Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks

I. Yadroitsava, I. Yadroitsev, P. Bertrand, 2012 .

Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder

I. Yadroitsava, I. Yadroitsev, P. Krakhmalev, 2013 .

Gas-dynamic boundary conditions of evaporation and condensation: Numerical analysis of the Knudsen layer

I. Smurov, A. Gusarov, 2002 .

Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

B. Laget, P. Bertrand, I. Smurov, 2009 .

Peculiar features of electrical resistivity and phase structure in 3-D porous nitinol after selective laser sintering/melting process

I. Yadroitsev, I. Smurov, I. Shishkovsky, 2012 .

Optical monitoring of Nd : YAG laser cladding

M. Doubenskaia, Ph. Bertrand, P. Bertrand, 2004 .

Real-time optical pyrometer in laser machining

G. Flamant, I. Smurov, M. Ignatiev, 1994 .

Two-dimensional resolution pyrometer for real-time monitoring of temperature image in laser materials processing

G. Flamant, I. Smurov, V. Senchenko, 1997 .

Application of near infrared pyrometry for continuous Nd:YAG laser welding of stainless steel

Dominique Grevey, Ph. Bertrand, Igor Smurov, 2000 .

Pyrometric analysis of thermal processes in SLM technology

M. Doubenskaia, Igor Smurov, I. Smurov, 2010 .

Simulation of laser melting and evaporation of superconducting ceramics

D. Jeandel, C. Dupuy, I. Smurov, 1994 .

Manufacturing of fine-structured 3D porous filter elements by selective laser melting

Igor Shishkovsky, Ph. Bertrand, Igor Smurov, 2009 .

Direct laser manufacturing with coaxial powder injection: Modelling of structure of deposited layers

I. Smurov, A. Gusarov, 2007 .

Selective laser melting technology: From the single laser melted track stability to 3D parts of complex shape

Igor Smurov, Igor Yadroitsev, I. Yadroitsev, 2010 .

Measurement of Basic Geometric Characteristics of Particle Flow Between Surfacing Head and Substrate

I. Smurov, M. Doubenskaia, I. Zhirnov, 2017 .

Physics of Laser Materials Processing: Theory and Experiment

Igor Smurov, G. G. Gladush, I. Smurov, 2011 .

Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation

M. Doubenskaia, Igor Smurov, A. V. Zaitsev, 2013 .

Selective laser melting of NiTi powder

I. Smurov, M. Doubenskaia, A. Domashenkov, 2017 .

Overheated metastable states in polymer sublimation by laser radiation

G. Flamant, I. Smurov, V. Mazhukin, 1995 .

Monitoring of melting and solid state phase transformation induced by pulsed laser action on pure zirconium

G. Flamant, I. Smurov, S. Konstantinov, 1997 .

Interaction of Pulsed Laser Radiation with Materials

G. G. Gladush, I. Smurov, 2011 .

Two-dimensional numerical modelling of radiation transfer in powder beds at selective laser melting

Andrey V. Gusarov, Igor Smurov, I. Smurov, 2009 .

Detonation spraying behaviour of refractory metals: Case studies for Mo and Ta-based powders

I. Smurov, N. Bulina, A. Shtertser, 2018, Advanced Powder Technology.

Wear-Resistant Coatings with Engineered Structure by Laser Cladding

P. Bertrand, I. Smurov, A. Yakovlev, 2004 .

Multimaterial laser cladding with coaxial powder injection

P. Bertrand, I. Smurov, A. Yakovlev, 2007 .

Modeling of plasma-controlled evaporation and surface condensation of Al induced by 1.06 and 0.248μm laser radiations

V. V. Nossov, I. Smurov, V. Mazhukin, 2007 .

Initial Boundary Value Problem for a Singularly Perturbed Parabolic Equation in Case of Exchange of Stability

I Smurov, Valentin F. Butuzov, V. Butuzov, 1999 .

Thermal model of nanosecond pulsed laser ablation: Analysis of energy and mass transfer

I. Smurov, A. Gusarov, 2005 .

Gas dynamics of laser ablation: Influence of ambient atmosphere

I. Smurov, A. Gusarov, A. Gnedovets, 2000 .

On the mechanism of polymer sublimation by laser radiation

I. Smurov, V. Mazhukin, C. Surry, 1994 .

Boundary conditions and evaporation front instabilities

I. N. Kartashov, I. Smurov, A. Samokhin, 2005 .

The effect of hydrogen on the electronic structure and phase stability of iron-based alloys doped with chromium and nickel

I. Smurov, A. Yaresko, V. Gavriljuk, 1998 .

Analysis of laser-induced evaporation of Al target under conditions of vapour plasma formation

V. V. Nossov, I. Smurov, V. Mazhukin, 2004 .

A model for nanoparticles synthesis by pulsed laser evaporation

I. Smurov, A. Gusarov, A. Gnedovets, 1999 .

Submicron particles synthesis by laser evaporation at low power density: a numerical analysis

I. Smurov, A. Gusarov, A. Gnedovets, 2000 .

Energy and dose characteristics of ion bombardment during pulsed laser deposition of thin films under pulsed electric field

I. Smurov, V. Nevolin, V. Fominski, 2004 .

A new combined approach to metal-ceramic implants with controllable surface topography, chemistry, blind porosity, and wettability

E. Levashov, I. Yadroitsev, I. Smurov, 2012 .

Cold spraying of in situ produced TiB2–Cu nanocomposite powders

I. Smurov, O. Lomovsky, Jae Seong Kim, 2007 .

Modeling of high power laser interaction with APS deposited FeCrTiC

I. Smurov, L. Pawłowski, 2002 .

Pulsed Surface Plasma

G. G. Gladush, I. Smurov, 2011 .

Modeling of plasma dynamics at the air-water interface: Application to laser shock processing

V. V. Nossov, I. Smurov, V. Mazhukin, 2001 .

Simulation of unsteady-state thermocapillary mass transfer for laser doping of metals

I. Smurov, A. Uglov, K. I. Taguirov, 1992 .

Selective laser sintering/melting of nitinol–hydroxyapatite composite for medical applications

I. Yadroitsev, I. Smurov, I. V. Shishkovskii, 2011 .

Application of laser assisted technologies for fabrication of functionally graded coatings and objects for the International Thermonuclear Experimental Reactor components

B. Laget, I. Yadroitsev, P. Bertrand, 2007 .

Pulsed laser modification of plasma-sprayed coatings: Experimental processing of hydroxyapatite and numerical simulation

I. Smurov, L. Pawłowski, V. Veiko, 2006 .

Metal matrix composites with ternary intermetallic inclusions fabricated by laser direct energy deposition

I. Smurov, I. Shishkovsky, F. Missemer, 2018 .

Gas-dynamic spraying of hydroxyapatite on medical instruments from titanium alloy

I. Smurov, I. Shishkovsky, D. Pervushin, 2014, Russian Journal of Non-Ferrous Metals.

Modelling of plasma particle interactions and coating growth for plasma spraying of hydroxyapatite

I. Smurov, L. Pawłowski, J. Harding, 2006 .

Study of Selective Laser Melting of intermetallic TiAl powder using integral analysis

I. Smurov, P. Petrovskiy, M. Doubenskaia, 2018, International Journal of Machine Tools and Manufacture.

Titanium base functional graded coating via 3D laser cladding

Igor Shishkovsky, Igor Smurov, I. Smurov, 2012 .

Mechanisms of Laser Processing of Metal Surfaces

G. G. Gladush, I. Smurov, 2011 .

Computer-Controlled Detonation Spraying: From Process Fundamentals Toward Advanced Applications

I. Smurov, A. Shtertser, V. Ulianitsky, 2011 .

Negative electron mobility under condition of the resonant optical excitation in gas mixtures

I. Smurov, N. Gorbunov, A. Melnikov, 2003 .

Electron mobility in mixtures of optically excited sodium vapor, molecular nitrogen and heavy inert gases

I. Smurov, N. Gorbunov, O. Krylova, 2000 .

Effect of negative electron mobility in a mixture of argon, molecular nitrogen and optically excited lithium vapours

I. Smurov, N. Gorbunov, A. Melnikov, 1999 .

Real Time Pyrometry in Laser Surface Treatment

I. Smurov, M. Ignatiev, 1996 .

Laser-Induced Breakdown of Metal Vapor

G. Flamant, I. Smurov, V. Mazhukin, 1994 .

NITRIDE AND CARBIDE COATINGS SYNTHESIS ON THE SURFACE OF REFRACTORY METALS BY LASER ACTION

I. Smurov, M. B. Ignat’ev, A. Gnedovets, 1989 .

Intermetallics Synthesis in the Fe–Al System via Layer by Layer 3D Laser Cladding

Igor Shishkovsky, Igor Smurov, Nina Kakovkina, 2013 .

Laser-induced reaction of Si powder with a steel substrate

I. Yadroitsev, I. Smurov, O. Lomovsky, 2012, Inorganic Materials.

Metal Matrix Composite Material by Direct Metal Deposition

P. Bertrand, I. Smurov, L. Thivillon, 2011 .

Carbide-reinforced metal matrix composite by direct metal deposition

P. Bertrand, I. Smurov, L. Thivillon, 2010 .

Direct Metal Deposition of Functional Graded Structures in Ti- Al System

Igor Shishkovsky, I. Smurov, I. Shishkovsky, 2012 .

Study of the laser melting of pre-deposited intermetallic TiAl powder by comprehensive optical diagnostics

I. Smurov, M. Doubenskaia, A. Domashenkov, 2017 .

Nanostructural self-organization under selective laser sintering of exothermic powder mixtures

I. Smurov, I. Shishkovsky, Y. Morozov, 2009 .

Investigation of the hardening of a titanium alloy by laser nitriding

I. Smurov, E. Kovalev, S. Sturlese, 1993 .

Theoretical and Experimental Investigation of Gas Flows, Powder Transport and Heating in Coaxial Laser Direct Metal Deposition (DMD) Process

I. Smurov, A. Zaitsev, O. Kovalev, 2011 .

Laser cladding and laser assisted direct manufacturing

Igor Smurov, I. Smurov, 2008 .

Comprehensive analysis of selective laser melting of TiAl powder

I. Smurov, P. Petrovskiy, M. Doubenskaia, 2017 .

Thermal-diffusion synthesis of thick molybdenum disulphide coatings on steel substrates

N. I. Smirnov, Y. Makarov, P. Bertrand, 2004 .

Target-vapour interaction and atomic collisions in pulsed laser ablation

I. Smurov, A. Gusarov, 2001 .

Ionization kinetics of optically excited lithium vapour under conditions of negative electron mobility

I. Smurov, I. Bray, N. Gorbunov, 2001 .

Surface alloying of metals by nanosecond laser pulses under transparent overlays

Igor Smurov, A. Smirnov, N. Martsenyuk, 2003, Other Conferences.

Influence of initial micro-porosity of target on material ejection under nanosecond laser pulses

I. Smurov, Y. Chivel’, I. Smurov, 2007 .

Innovative Intermetallic Compounds by Laser Alloying

I. Smurov, M. Ignatiev, 1996 .

Residual Stresses at Laser Surface Remelting and Additive Manufacturing

Andrey V. Gusarov, Igor Smurov, I. Smurov, 2011 .

Movement of phase boundaries of metals subjected to surface periodic energy pulses

V. Tagliaferri, I. Smurov, A. Uglov, 1991 .

Modelling of pulse-periodic energy flow action on metallic materials

V. Tagliaferri, I. Smurov, A. Uglov, 1991 .

Laser-assisted direct manufacturing of functionally graded 3D objects

Dominique Grevey, Igor Smurov, A. Iakovlev, 2003, Other Conferences.

Ion-assisted deposition of MoSx films from laser-generated plume under pulsed electric field

I. Smurov, V. Nevolin, V. Fominski, 2001 .

Theoretical study of the powder behavior of porous particles in a flame during plasma spraying

I. Smurov, L. Pawłowski, V. Hurevich, 2002 .

Direct Selective Laser Melting of Nitinol Powder

Igor Shishkovsky, Igor Yadroitsev, I. Yadroitsev, 2012 .

Influence of temperature gradient to solidification velocity ratio on the structure transformation in pulsed- and CW-laser surface treatment

G. Flamant, I. Smurov, V. Mazhukin, 1995 .

INTERACTION OF LASER RADIATION WITH MATTER: Thermocapillary motion of bubbles in a melt on exposure of porous metals to laser radiation

I. Smurov, A. Uglov, A. G. Gus'kov, 1991 .

Peculiarities of laser melting and evaporation of superconducting ceramics

G. Flamant, C. Dupuy, I. Smurov, 1994 .

INVARIANT DIFFERENCE SCHEMES FOR PARABOLIC EQUATIONS WITH TRANSFORMATIONS OF INDEPENDENT VARIABLES

I. Smurov, V. Mazhukin, P. Matus, 1999 .

OVERHEATED METASTABLE STATES IN PULSED LASER ACTION ON CERAMICS

G. Flamant, I. Smurov, V. Mazhukin, 1995 .

The influence of the electron structure of atoms shells on characteristics of optical breakdown in metal vapour

G. Flamant, I. Smurov, V. Mazhukin, 1996 .

Pyrometry in laser surface treatment

M. Doubenskaia, Ph. Bertrand, Igor Smurov, 2006 .

Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting

Andrey V. Gusarov, Ph. Bertrand, Igor Yadroitsev, 2009 .

Plasma Phenomena in Laser Processing of Materials

Igor Smurov, G. G. Gladush, I. Smurov, 2011 .

On-line temperature monitoring in selective laser sintering/melting

Yu. Chivel, Igor Smurov, I. Smurov, 2010 .

Thermocapillary convection in the shallow bath formed when a solid is melted by a concentrated energy flux

I. Smurov, A. Uglov, A. G. Gus'kov, 1988 .

Numerical investigation of gas-disperse jet flows created by coaxial nozzles during the laser direct material deposition

I. Smurov, O. Kovalev, I. Kovaleva, 2017 .

Numerical simulation of transport phenomena, formation the bead and thermal behavior in application to industrial DMD technology

I. Smurov, A. Zaitsev, O. Kovalev, 2016 .

Surface temperature evolution in pulsed laser action of millisecond range

I. Smurov, M. Doubenskaia, 2006 .

Model of Heat and Mass Transfer in Random Packing Layer of Powder Particles in Selective Laser Melting

O. B. Kovalev, I. Smurov, O. Kovalev, 2014 .

Optical breakdown in aluminum vapor induced by ultraviolet laser radiation

V. V. Nossov, M. G. Nickiforov, I. Smurov, 2003 .

Development of 3D functionally graded models by laser-assisted coaxial powder injection

A. Yakovlev, Ph. Bertrand, Igor Smurov, 2004, Fundamentals of Laser Assisted Micro- and Nanotechnologies.

Pyrometry applications in laser machining

Igor Smurov, I. Smurov, 2001, Other Conferences.

Consideration of the nonmonotonic character of the spatial distribution of laser radiation in calculating heat-treatment regimes for massive articles

A. L. Smirnov, I. Smurov, A. Uglov, 1989 .

Complex Analysis of Laser Cladding based on Comprehensive Optical Diagnostics and Numerical Simulation

I. Smurov, M. Doubenskaia, A. Zaitsev, 2012 .

Surface temperature measurements during pulsed laser action on metallic and ceramic materials

G. Flamant, I. Smurov, V. Senchenko, 1996 .

On-line thermocycles measurements in laser applications

G. Flamant, I. Smurov, M. Ignatiev, 1994 .

Determination of the True Temperature During Selective Laser Melting of Metal Powders Based on Measurements with an Infrared Camera

I. Smurov, I. Zhirnov, V. Teleshevskii, 2016 .

Properties and Mechanisms of Deep Melting of Materials by a cw Laser Beam

G. G. Gladush, I. Smurov, 2011 .

Radiation transfer in metallic powder beds used in laser processing

I. Smurov, A. Gusarov, 2010 .

Determination of the temperature and concentrations for the products of combustion of a hydrocarbon fuel on the basis of their infrared self-radiation

I. Smurov, I. Smurov, V. Senchenko, 2002 .

Photoacoustic pulses in laser-irradiated metals: Numerical simulation

G. Flamant, I. Smurov, V. Mazhukin, 1994 .

Manufacturing three-dimensional nickel titanium articles using layer-by-layer laser-melting technology

Igor Shishkovsky, I. Yadroitsev, I. Smurov, 2013 .

Calculation of heating of metals by continuous laser radiation in an oxidizing atmosphere

I. Smurov, A. Volkov, A. Uglov, 1983 .

Surface microstructure of titanium irradiated by Nd: YAG pulsed laser in presence of carbon and nitrogen

I. Smurov, S. Tosto, F. Pierdominici, 1996 .

Temperature Monitoring and Overhang Layers Problem

Yu. Chivel, I. Smurov, Y. Chivel’, 2011 .

Analysis of plasma-controlled laser evaporation of Al target in vacuum

V. I. Mazhukin, V. V. Nossov, Igor Smurov, 2004, Fundamentals of Laser Assisted Micro- and Nanotechnologies.

Modeling of radiation transfer and emission spectra in laser-induced plasma of Al vapor

V. V. Nossov, I. Smurov, V. Mazhukin, 2002 .

Modelling chemical kinetics of small clusters after nanosecond laser ablation

I. Smurov, A. Gusarov, V. Titov, 2007 .

General Problems of Propagation of Laser Radiation in Gases and Plasma and Physical Processes on the Surface of Condensed Media

G. G. Gladush, I. Smurov, 2011 .