S. Herzog

发表

Influence of hot isostatic pressing post-treatment on the microstructure and mechanical behavior of standard and super duplex stainless steel produced by laser powder bed fusion

C. Broeckmann, J. Kunz, Autchariya Boontanom, 2020 .

Tailor-made functional composite components using additive manufacturing and hot isostatic pressing

C. Broeckmann, S. Herzog, A. Kaletsch, 2021 .

Effects of Pressure on Microstructure and Residual Stresses during Hot Isostatic Pressing Post Treatment of AISI M50 Produced by Laser Powder-Bed Fusion

C. Broeckmann, S. Herzog, A. Kaletsch, 2021, Metals.

Influence of initial defect density on mechanical properties of AISI H13 hot-work tool steel produced by laser powder bed fusion and hot isostatic pressing

C. Broeckmann, J. Kunz, S. Herzog, 2021, Powder Metallurgy.

Microstructure analysis of novel LPBF-processed duplex stainless steels correlated to their mechanical and corrosion properties

C. Broeckmann, J. Kunz, S. Herzog, 2021 .

Influence of laser surface texturing on the flexural strength of Al2O3 and Si3N4

C. Broeckmann, S. Herzog, A. Kaletsch, 2022, Journal of the European Ceramic Society.

Application of Weibull theory to laser surface textured Al2O3

C. Broeckmann, S. Herzog, A. Kaletsch, 2021 .

Mechanical Properties of High‐Speed Steel AISI M50 Produced by Laser Powder Bed Fusion

C. Broeckmann, J. Schleifenbaum, J. Kunz, 2020, steel research international.

Microstructure coarsening in Ba0.5Sr0.5Co0.8Fe0.2O3-δ during reactive air brazing

C. Broeckmann, S. Herzog, A. Kaletsch, 2022, Journal of the European Ceramic Society.

Influence of Process Parameters on Porosity and Hot Cracking of AISI H13 Fabricated by Laser Powder Bed Fusion

C. Broeckmann, B. Hallstedt, S. Herzog, 2022, Powders.

Towards carbide-rich tool steels in PBF-LB/M: TiC additivation of AISI H13

C. Broeckmann, S. Herzog, A. Kaletsch, 2023, Additive Manufacturing Letters.

Influence of Preheating Temperature on Microstructure Evolution and Hardness of High‐Speed Steel AISI M50 Processed by Laser Powder Bed Fusion

C. Broeckmann, J. Schleifenbaum, J. Kunz, 2023, steel research international.

Influence of high initial porosity introduced by laser powder bed fusion on the fatigue strength of Inconel 718 after post-processing with hot isostatic pressing

C. Broeckmann, S. Herzog, A. Kaletsch, 2021, Additive Manufacturing.

Influence of Powder Bed Temperature on Microstructure and Post HeatTreatment of High Speed Steel AISI M50 Processed by Laser Powder BedFusion

C. Broeckmann, J. Schleifenbaum, J. Kunz, 2018 .

Influence of the L-PBF Process Atmosphere on the Microstructure and Tensile Properties of AISI 318LN Duplex Stainless Steel

C. Broeckmann, S. Herzog, A. Kaletsch, 2022, Journal of Manufacturing and Materials Processing.

Membrane module for pilot scale oxygen production

M. Modigell, C. Broeckmann, S. Herzog, 2019, Journal of Membrane Science.

Influence of an Increasing Alloying Content on the Microstructure of a High‐Speed Steel in the Laser‐Powder Bed Fusion Process

C. Broeckmann, J. Kunz, S. Herzog, 2021, steel research international.

Diffusion Barriers Minimizing the Strength Degradation of Reactive Air Brazed Ba0.5Sr0.5Co0.8Fe0.2O3-δ Membranes during Aging

C. Broeckmann, S. Herzog, A. Kaletsch, 2023, Membranes.

Numerical Studies of Influencing Factors on the Homogeneity of the Powder Mixture during the Powder Spreading Process of Powder Bed Fusion–Laser Beam/Metal

S. Herzog, L. Becker, Yuanbin Deng, 2024, Advanced Engineering Materials.

Field-assisted sintering of MC-Ti3SiC2 composites with adjustable thermal expansion coefficient

S. Herzog, Sofia Fries, C. Broeckmann, 2024, International Journal of Refractory Metals and Hard Materials.