N. Calta

发表

Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: A correlation between in situ pyrometry and ex situ X-ray radiography

Manyalibo J. Matthews, Gabe Guss, Nicholas P. Calta, 2020 .

Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2019, Advanced Engineering Materials.

Additively manufactured hierarchical stainless steels with high strength and ductility.

Ting Zhu, Manyalibo J. Matthews, Alex V. Hamza, 2018, Nature materials.

Pressure dependence of the laser-metal interaction under laser powder bed fusion conditions probed by in situ X-ray imaging

Aiden A. Martin, K. Fezzaa, M. Matthews, 2020 .

Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging

Manyalibo J. Matthews, Nicholas P. Calta, Aiden A. Martin, 2019, Materials Today Advances.

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Michael F Toney, Tony van Buuren, Christopher J. Tassone, 2019, Nature Communications.

In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry

Manyalibo J. Matthews, Sonny Ly, Gabe Guss, 2018, Materials & Design.

An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes.

Michael F Toney, Christopher J. Tassone, Aiden A. Martin, 2018, The Review of scientific instruments.

Concerted Rattling in CsAg5 Te3 Leading to Ultralow Thermal Conductivity and High Thermoelectric Performance.

M. Kanatzidis, C. Wolverton, C. Malliakas, 2016, Angewandte Chemie.

A laser powder bed fusion system for operando synchrotron x-ray imaging and correlative diagnostic experiments at the Stanford Synchrotron Radiation Lightsource.

Christopher J. Tassone, Aiden A. Martin, J. Weker, 2022, The Review of scientific instruments.

Synthesis, Structure, and Complex Magnetism of MIr2In8 (M = Eu, Sr).

M. Kanatzidis, N. Calta, D. Chung, 2016, Inorganic chemistry.

Quaternary aluminum silicides grown in Al flux: RE5Mn4Al(23-x)Si(x) (RE = Ho, Er, Yb) and Er44Mn55(AlSi)237.

M. Kanatzidis, N. Calta, 2013, Inorganic chemistry.

Cooling dynamics of two titanium alloys during laser powder bed fusion probed with in situ X-ray imaging and diffraction

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2020 .

Sensor Fusion of Pyrometry and Acoustic Measurements for Localized Keyhole Pore Identification in Laser Powder Bed Fusion

M. Matthews, E. Flynn, J. Forien, 2022, Journal of Materials Processing Technology.

Melt-Pool Dynamics and Microstructure of Mg Alloy WE43 under Laser Powder Bed Fusion Additive Manufacturing Conditions

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2022, Crystals.

Two-band model interpretation of the p- to n-transition in ternary tetradymite topological insulators

N. Calta, V. Dravid, T. Chasapis, 2015, 1506.05524.

Site‐Specific Contributions to the Band Inversion in a Topological Crystalline Insulator

M. Kanatzidis, N. Calta, L. Bouchard, 2015, 1506.06328.

Hf3Fe4Sn4 and Hf9Fe4−xSn10+x: Two stannide intermetallics with low-dimensional iron sublattices

M. Kanatzidis, N. Calta, 2016 .

Synthesis, Structure, and Rigid Unit Mode-like Anisotropic Thermal Expansion of BaIr2In9.

M. Kanatzidis, N. Calta, Fei Han, 2015, Inorganic chemistry.

Flux Crystal Growth of the RE2Ru3Ge5 (RE = La, Ce, Nd, Gd, Tb) Series and Their Magnetic and Metamagnetic Transitions.

M. Kanatzidis, C. Malliakas, N. Calta, 2017, Inorganic chemistry.

Hybridization Gap in the Semiconducting Compound SrIr4In2Ge4.

W. Kwok, M. Kanatzidis, N. Calta, 2016, Inorganic chemistry.

Defects-dictated tensile properties of selective laser melted Ti-6Al-4V

A. Rollett, S. Khairallah, T. Voisin, 2018, Materials & Design.

Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing

Aiden A. Martin, M. Matthews, A. Rubenchik, 2020, Science.

Detection of keyhole pore formations in laser powder-bed fusion using acoustic process monitoring measurements

M. Matthews, E. Flynn, J. Forien, 2022, Additive Manufacturing.

A mesoscopic digital twin that bridges length and time scales for control of additively manufactured metal microstructures

Aiden A. Martin, J. Fattebert, M. Matthews, 2021 .

Enhanced mechanical performance via laser induced nanostructure formation in an additively manufactured lightweight aluminum alloy

Aiden A. Martin, M. Matthews, T. Willey, 2021 .

Hybridization Gap and Dresselhaus Spin Splitting in EuIr4In2Ge4.

M. Kanatzidis, A. Freeman, N. Calta, 2015, Angewandte Chemie.

High speed hyperspectral thermal imaging of the melt pool dynamics during metal additive manufacturing

M. Matthews, S. Ly, Sheldon S. Q. Wu, 2017, 2017 Conference on Lasers and Electro-Optics (CLEO).

Four High-Temperature Ferromagnets in the Hf–Fe–Sn System

M. Kanatzidis, C. Malliakas, N. Calta, 2014 .

Temperature Measurement of Laser-Irradiated Metals Using Hyperspectral Imaging

M. Matthews, Michael F Crumb, N. Calta, 2020 .

Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2020, Scientific Reports.

Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing

Christopher J. Tassone, Andrew M. Kiss, M. Toney, 2020, Scientific Reports.

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Christopher J. Tassone, Andrew M. Kiss, M. Toney, 2019, Nature Communications.

A Denoising Autoencoder for Improved Kikuchi Pattern Quality and Indexing in Electron Backscatter Diffraction.

M. Matthews, N. Calta, M. Strantza, 2023, Ultramicroscopy.

Concerted Rattling in CsAg5 Te3 Leading to Ultralow Thermal Conductivity and High Thermoelectric Performance.

M. Kanatzidis, C. Wolverton, C. Malliakas, 2016, Angewandte Chemie.