V. Madhavan

发表

Adiabatic shear banding behavior of additively manufactured superalloy IN 625

Pavan Bhavsar, Homar Lopez-Hawa, Rajesh K. Ananda-Kumar, 2019, Procedia Manufacturing.

A novel approach to accelerate attainment of thermal steady state in coupled thermomechanical analysis of machining

V. Madhavan, A. Deshpande, Viswanathan Madhavan, 2012 .

Simulation in Machining

V. Madhavan, 2015 .

Simulation in Machining

V. Madhavan, 2014 .

Infrared measurement of the temperature at the tool–chip interface while machining Ti–6Al–4V

M. A. Donmez, J. Heigel, V. Madhavan, 2017 .

UNDERSTANDING OF FINITE ELEMENT ANALYSIS RESULTS UNDER THE FRAMEWORK OF OXLEY'S MACHINING MODEL

A. H. Adibi-Sedeh, V. Madhavan, V. Madhavan, 2005 .

Extension of Oxley’s Analysis of Machining to Use Different Material Models

A H. Adibi-Sedeh, Vis Madhavan, Behnam Bahr, 2003 .

Non-Linear Finite Element Analysis of Manufacturing Processes

V. Madhavan, R. Agarwal, V. Gandikota, 1998 .

Detecting first layer bond quality during FDM 3D printing using a discrete wavelet energy approach

Pavan Bhavsar, V. Madhavan, Wilfredo Moscoso-Kingsley, 2020, Procedia Manufacturing.

Infrared Thermography of the Chip-Tool Interface through Transparent Cutting Tools | NIST

V. Madhavan, Thejas T. Menon, Thejas Menon, 2014 .

Evaluation of Chip-Tool Interface Conditions using Transparent Tools

V. Madhavan, Harikeshavan Gomatam, 1999 .

Volumes sampled for hardness and for modulus of elasticity during nanoindentation testing

V. Madhavan, M. Kashani, Akbar Aftabi Gilvan, 2012 .

Tool rake face temperature distribution when machining Ti6Al4V and Inconel 718

Viswanathan Madhavan, Jean Carlos Garcia-Gonzalez, Wilfredo Moscoso-Kingsley, 2016 .

High-speed imaging using 3CCD camera and multi-color LED flashes

Vis Madhavan, Christian J. Kähler, Christian Cierpka, 2017 .

Machining as a Wedge Indentation

Srinivasan Chandrasekar, Thomas Farris, S. Chandrasekar, 2000 .

Investigation of the Effect of Using Different Material Models on Finiste Element Simulations of Machining | NIST

A H. Adibi-Sedeh, M Vaziri, Vasant Pednekar, 2005 .

EFFECT OF SOME MODIFICATIONS TO OXLEY'S MACHINING THEORY AND THE APPLICABILITY OF DIFFERENT MATERIAL MODELS

A. H. Adibi-Sedeh, V. Madhavan, V. Madhavan, 2002 .

Using Virtual Reality To Address Competency Gaps

Vis Madhavan, Lawrence E. Whitman, Janet M. Twomey, 2002 .

Teaching Process Design Using Virtual Reality

Vis Madhavan, Lawrence E. Whitman, Janet M. Twomey, 2002 .

Virtual reality model to aid case learning

Lawrence E. Whitman, Don E. Malzahn, Viswanathan Madhavan, 2002 .

Full-field IR measurement of subsurface grinding temperatures

Takahide Sakagami, Srinivasan Chandrasekar, Viswanathan Madhavan, 1998, Defense, Security, and Sensing.

Upper Bound Analysis of Turning Using Sharp Corner Tools

A. H. Adibi-Sedeh, V. Madhavan, V. Madhavan, 2004 .

Fiber orientation angle effects in machining of unidirectional CFRP laminated composites

Brandon M. Lane, Gary Lipczynski, Eric P. Whitenton, 2014 .

An image-splitting-optic for dual-wavelength imaging

Vis Madhavan, Ala Hijazi, V. Madhavan, 2009, International Symposium on Multispectral Image Processing and Pattern Recognition.

Comparison of Flow Stress of Aluminum Alloy 6061-T6 Obtained From Chip Pulling Orthogonal Cutting and Kolsky Bar Testing

Pavan Bhavsar, Homar Lopez-Hawa, V. Madhavan, 2020, Procedia Manufacturing.

Nonlinear Finite Element Analysis of Machining and Sheet Metal Forming

V. Madhavan, V. A. Gandikota, R. Agarwal, 2000 .

Direct Observations of the Chip-Tool Interface in the Low Speed Cutting of Pure Metals

Viswanathan Madhavan, Thomas Farris, Srinivasan Chandrasekar, 2002 .

Exploration of contact conditions in machining

Viswanathan Madhavan, Thomas Farris, Srinivasan Chandrasekar, 2001 .

A novel ultra-high speed camera for digital image processing applications

Ala Hijazi, Viswanathan Madhavan, V. Madhavan, 2008 .

FEM comparison of ball and roller bullgears

Thomas Farris, Srinivasan Chandrasekar, V. Madhavan, 1996 .

Development of a Finite Element Model to Study the Torsional Fracture Strength of an Analogue Tibia with Bicorti cal Holes

H. Lankarani, V. Madhavan, P. Wooley, 2013 .

DETERMINATION OF FORMING LIMIT CURVES USING 3D DIGITAL IMAGE CORRELATION AND IN-SITU OBSERVATION

Vis Madhavan, Ala Hijazi, V. Madhavan, 2004 .

Uncertainty of temperature measurements by infrared thermography for metal cutting applications

Brandon M. Lane, Alkan Donmez, Eric P. Whitenton, 2013 .

A calibrated dual-wavelength infrared thermometry approach with non-greybody compensation for machining temperature measurements

Ala Hijazi, V. Madhavan, Viswanathan Madhavan, 2011 .

Machining behavior of additively manufactured and cast-wrought nickel-based superalloy (IN 625)

A. Donmez, Rajesh K. Ananda-Kumar, V. Madhavan, 2018 .

Upper bound analysis of oblique cutting with nose radius tools

A H. Adibi-Sedeh, Vis Madhavan, A. H. Adibi-Sedeh, 2002 .

Rake face temperature when machining with coated cutting tools

Viswanathan Madhavan, Jean Carlos Garcia-Gonzalez, Wilfredo Moscoso-Kingsley, 2016 .

Investigation of the Transition From Plane Strain to Plane Stress in Orthogonal Metal Cutting

A H. Adibi-Sedeh, Vasant Pednekar, Vis Madhavan, 2004 .