I. Goncharov

发表

Structure and mechanical properties of austenitic 316L steel produced by selective laser melting

P. Kuznetsov, A. Zisman, S. Petrov, 2016, Russian Metallurgy (Metally).

Additive Manufacturing of Ti-48Al-2Cr-2Nb Alloy Using Gas Atomized and Mechanically Alloyed Plasma Spheroidized Powders

I. Goncharov, I. Polozov, A. Popovich, 2020, Materials.

Fabrication of the Nb–16Si Alloy Powder for Additive Technologies by Mechanical Alloying and Spheroidization in Electric-Arc Discharge Thermal Plasma

A. V. Grigoriev, I. Goncharov, V. Sufiiarov, 2018, Russian Journal of Non-Ferrous Metals.

Morphology of High-Strength Heat-Resistant Steel Powder for Machines for Additive Production from Shavings

A. V. Grigor’ev, I. Goncharov, A. Popovich, 2019, Metal Science and Heat Treatment.

Investigation of additive manufacturing from the heat-resistant steel powder produced by recycling of the machining chips

I. Goncharov, D. Masaylo, A. Popovich, 2021 .

Microstructure, densification, and mechanical properties of titanium intermetallic alloy manufactured by laser powder bed fusion additive manufacturing with high-temperature preheating using gas atomized and mechanically alloyed plasma spheroidized powders

I. Goncharov, I. Polozov, V. Sufiiarov, 2020 .

Structure and Properties of a High-Entropy Ti-Zr-Hf-Ni-Co-Cu Alloy Obtained by Mechanical Alloying and Spark Plasma Sintering

I. Goncharov, A. Popovich, A. Kim, 2021, Metallography, Microstructure, and Analysis.

Syntheisis of the ZrB2-SiC ultra-high temperature ceramic powder by plasma spheroidization

I. Goncharov, A. Popovich, A. Kim, 2020 .

The Effect of Laser Power on the Microstructure of the Nb-Si Based In Situ Composite, Fabricated by Laser Metal Deposition

I. Goncharov, D. Masaylo, A. Orlov, 2019, Key Engineering Materials.

Synthesis of Nb-based powder alloy by mechanical alloying and plasma spheroidization processes for additive manufacturing

I. Goncharov, A. Popovich, A. Kim, 2019, Materials Letters.

Microstructure and phase composition of the Nb-Si based in-situ composite from plasma spheroidized powder

I. Goncharov, A. Popovich, A. Kim, 2020 .

Effect of the Mechanical Alloying and Spark Plasma Sintering on Microstructure, Phase Composition and Chemical Elements Distribution of Nb-Si Based Composite

I. Goncharov, N. Razumov, A. Shamshurin, 2019, Key Engineering Materials.

Influence of the metal chips disintegration method on the physical and mechanical properties of metal powders obtained

I. Goncharov, A. Samukov, M. Cherkasova, 2020 .

Mechanical and microstructural characterization of WC-Co consolidated by binder jetting additive manufacturing

N. Lecis, M. Vedani, I. Goncharov, 2021 .

Structure and Properties of Ti–Zr–Ni–Co–Cu High-Entropy Alloy After Powder Bed Fusion of Powders Produced by Mechanical Alloying and Plasma Spheroidization

I. Goncharov, A. Popovich, E. Borisov, 2022, Transactions of the Indian Institute of Metals.