F. Weng

发表

Microstructure and enhanced strength of laser aided additive manufactured CoCrFeNiMn high entropy alloy

Y. Chew, G. Bi, F. L. Ng, 2019, Materials Science and Engineering: A.

Achieving grain refinement and ultrahigh yield strength in laser aided additive manufacturing of Ti−6Al−4V alloy by trace Ni addition

Y. Chew, S. Sui, Z. Du, 2021, Virtual and Physical Prototyping.

Research status of laser cladding on titanium and its alloys: A review

F. Weng, Chuanzhong Chen, Huijun Yu, 2014 .

Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy

F. Weng, Chuanzhong Chen, Huijun Yu, 2017 .

Research and development status of laser cladding on magnesium alloys: A review

Huijun Yu, Fei Weng, F. Weng, 2017 .

Laser Cladding Induced Spherical Graphitic Phases by Super-Assembly of Graphene-Like Microstructures and the Antifriction Behavior

D. Zhao, F. Weng, B. Kong, 2020, ACS central science.

Microstructure and mechanical behavior of the laser synthesized composites modified by micro/nano scale rare earth oxides

Y. Chew, G. Bi, F. Weng, 2021, Journal of Alloys and Compounds.

Double-side friction stir welding of thick magnesium alloy: microstructure and mechanical properties

Y. Chew, B. Lee, G. Bi, 2020, Science and Technology of Welding and Joining.

Microstructures and wear properties of laser cladding Co-based composite coatings on Ti–6Al–4V

F. Weng, Chuanzhong Chen, Huijun Yu, 2015 .

Fabrication of Ni-Based Superalloys Containing Nb and Their High Temperature Oxidation Behaviors

F. Weng, Chuanzhong Chen, Huijun Yu, 2015 .

The influence of Nb on hot corrosion behavior of Ni-based superalloy at 800 °C in a mixture of Na_2SO_4–NaCl

F. Weng, Chuanzhong Chen, Huijun Yu, 2014 .

Influence of Al2O3–Y2O3 and Ce–Al–Ni amorphous alloy on physical properties of laser synthetic composite coatings on titanium alloys

S. Gong, F. Weng, Chuanzhong Chen, 2014 .

Preparation and characterization of laser cladding wollastonite derived bioceramic coating on titanium alloy.

F. Weng, Chuanzhong Chen, D. Wang, 2015, Biointerphases.

Microstructure and wear property of the Ti5Si3/TiC reinforced Co-based coatings fabricated by laser cladding on Ti-6Al-4V

F. Weng, Chuanzhong Chen, Huijun Yu, 2017 .

Fabrication of Co-Based Coatings on Titanium Alloy by Laser Cladding with CeO2 Addition

F. Weng, Chuanzhong Chen, Huijun Yu, 2016 .

High‐temperature oxidation behavior of Ni‐based superalloys with Nb and Y and the interface characteristics of oxidation scales

F. Weng, Chuanzhong Chen, Huijun Yu, 2015 .

Influence of Specific Energy on Microstructure and Properties of Laser Cladded FeCoCrNi High Entropy Alloy

F. Weng, Zhuanni Gao, Leilei Wang, 2020, Metals.

Numerical and Experimental Failure Analysis of Carbon Fiber-Reinforced Polymer-Based Pyrotechnic Separation Device

F. Weng, Jing Sun, Tong Li, 2020 .

Enhanced corrosion resistance of laser aided additive manufactured CoCrNi medium entropy alloys with oxide inclusion

Y. Chew, S. Sui, G. Bi, 2021, Corrosion Science.

Effect of cyclic heat treatment on the microstructure and mechanical properties of laser aided additive manufacturing Ti-6Al-2Sn-4Zr-2Mo alloy

Y. Chew, S. Sui, Z. Du, 2021, Advanced Powder Materials.

High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: A review

Fei Weng, F. Weng, Chuanzhong Chen, 2016 .

Excellent combination of strength and ductility of CoCrNi medium entropy alloy fabricated by laser aided additive manufacturing

Y. Chew, X. Yao, G. Bi, 2020 .

IN100 Ni-based superalloy fabricated by micro-laser aided additive manufacturing: Correlation of the microstructure and fracture mechanism

Y. Chew, S. Sui, X. Yao, 2020 .

Phase composition, microstructure and in vitro bioactivity of laser cladding CaO–ZrO2–SiO2 system coatings on titanium alloy

H. C. Li, F. Weng, Chuanzhong Chen, 2015 .

MECHANICAL PROPERTIES AND HIGH TEMPERATURE OXIDATION BEHAVIOR OF Ti–Al COATING REINFORCED BY NITRIDES ON Ti–6Al–4V ALLOY

F. Weng, Chuanzhong Chen, Huijun Yu, 2016 .

Effect of CeO2 and Y2O3 on microstructure, bioactivity and degradability of laser cladding CaO-SiO2 coating on titanium alloy.

F. Weng, D. Wang, C. Z. Chen, 2015, Colloids and surfaces. B, Biointerfaces.

Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy

Huijun Yu, Fei Weng, F. Weng, 2015 .

Influence of different amount of Na2O additive on the structure, mechanical properties and degradability of bioactive wollastonite

F. Weng, Chuanzhong Chen, D. Wang, 2016 .

Characterization of wear properties of the functionally graded material deposited on cast iron by laser-aided additive manufacturing

Y. Chew, S. K. Moon, G. Bi, 2019, The International Journal of Advanced Manufacturing Technology.

Microstructure and property of composite coatings on titanium alloy deposited by laser cladding with Co42+TiN mixed powders

F. Weng, Chuanzhong Chen, Huijun Yu, 2016 .

In situ formed TiB2/TiC complex structure in laser-alloyed coatings with improved wear property

F. Weng, Chuanzhong Chen, Huijun Yu, 2021, Ceramics International.

Micro-Structures Of Hard Coatings Deposited On Titanium Alloys By Laser Alloying Technique

Wei Li, F. Weng, Chuanzhong Chen, 2013 .

Influence of oxides on the cryogenic tensile properties of the laser aided additive manufactured CoCrNi medium entropy alloy

Y. Chew, S. Sui, X. Yao, 2021, Composites Part B: Engineering.

Microstructure and mechanical properties of ASTM A131 EH36 steel fabricated by laser aided additive manufacturing

S. Tor, Y. Chew, X. Tan, 2021 .

Additive manufacturing of multi-scale heterostructured high-strength steels

Y. Chew, S. Sui, Z. Du, 2021 .

Superior strength-ductility in laser aided additive manufactured high-strength steel by combination of intrinsic tempering and heat treatment

Y. Chew, S. Sui, Z. Du, 2021, Virtual and Physical Prototyping.

Influence of Nb and Y on Hot Corrosion Behavior of Ni–Cr-based Superalloys

F. Weng, Chuanzhong Chen, Huijun Yu, 2015 .

Repair feasibility of SS416 stainless steel via laser aided additive manufacturing with SS410/Inconel625 powders

Y. Chew, B. Lee, G. Bi, 2020, IOP Conference Series: Materials Science and Engineering.

Data-Driven Adaptive Control for Laser-Based Additive Manufacturing with Automatic Controller Tuning

Seung Ki Moon, Lequn Chen, Xiling Yao, 2020, Applied Sciences.

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Y. Chew, G. Bi, F. L. Ng, 2021, Journal of Materials Science & Technology.

Process study and characterization of properties of FerCrNiMnCo high-entropy alloys fabricated by laser-aided additive manufacturing

Guijun Bi, Youxiang Chew, Fei Weng, 2018, SPIE/COS Photonics Asia.

Influence of Weakening Groove on Cutting Results of Composites Subjected to Shaped Charge Jet

F. Weng, Jing Sun, M. Ren, 2021, Shock and Vibration.

The delamination of carbon fiber reinforced composites during cutting by flexible linear shaped charge

F. Weng, Jing Sun, Rong Chen, 2020 .

Effect of high strain rate on shear properties of carbon fiber reinforced composites

F. Weng, Jing Sun, Yi-liu Fang, 2021 .