H. Mecking

发表

Physics and phenomenology of strain hardening: the FCC case

U. F. Kocks, H. Mecking, H. Mecking, 2003 .

U. F. Kocks, H. Mecking, 1981 .

Development of localized orientation gradients in fcc polycrystals

U. F. Kocks, H. Mecking, A. Beaudoin, 1996 .

Hardening, recovery, and creep in fcc mono- and polycrystals. [Strain hardening and softening superposition, strain-rate dependence]

U. F. Kocks, H. Mecking, H. Fischer, 1976 .

A unified phenomenological description of work hardening and creep based on one-parameter models

Yuri Estrin, Y. Estrin, H. Mecking, 1984 .

Advanced deformation process modeling

U. F. Kocks, P. Dawson, J. Embury, 1997 .

Development of local shear bands and orientation gradients in fcc polycrystals

U. F. Kocks, Armand Joseph Beaudoin, H. Mecking, 1995 .

Development of shear bands in f.c.c. single crystals

H. Mecking, K. Morii, Y. Nakayama, 1985 .

Plastic Instability and Rupture Life in Tension Creep

Y. Estrin, H. Mecking, 1985 .

Interphase and intergranular stress generation in composites exhibiting plasticity in both phases

M. Daymond, H. Mecking, C. Hartig, 2005 .

In-situ measurement of texture and elastic strains with HIPPO–CRATES

H. Mecking, S. Vogel, C. Hartig, 2006 .

A Method for the Determination of the Active Slip Systems and Orientation Changes During Single Crystal Deformation

H. Mecking, H. Honneff, 1978 .

Micromechanical interaction in two-phase iron-copper polycrystals

H. Mecking, C. Hartig, B. Commentz, 1999 .

Textures of copper single crystals after rolling at room temperature

Rudolf Bauer, H. Mecking, K. Lücke, 1977 .

Influence of friction and geometry of deformation on texture inhomogeneities during rolling of Cu single crystals as an example

H. Mecking, H. Asbeck, 1978 .

Internal-State Variable Modeling of Plastic Flow

H. Mecking, A. Beaudoin, 2009 .

A “universal” temperature scale for plastic flow

U. F. Kocks, H. Mecking, N. Zárubová, 1986 .

Dynamic recrystallization in tension-deformed copper single crystals

H. Mecking, G. Gottstein, D. Zabardjadi, 1979 .

Deformation structure and nucleation of dynamic recrystallization in copper single crystals

H. Mecking, G. Gottstein, P. Karduck, 1983 .

Deformation modes in γ-TiAl as derived from the single crystal yield surface

U. F. Kocks, H. Mecking, C. Hartig, 1996 .

Mechanical Anisotropy in Sheets of γ-TiAl Alloys

H. Mecking, H. Clemens, C. Hartig, 1996 .

Textures and plastic anisotropy in γ-TiAl

H. Mecking, M. Dahms, C. Hartig, 1992 .

13 – Textures in Metals

H. Mecking, 1985 .

Work Hardening of Single-phase Polycrystals

H. Mecking, 2001 .

Syntheses: Modelling of polycrystal plasticity

H. Mecking, 1999 .

Calculation of the spread of orientations of a rolled aluminium single crystal and the nucleation of recrystallization

H. Mecking, K. Lücke, J. Hansen, 1976 .

Processing and Properties of Intermetallic/Ceramic Composites with Interpenetrating Microstructure

H. Mecking, F. Gärtner, T. Klassen, 2005 .

The development of strain-rate gradients

U. F. Kocks, J. Jonas, H. Mecking, 1979 .

Microstructural interactions during flow of two-phase titanium alloys

H. Mecking, D. Dunst, 1994 .

The effect of vacancy generation on plastic deformation

Y. Estrin, H. Mecking, 1980 .

A Mechanism for Static and Dynamic Recovery

U. F. Kocks, H. Mecking, H. Mecking, 1979 .

Creep behavior of γ-TiAl sheet material with differently spaced fully lamellar microstructures

E. Arzt, H. Mecking, H. Clemens, 2002 .

Taylor factors in materials with many deformation modes

U. F. Kocks, H. Mecking, C. Hartig, 1996 .

On the “threshold stress” for creep of particle-strengthened materials

Y. Estrin, H. Mecking, 1985 .

Development of Dislocation Structure and Orientation Gradients in Kink Bands

H. Mecking, G. Gottstein, P. Karduck, 1978 .

Stored energy of 78 K tensile deformed copper crystals

H. Mecking, G. Gottstein, H. Wollenberger, 1975 .

Deformation of Polycrystals

H. Mecking, H. Mecking, 1979 .

Anomalies of the plastic yield stress in the intermetallic compound Fe–30 at.% Al

H. Mecking, C. Hartig, M. Koêppe, 1999 .

Effect of temperature on elastic constants and deformation behavior in shear tests of Fe-30%Al single crystals

H. Mecking, M. Yoo, C. Hartig, 1998 .

Plasticity of D03-ordered Fe-Al and Fe-Al-Si single-crystals

H. Mecking, C. Hartig, W. Schröer, 1993 .

General aspects of the thermomechanical

H. Mecking, J. Seeger, A. Bartels, 1993, Metallurgical and Materials Transactions A.

DISLOCATION KINETICS AT NOT-SO-CONSTANT STRUCTURE

U. F. Kocks, H. Mecking, 1981 .

Plastic flow of γ-TiAl-based polysynthetically twinned crystals: micromechanical modeling and experimental validation

R. Lebensohn, H. Mecking, C. Hartig, 1998 .

PLASTIC FLOW OF g-TiAl-BASED POLYSYNTHETICALLY TWINNED CRYSTALS : MICROMECHANICAL MODELING AND EXPERIMENTAL VALIDATION

R. Lebensohn, H. Mecking, C. Hartig, 1998 .

Creep Behavior of γ-TiAl-Based Alloys with Fully Lamellar Microstore

E. Arzt, H. Mecking, H. Clemens, 2001, International Journal of Materials Research.

Research and Development of Titanium Aluminides in Germany

H. Mecking, A. Bartels, 1992 .

Processing and Characterization of Novel Intermetallic/Ceramic Composites

H. Mecking, T. Klassen, R. Günther, 1998 .

Plane strain deformation mechanism in lamellar Ti48at%Al

H. Mecking, J. Seeger, 1993 .

Stability of the texture of Ti-6Al-4V during rolling in the two phase field

H. Mecking, G. Lütjering, K. Morii, 1986 .

STRAIN HARDENING AND DYNAMIC RECOVERY

H. Mecking, 1981 .

Discussion on the Development of a Stage of Steady-state Flow at Large Strains

H. Mecking, A. Grinberg, 1979 .

Correlations between stress, strain and dislocation arrangement in weakly deformed copper single crystals

H. Mecking, G. Bulian, 1976 .

A new aspect of the theory of flow stress of metals

H. Mecking, K. Lücke, 1970 .

Steady State and Transient Plastic Flow of Aluminium and Aluminium Alloys

Y. Estrin, H. Mecking, A. Styczynski, 1989 .

Deformation of Single Crystals

H. Mecking, 1978 .

Analysis of dynamic recrystallization mechanism in γ-TiAl intermetallic compound based on texture measurement

H. Mecking, A. Nomoto, H. Fukutomi, 1996 .

Point defects, precipitates and the strength anomaly in ordered Fe–Al alloys

H. Mecking, C. Hartig, J. Laakmann, 2003, International Journal of Materials Research.

Effect of temperature on elastic constants and dislocation properties of Fe30% Al single crystals

H. Mecking, M. Yoo, C. Hartig, 1997 .

An extension of the Bodner-Partom model of plastic deformation

Y. Estrin, H. Mecking, 1986 .

The Development of Deformation Textures as a Function of the Phase Fractions in Two-Phase Titanium-Based Alloys

R. Dendievel, H. Mecking, D. Dunst, 1994 .

Continuous and cyclic stress relaxation in aluminium

Y. Estrin, H. Mecking, U. Quadfasel, 1991 .

A remark in connection with direct versus indirect dispersion hardening

Y. Estrin, H. Mecking, 1992 .

Texture and microstructure of Ti-49at%Al after dynamic recrystallization and annealing

H. Mecking, C. Hartig, H. Fukutomi, 1993 .

Finite element modelling of two phase Fe-Cu polycrystals

H. Mecking, C. Hartig, 2005 .

Failure of radiotherapy to resolve fatal lung damage due to paraquat poisoning.

H. Mecking, H. Höpp, J. Curtius, 1991, Chest.

Texture development in halite: Comparison of Taylor model and self-consistent theory

A. Molinari, H. Wenk, H. Mecking, 1989 .

Correlation of Strain Hardening and Creep Behaviour of γ-TiAl

H. Mecking, J. Seeger, A. Bartels, 1992 .

Formation of texture during high temperature deformation of Ti-50·3 mol.% Al

H. Mecking, S. Takagi, H. Fukutomi, 1994 .

Influence of lamellae orientation on the mechanical properties of Ti-48at%Al

H. Mecking, J. Seeger, A. Bartels, 1991 .

Creep behavior of γ-TiAl-based alloys with fully lamellar microstructure

E. Arzt, H. Mecking, H. Clemens, 2001 .

Microstructural Concepts for Strengthening of Metals, Ceramics and Polymers

H. Mecking, N. Claussen, H. Petermann, 1989 .