X. Lou

发表

Carbon nanotube (CNT) reinforced 316L stainless steel composites made by laser powder bed fusion: Microstructure and wear response

R. Jackson, Houshang Yin, Jingfan Yang, 2022, Wear.

Hardening evolution of AZ31B Mg sheet

R. H. Wagoner, M. Li, X. Lou, 2007 .

Electrical conductivity and electrochemical performance of cobalt-doped BaZr 0 . 1 Ce 0 . 7 Y 0 . 2 O 3 L d cathode

Meilin Liu, Lei Yang, X. Lou, 2011 .

Electrical conductivity and electrochemical performance of cobalt-doped BaZr0.1Ce0.7Y0.2O3−δ cathode

Meilin Liu, Lei Yang, X. Lou, 2011 .

DISCRETE NUMERICAL SIMULATIONS OF SOLID OXIDE FUEL CELL ELECTRODES DEVELOPING NEW TOOLS FOR FUNDAMENTAL INVESTIGATION

Meilin Liu, Jenghan Wang, X. Lou, 2007 .

Effect of Ethanol Chemistry on Stress Corrosion Cracking of Carbon Steel in Fuel-Grade Ethanol

Preet M. Singh, X. Lou, Di Yang, 2009 .

Hardening evolution of AZ 31 B Mg sheet

R. H. Wagoner, M. Li, X. Lou, 2006 .

Cathodic activities of oxygen and hydrogen on carbon steel in simulated fuel-grade ethanol

Preet M. Singh, X. Lou, 2011 .

Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels

X. Lou, R. Rebak, G. Was, 2019, Journal of Nuclear Materials.

Improving La0.6Sr0.4Co0.2Fe0.8O3 − δ cathode performance by infiltration of a Sm0.5Sr0.5CoO3 − δ coating

Meilin Liu, Lei Yang, X. Lou, 2009 .

Effects of heat treatment on corrosion fatigue and stress corrosion crack growth of additive-manufactured Alloy 800H in high-temperature water

Jingfan Yang, X. Lou, Lingfeng He, 2021 .

Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior

X. Lou, R. Rebak, P. Andresen, 2018 .

Film Breakdown and Anodic Dissolution during Stress Corrosion Cracking of Carbon Steel in Bioethanol

Preet M. Singh, X. Lou, Di Yang, 2010 .

Phase angle analysis for stress corrosion cracking of carbon steel in fuel-grade ethanol: Experiments and simulation

Preet M. Singh, X. Lou, Xiaoyuan Lou, 2011 .

Mechanical and metallurgical considerations on the effects of ppb-level chloride on stress corrosion cracking of low alloy steels in high-temperature water

Jingfan Yang, X. Lou, P. Andresen, 2020 .

On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing

X. Lou, P. Andresen, M. Othon, 2017 .

Role of water, acetic acid and chloride on corrosion and pitting behaviour of carbon steel in fuel-grade ethanol

Preet M. Singh, X. Lou, 2010 .

An efficient constitutive model for room-temperature, low-rate plasticity of annealed Mg AZ31B sheet

R. H. Wagoner, Ji Hoon Kim, M. Li, 2010 .

Corrosion fatigue crack growth of laser additively-manufactured 316L stainless steel in high temperature water

X. Lou, R. Rebak, M. Othon, 2017 .

Technical basis of using laser direct energy deposition as a high-throughput combinatorial method for Al-Mn alloy development

X. Lou, J. Carsley, M. Kapoor, 2021, Materials & Design.

3D‐Printed Poly(acrylic acid–vinylimidazole) Ionic Polymer Metal Composite Actuators

X. Lou, M. Auad, B. Beckingham, 2022, Macromolecular Materials and Engineering.

Intragranular irradiation-assisted stress corrosion cracking (IASCC) of 316L stainless steel made by laser direct energy deposition additive manufacturing: delta ferrite-dislocation channel interaction

X. Lou, Lingfeng He, M. Song, 2023, Journal of Nuclear Materials.

Thermal stability and microstructural evolution of additively manufactured 316L stainless steel by laser powder bed fusion at 500–800 ℃

Houshang Yin, X. Lou, B. Prorok, 2021 .

Ultrasonic nondestructive evaluation of laser powder bed fusion 316L stainless steel

Houshang Yin, X. Lou, B. Prorok, 2021 .

Void swelling in additively manufactured 316L stainless steel with hafnium composition gradient under self-ion irradiation

Yongfeng Zhang, X. Lou, Lingfeng He, 2023, Journal of Nuclear Materials.

A comparison study of void swelling in additively manufactured and cold-worked 316L stainless steels under ion irradiation

Jingfan Yang, X. Lou, Donghai Du, 2021 .

Improving Linear Separability of Pulse Wave Laser Additive Manufacturing Classifiers with Rational Feature Engineering and Selection *

Houshang Yin, X. Lou, B. Prorok, 2022, 2022 American Control Conference (ACC).

Porosity Design on Conjugated Microporous Poly(Aniline)S for Exceptional Mercury(II) Removal.

X. Lou, Changshen Ye, Jie Chen, 2021, ACS applied materials & interfaces.

Sensitization, desensitization, and carbide evolution of Alloy 800H made by laser powder bed fusion

Jingfan Yang, X. Lou, B. Prorok, 2021, Additive Manufacturing.

On the Thermal Stability of Dislocation Cellular Structures in Additively Manufactured Austenitic Stainless Steels: Roles of Heavy Element Segregation and Stacking Fault Energy

Yufeng Zheng, Houshang Yin, X. Lou, 2020, JOM.

Phase Transformation and Microstructure Evolution of AA3104 Alloy Made by Laser Additive Manufacturing

X. Lou, J. Carsley, M. Kapoor, 2022, Light Metals 2022.

Controlling the morphology and uniformity of a catalyst-infiltrated cathode for solid oxide fuel cells by tuning wetting property

Ching-Ping Wong, Ze Liu, Y. Xiu, 2010 .

Conjugated microporous poly(aniline)s for removal of low-concentration formaldehyde

X. Lou, Jinwei Zhu, Jie Chen, 2022, Chemical Engineering Science.

Understanding The Stress Corrosion Cracking Of X-65 Pipeline Steel In Fuel-Grade Ethanol

Preet M. Singh, X. Lou, Di Yang, 2010 .

The origin and formation of oxygen inclusions in austenitic stainless steels manufactured by laser powder bed fusion

X. Lou, B. Prorok, M. Karadge, 2020 .

Compositionally graded specimen made by laser additive manufacturing as a high-throughput method to study radiation damages and irradiation-assisted stress corrosion cracking

L. Shao, X. Lou, Lingfeng He, 2021, Journal of Nuclear Materials.

Pitting Corrosion Of Carbon Steel In Fuel Grade Ethanolic Environment

Preet M. Singh, X. Lou, Lindsey R. Goodman, 2009 .

Forming behavior of magnesium sheet

M. Li, X. Lou, S. Agnew, 2006 .

SA508 low alloy steel to 316L stainless steel dissimilar metal joint made by powder metallurgy hot isostatic pressing

Houshang Yin, X. Lou, D. Gandy, 2023, Materials Science and Engineering: A.

Effects of chloride transients on stress corrosion crack in pressure vessel low alloy steels in high temperature water

X. Lou, P. Andresen, R. Pathania, 2017 .

The Role of Extraneous Oxygen in the Formation of Oxide Inclusions in 316L Stainless Steel Manufactured by Laser Powder Bed Fusion

X. Lou, B. Prorok, M. Karadge, 2021, Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 7.

High-Throughput Aluminum Alloy Discovery Using Laser Additive Manufacturing

X. Lou, J. Carsley, M. Kapoor, 2021 .

Advanced Manufacturing for Nuclear Energy

X. Lou, D. Gandy, 2019, JOM.