Changhui Song

发表

In situ monitoring plasma arc additive manufacturing process with a fully convolutional network

Yikai Zhang, Jiqian Mi, Hui Li, 2022, The International Journal of Advanced Manufacturing Technology.

Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties

Di Wang, Yang Liu, Changhui Song, 2017 .

An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting

Yong-qiang Yang, Changhui Song, Mingkang Zhang, 2018, Journal of Alloys and Compounds.

Research on rapid manufacturing of CoCrMo alloy femoral component based on selective laser melting

Di Wang, Changhui Song, Yongqiang Yang, 2014 .

Design and Fabrication of a Precision Template for Spine Surgery Using Selective Laser Melting (SLM)

Di Wang, Changhui Song, Yongqiang Yang, 2016, Materials.

Effect of energy input on the UHMWPE fabricating process by selective laser sintering

Yong-qiang Yang, Changhui Song, Zefeng Xiao, 2017 .

Personalized femoral component design and its direct manufacturing by selective laser melting

Yong-qiang Yang, Changhui Song, Di Wang, 2016 .

Characteristics of typical geometrical features shaped by selective laser melting

Di Wang, Changhui Song, Yuchao Bai, 2017 .

Study on manufacturing of W-Cu alloy thin wall parts by selective laser melting

Yang Liu, Yong-qiang Yang, Changhui Song, 2015 .

Investigation of Laser Polishing of Four Selective Laser Melting Alloy Samples

Hui Li, S. Shen, Changhui Song, 2020 .

Influence mechanism of process parameters on the interfacial characterization of selective laser melting 316L/CuSn10

Yong-qiang Yang, Changhui Song, Di Wang, 2020 .

Detection of Internal Holes in Additive Manufactured Ti-6Al-4V Part Using Laser Ultrasonic Testing

Hongze Wang, Hui Li, S. Shen, 2020, Applied Sciences.

Optimizing the pinch-off problem for gradient triply periodic minimal surface cellular structures manufactured by selective laser melting

Yong-qiang Yang, Changhui Song, Mingkang Zhang, 2020 .

Influence of process parameter and strain rate on the dynamic compressive properties of selective laser-melted Ti-6Al-4V alloy

Di Wang, Changhui Song, Yonggang Wang, 2019, Applied Physics A.

The status and research progress of selective laser melting additive manufacturing

Yong-qiang Yang, Changhui Song, Fan Fu, 2017 .

Study on Interfacial Bonding Properties of NiTi/CuSn10 Dissimilar Materials by Selective Laser Melting

Yong-qiang Yang, Changhui Song, Zehua Hu, 2022, Micromachines.

Morphology and properties of CoCrMo parts fabricated by selective laser melting

Yong-qiang Yang, Changhui Song, Di Wang, 2018 .

Study on manufacturing of W-Cu alloy thin wall parts by selective laser melting

Yang Liu, Yong-qiang Yang, Changhui Song, 2014, The International Journal of Advanced Manufacturing Technology.

Research on rapid manufacturing of CoCrMo alloy femoral component based on selective laser melting

Yong-qiang Yang, Changhui Song, Di Wang, 2014, The International Journal of Advanced Manufacturing Technology.

Study on phase transformation behavior and mechanical properties of equiatomic ratio NiTi alloy formed by selective laser melting

Chaowei Yang, Yong-qiang Yang, Changhui Song, 2022, Rapid Prototyping Journal.

The design and manufacturing of a titanium alloy beak for Grus japonensis using additive manufacturing

Di Wang, Changhui Song, Yongqiang Yang, 2017 .

Research progress on the design and performance of porous titanium alloy bone implants

Yong-qiang Yang, Changhui Song, Haoyang Lei, 2023, Journal of Materials Research and Technology.

Prediction on Geometrical Characteristics of Laser Energy Deposition Based on Regression Equation and Neural Network

Changhui Song, Lisha Liu, Yang Yongqiang, 2020 .

Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder

Di Wang, Yang Liu, Changhui Song, 2015 .

Customized a Ti6Al4V Bone Plate for Complex Pelvic Fracture by Selective Laser Melting

Di Wang, Changhui Song, Yongqiang Yang, 2017, Materials.

Progress in selective laser melting equipment, related biomedical metallic materials and applications

Yong-qiang Yang, Changhui Song, Di Wang, 2018 .

Interfacial microstructure and mechanical properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting

Yong-qiang Yang, Changhui Song, Di Wang, 2019, Materials Science and Engineering: A.

In-situ monitoring laser based directed energy deposition process with deep convolutional neural network

Yucong Duan, Hui Li, Jiqian Mi, 2021, Journal of Intelligent Manufacturing.

Review of Underwater Ship Hull Cleaning Technologies

Changhui Song, Weicheng Cui, 2020, Journal of Marine Science and Application.

Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting

Yong-qiang Yang, Changhui Song, Di Wang, 2018, Materials Science and Engineering: A.

Effect of manufacturing steps on the interfacial defects of laser powder bed fusion 316L/CuSn10

Yong-qiang Yang, Changhui Song, Di Wang, 2021 .

Bimetal printing of high entropy alloy/metallic glass by laser powder bed fusion additive manufacturing

Hao Wang, Changhui Song, Hailu Luo, 2022, Intermetallics.

The surface quality, microstructure and properties of SS316L using a variable area scan strategy during quad-laser large-scale powder bed fusion

Yong-qiang Yang, Changhui Song, Di Wang, 2022, Materials Science and Engineering: A.

Selective laser melting dental CoCr alloy: microstructure, mechanical properties and corrosion resistance

Yong-qiang Yang, Changhui Song, Di Wang, 2021, Rapid Prototyping Journal.

Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts

Yong-qiang Yang, Changhui Song, Di Wang, 2016 .

Flow field analysis for multilaser powder bed fusion and the influence of gas flow distribution on parts quality

Yong-qiang Yang, Changhui Song, Di Wang, 2022, Rapid Prototyping Journal.

Evaluation of topology-optimized lattice structures manufactured via selective laser melting

Di Wang, Changhui Song, Zefeng Xiao, 2018 .

In situ capture of spatter signature of SLM process using maximum entropy double threshold image processing method based on genetic algorithm

Hui Li, Yilin Zhu, Sheng Liu, 2020 .

Selective laser melting of NiTi alloy with superior tensile property and shape memory effect

Zhenfeng Sun, Ying Yang, Zhonghan Li, 2019, Journal of Materials Science & Technology.

Pure tantalum manufactured by laser powder bed fusion: Influence of scanning speed on the evolution of microstructure and mechanical properties

Yong-qiang Yang, Changhui Song, K. Xu, 2022, International Journal of Refractory Metals and Hard Materials.

Microstructure and mechanical properties of CuSn/18Ni300 bimetallic porous structures manufactured by selective laser melting

Yong-qiang Yang, Changhui Song, Di Wang, 2019, Materials & Design.

Microstructure and Mechanical Properties of AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion Under Nitrogen and Argon Atmosphere

Yong-qiang Yang, Changhui Song, Di Wang, 2021, Acta Metallurgica Sinica (English Letters).

Process Optimization and Tailored Mechanical Properties of a Nuclear Zr-4 Alloy Fabricated via Laser Powder Bed Fusion

Ming Yan, Changjun Han, Yong-qiang Yang, 2023, Micromachines.

Effect of the heat treatment on corrosion and mechanical properties of CoCrMo alloys manufactured by selective laser melting

Yong-qiang Yang, Changhui Song, Zefeng Xiao, 2018, Rapid Prototyping Journal.

Research on the Warping and Dross Formation of an Overhang Structure Manufactured by Laser Powder Bed Fusion

Yong-qiang Yang, Changhui Song, V. Trofimov, 2023, Applied Sciences.

Research on the redesign of precision tools and their manufacturing process based on selective laser melting (SLM)

Yang Liu, Di Wang, Yongqiang Yang, 2016 .

Process Characterization of Ideal Porous Structure Manufacture Based on Selective Laser Melting (SLM)

Yong-qiang Yang, Changhui Song, Di Wang, 2014 .

The microstructure and properties evolution of SS316L fabricated by magnetic field-assisted laser powder bed fusion

Changjun Han, Yong-qiang Yang, Changhui Song, 2022, Materials Science and Engineering: A.

Impacts of residual 3D printing metal powders on immunological response and bone regeneration: an in vivo study

Ming Yan, Wei Tang, Changhui Song, 2023, Journal of Materials Science: Materials in Medicine.

Manufacture of composition gradient material part by selective laser melting

Yong-qiang Yang, Changhui Song, Di Wang, 2020 .

In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere

Yong-qiang Yang, Changhui Song, Di Wang, 2023, Composites Part B: Engineering.

Rational design and additive manufacturing of alumina-based lattice structures for bone implant

Yong-qiang Yang, Changhui Song, Haoyang Lei, 2022, Materials & Design.

Microstructure and Mechanical Properties of Gh5188 Superalloy Additively Manufactured Via Ultrasonic-Assisted Laser Powder Bed Fusion

Changjun Han, Yong-qiang Yang, Changhui Song, 2023, Social Science Research Network.

Laser powder bed fusion of a tungsten-nickel-ferrum alloy via in-situ alloying: Densification, microstructure, and mechanical properties

Changjun Han, Yong-qiang Yang, Changhui Song, 2022, Powder Technology.

Microstructural and mechanical property evolution of a nuclear zirconium-4 alloy fabricated via laser powder bed fusion and annealing heat treatment

Ming Yan, Changjun Han, Yong-qiang Yang, 2023, Virtual and Physical Prototyping.

Molecular dynamics simulations of the formation and evolution of hydrogen pores during laser powder bed fusion manufacturing

Hui Li, S. Shen, Yong-qiang Yang, 2021, MRS Communications.

Radial gradient design enabling additively manufactured low-modulus gyroid tantalum structures

Changjun Han, Yong-qiang Yang, Changhui Song, 2023, International Journal of Mechanical Sciences.

Design and direct manufacture of non-assembly abacus by Selective Laser Melting

Yang Liu, Di Wang, Yongqiang Yang, 2014, Other Conferences.

In situ alloying Ti–Ag antibacterial biomaterials via laser powder bed fusion: Microstructure, mechanical properties and bioperformance

Changhui Song, Haoyang Lei, Lisha Liu, 2023, Materials Today Advances.

Simultaneous regulation of strength and ductility of laser powder bed fusion manufactured Haynes 230 alloy

Wenjie Liu, Changhui Song, Yicang Huang, 2023, Journal of Alloys and Compounds.

In-situ synthesis of spatial heterostructure Ti composites by laser powder bed fusion to overcome the strength and plasticity trade-off

Changhui Song, Yunmian Xiao, Hanxiang Zhou, 2024, International Journal of Machine Tools and Manufacture.

Functional gradient design of additive manufactured gyroid tantalum porous structures: Manufacturing, mechanical behaviors and permeability

Changhui Song, K. Xu, Zheng-hua Deng, 2024, Journal of Manufacturing Processes.

Role of heterogenous microstructure and deformation behavior in achieving superior strength-ductility synergy in zinc fabricated via laser powder bed fusion

Changhui Song, Di Wang, Chenrong Ling, 2024, International Journal of Extreme Manufacturing.

Research on Microstructure and Properties Enhancement of TiN/GH5188 Co-Superalloy Composite Fabricated by Laser Powder Bed Fusion

Changhui Song, Yunmian Xiao, Zhongwei Yan, 2024, Materials Science and Engineering: A.