H. Van Swygenhoven

发表

Operando X-ray diffraction during laser 3D printing

G. Tinti, S. Hocine, H. Van Swygenhoven, 2020 .

A miniaturized selective laser melting device for operando X-ray diffraction studies

G. Tinti, H. V. Swygenhoven, S. Hocine, 2020 .

Plastic Deformation with Reversible Peak Broadening in Nanocrystalline Nickel

B. Schmitt, H. Van Swygenhoven, S. Van Petegem, 2004, Science.

Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO2-x doped alumina granules

F. Marone, K. Wegener, H. Van Swygenhoven, 2022, Journal of the European Ceramic Society.

Origin of anomalous slip in tungsten.

H. Van Swygenhoven, S. Van Petegem, D. Grolimund, 2014, Physical review letters.

Stresses and Strains in Cruciform Samples Deformed in Tension

H. Van Swygenhoven, S. Van Petegem, T. Panzner, 2017, Experimental mechanics.

A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation

E. Polatidis, H. Van Swygenhoven, M. Knezevic, 2019, Acta Materialia.

A Miniaturized Biaxial Deformation Rig for in Situ Mechanical Testing

A. Guitton, H. Van Swygenhoven, S. Van Petegem, 2017, Experimental Mechanics.

POLDI: Materials Science and Engineering Instrument at SINQ

H. Van Swygenhoven, S. Van Petegem, A. Evans, 2009 .

Computer simulation of displacement cascades in nanocrystalline ni.

H. Van Swygenhoven, M. Victoria, P. Derlet, 2002, Physical review letters.

Mechanical response of stainless steel subjected to biaxial load path changes: Cruciform experiments and multi-scale modeling

R. Lebensohn, C. Tomé, H. Van Swygenhoven, 2018, International Journal of Plasticity.

The interplay between deformation mechanisms in austenitic 304 steel during uniaxial and equibiaxial loading

H. V. Swygenhoven, E. Polatidis, J. Čapek, 2019, Materials Science and Engineering: A.

Microstructure evolution of stainless steel subjected to biaxial load path changes: In-situ neutron diffraction and multi-scale modeling

J. Čapek, H. Van Swygenhoven, T. Panzner, 2019, International Journal of Plasticity.

In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting

I. Kuběna, H. Van Swygenhoven, N. Casati, 2019, Acta Materialia.

Intergranular Strain Evolution During Biaxial Loading: A Multiscale FE-FFT Approach

R. Lebensohn, J. Čapek, H. Van Swygenhoven, 2017, JOM.

{110} Slip with {112} slip traces in bcc Tungsten

H. Van Swygenhoven, S. Van Petegem, C. Borca, 2013, Scientific Reports.

Deformation and Degradation of Superelastic NiTi Under Multiaxial Loading

E. Polatidis, H. Van Swygenhoven, S. Van Petegem, 2018, Acta Materialia.

Impact of in situ nanomechanics on physical metallurgy

E. Polatidis, H. Van Swygenhoven, J. Michler, 2019, MRS Bulletin.

In situ characterization of work hardening and springback in grade 2 α-titanium under tensile load

H. Van Swygenhoven, S. Van Petegem, T. Connolley, 2019 .

Iron Oxide Doped Spray Dried Aluminum Oxide Granules for Selective Laser Sintering and Melting of Ceramic Parts

K. Wegener, H. Van Swygenhoven, D. Ferreira Sánchez, 2019, Advanced Engineering Materials.

Atomistic simulation of a dislocation shear loop interacting with grain boundaries in nanocrystalline aluminium

H. Van Swygenhoven, E. Bitzek, D. Weygand, 2009 .

Stacking fault energies and slip in nanocrystalline metals

H. Van Swygenhoven, P. Derlet, A. G. Frøseth, 2004, Nature materials.

Cracks, Porosity and Microstructure of Ti Modified Polymer-Derived Sioc Revealed by Absorption-, XRD- and XRF-Contrast 2D and 3D Imaging

H. Van Swygenhoven, Lorenz Hagelüken, Pradeep V. Warriam Sasikumar, PhD, 2020, Acta Materialia.

Dimples on Nanocrystalline Fracture Surfaces As Evidence for Shear Plane Formation

H. Van Swygenhoven, A. Hasnaoui, P. Derlet, 2003, Science.

Influence of thermo-mechanical history on the ordering kinetics in 18 carat Au alloys

N. Baluc, H. Van Swygenhoven, S. Van Petegem, 2020, Acta Materialia.

On the microstructure of nanoporous gold: an X-ray diffraction study.

B. Schmitt, H. Van Swygenhoven, S. Van Petegem, 2008, Nano letters.

Effect of helium as process gas on laser powder bed fusion of Ti-6Al-4V studied with operando diffraction and radiography

E. Hryha, S. Hocine, H. Van Swygenhoven, 2022 .

Operando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends

C. Kenel, D. Dunand, S. Hocine, 2022, Additive Manufacturing.

Direct observation of crack formation mechanisms with operando Laser Powder Bed Fusion X-ray imaging

F. Marone, S. Hocine, H. Van Swygenhoven, 2022, Additive Manufacturing.

Effect of pre-existing immobile dislocations on the evolution of geometrically necessary dislocations during fatigue

H. Van Swygenhoven, N. Grilli, A. Irastorza-Landa, 2017 .

Low-frequency vibrational properties of nanocrystalline materials.

H. Van Swygenhoven, L. J. Lewis, R. Meyer, 2001, Physical review letters.

Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel

K. Willner, H. Van Swygenhoven, S. Van Petegem, 2022, International Journal of Plasticity.

In Situ Biaxial Mechanical Testing at the Neutron Time-of-Flight Diffractometer POLDI

H. Van Swygenhoven, S. Van Petegem, M. Niffenegger, 2013 .

Neutron Diffraction and Diffraction Contrast Imaging for Mapping the TRIP Effect under Load Path Change

M. Strobl, E. Polatidis, H. Van Swygenhoven, 2020, Materials.

Stresses and Strains in Cruciform Samples Deformed in Tension

H. Van Swygenhoven, S. Van Petegem, T. Panzner, 2017, Experimental mechanics.

The non-degenerate core structure of a ½⟨111⟩ screw dislocation in bcc transition metals modelled using Finnis–Sinclair potentials: The necessary and sufficient conditions

S.L. Dudarev, S. Dudarev, M. Gilbert, 2009 .

Positron Annihilation Study of Nanocrystalline Ni3Al: Simulations and Measurements

D. Schryvers, H. Van Swygenhoven, S. Van Petegem, 2001 .

Helium-vacancy cluster in a single bcc iron crystal lattice

H. Van Swygenhoven, J. Chen, M. Victoria, 2011, Journal of physics. Condensed matter : an Institute of Physics journal.

Strain rates in molecular dynamics simulations of nanocrystalline metals

H. Van Swygenhoven, P. Derlet, C. Brandl, 2009 .

Vibrational properties of grain boundaries in nanocrystalline Ni using second moment potentials

H. Van Swygenhoven, S. Van Petegem, P. Derlet, 2009 .

Formation of dislocation loops during He clustering in bcc Fe

H. Van Swygenhoven, J. Chen, M. Victoria, 2011, Journal of physics. Condensed matter : an Institute of Physics journal.

Large Scale 3-Dimensional Atomistic Simulations of Screw Dislocations Interacting with Coherent Twin Boundaries in Al, Cu and Ni Under Uniaxial and Multiaxial Loading Conditions

H. Van Swygenhoven, M. Dupraz, S. Rao, 2019, Acta Materialia.

Ultrahigh Strength in Nanocrystalline Materials Under Shock Loading

Raymond F. Smith, B. Remington, E. Bringa, 2005, Science.

Deciphering the interactions between single arm dislocation sources and coherent twin boundary in nickel bi-crystal

D. Schryvers, H. Van Swygenhoven, T. Pardoen, 2021, Nature Communications.

Grain Boundaries and Dislocations

H. Van Swygenhoven, 2002, Science.

Dislocation cross-slip in nanocrystalline fcc metals.

H. Van Swygenhoven, E. Bitzek, P. Derlet, 2008, Physical review letters.

A High Resolution Digital Image Correlation Study under Multiaxial Loading

E. Polatidis, H. Van Swygenhoven, M. Šmíd, 2018, Experimental Mechanics.

Atomistic simulation of dislocation emission in nanosized grain boundaries

H. Van Swygenhoven, A. Hasnaoui, P. Derlet, 2003 .

Phase Studies of Additively Manufactured Near Beta Titanium Alloy-Ti55511

T. Kurzynowski, H. Van Swygenhoven, T. Maimaitiyili, 2020, Materials.

Quantification of the sensitivity range in neutron dark-field imaging.

C. Grünzweig, M. Strobl, H. Van Swygenhoven, 2015, The Review of scientific instruments.

Radiation damage near grain boundaries

H. Van Swygenhoven, M. Victoria, P. Derlet, 2003 .

Polycrystalline materials. Grain boundaries and dislocations.

H. Van Swygenhoven, 2002, Science.

Dislocation mediated plasticity in nanocrystalline Al: the strongest size

H. Van Swygenhoven, P. Derlet, C. Brandl, 2011 .

Atomistic Simulations of Dislocations in Confined Volumes

D. McDowell, J. Li, H. Van Swygenhoven, 2009 .

Athermal critical stresses for dislocation propagation in nanocrystalline aluminium

H. Van Swygenhoven, P. Derlet, C. Brandl, 2010 .

Microstructure and Defect Characterization of Nanostructured Ni3Al

H. Van Swygenhoven, S. Van Petegem, C. Dauwe, 2002 .

An Innovative Selective Laser Melting Process for Hematite‐Doped Aluminum Oxide

K. Wegener, H. Van Swygenhoven, N. Casati, 2019, Advanced Engineering Materials.

A local chemical potential approach within the variable charge method formalism

A. Elsener, H. Van Swygenhoven, O. Politano, 2008 .

Atomistic Simulations of Mechanics of Nanostructures

H. V. Swygenhoven, H. Van Swygenhoven, Han-Chen Huang, 2009 .

A Miniaturized Biaxial Deformation Rig for in Situ Mechanical Testing

A. Guitton, H. Van Swygenhoven, S. Van Petegem, 2017 .

High-frequency vibrational properties of metallic nanocrystalline grain boundaries.

H. Van Swygenhoven, P. Derlet, 2004, Physical review letters.

Time-resolved Laue diffraction of deforming micropillars.

H. Van Swygenhoven, S. Van Petegem, D. Grolimund, 2007, Physical review letters.

On the microstructure of nanoporous gold: an X-ray diffraction study.

B. Schmitt, H. Van Swygenhoven, S. Van Petegem, 2008, Nano letters.