Haiou Zhang

发表

Optimization of the geometry for the end lateral extension path strategy to fabricate intersections using laser and cold metal transfer hybrid additive manufacturing

Yaoyu Ding, Runsheng Li, Guilan Wang, 2020 .

Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing

Chenglei Diao, Stewart Williams, Xiangman Zhou, 2018, International Journal of Heat and Mass Transfer.

Investigation of the mechanical properties on hybrid deposition and micro-rolling of bainite steel

Guilan Wang, Youheng Fu, Haiou Zhang, 2017 .

3-D model of thermo-fluid and electrochemical for planar SOFC

Guilan Wang, Haiou Zhang, Guilan Wang, 2007 .

Metal direct prototyping by using hybrid plasma deposition and milling

Guilan Wang, Haiou Zhang, Xinhong Xiong, 2009 .

Experiment research on green machining of clay prototype for plasma spray tooling

Guilan Wang, Haiou Zhang, F. Meng, 2014 .

Comparison of heat and mass transfer between planar and MOLB-type SOFCs

Guilan Wang, Haiou Zhang, Yunzhen Yang, 2008 .

Computational analysis of thermo-fluid and electrochemical characteristics of MOLB-type SOFC stacks

Guilan Wang, Haiou Zhang, Yunzhen Yang, 2007 .

Study of rapid and direct thick coating deposition by hybrid plasma-laser manufacturing

Guilan Wang, Ying-ping Qian, Haiou Zhang, 2006 .

A node-based smoothed point interpolation method (NS-PIM) for thermoelastic problems with solution bounds

Guiyong Zhang, Gui-Rong Liu, Haiou Zhang, 2009 .

Research on the Micro-Extrusion Process of Copper T2 with Different Ultrasonic Vibration Modes

Linhong Xu, Haiou Zhang, Guangchao Han, 2019, Metals.

Experimental investigation into effects of different ultrasonic vibration modes in micro-extrusion process

Linhong Xu, Haiou Zhang, Fuchun Liu, 2021, Journal of Manufacturing Processes.

The characteristics of arc beam shaping in hybrid plasma and laser deposition manufacturing

Q. Zheng, Guilan Wang, Haiou Zhang, 2006 .

THREE-DIMENSIONAL NUMERICAL SIMULATION OF ARC AND METAL TRANSPORT FOR STACKING DEPOSITION IN ARC WELDING BASED ADDITIVE MANUFACTURING

Guilan Wang, Haiou Zhang, Xiangman Zhou, 2016 .

Rapid hard tooling by plasma spraying for injection molding and sheet metal forming

Guilan Wang, Haiou Zhang, Guilan Wang, 2001 .

A novel integrated temperature investigation approach of sprayed coatings during APS process

Guilan Wang, Haiou Zhang, Yunzhen Yang, 2009 .

Cylindrical slicing and path planning of propeller in wire and arc additive manufacturing

Rui Wang, Haiou Zhang, Wang Guilan, 2020 .

Additive manufacturing of Ti-6Al-4V alloy by hybrid plasma-arc deposition and microrolling: Grain morphology, microstructure, and tensile properties

Guilan Wang, Haiou Zhang, Z. Fan, 2022, Science China Technological Sciences.

GEOMETRIC MODEL AND NUMERICAL SIMULATION FOR THE LAYING PROCESS OF WIRE ROPE

Haiou Zhang, Guilan Wang, Jianfang Sun, 2002 .

A novel metamorphic mechanism for efficient additive manufacturing of components with variable wall thickness

Guilan Wang, Haiou Zhang, Yang Xie, 2014 .

Study on Metamorphic Rolling Mechanism for Metal Hybrid Additive Manufacturing

Haiou Zhang, G. Wangb, Daoman Ruia, 2013 .

CASTING-FORGING-MILLING COMPOSITE ADDITIVE MANUFACTURING THECHNOLOGY

Runsheng Li, Guilan Wang, Rui Wang, 2017 .

Numerical simulation of coating growth and pore formation in rapid plasma spray tooling

Guilan Wang, Haiou Zhang, Yanxiang Chen, 2001 .

Fabrication and electrochemical performance of solid oxide fuel cell components by atmospheric and suspension plasma spray

Guilan Wang, Haiou Zhang, Yunzhen Yang, 2009 .

Effect of wire composition on microstructure and properties of wire and arc additive manufactured ZAlCu5MnCdVA aluminum alloy

Runsheng Li, Guilan Wang, Rui Wang, 2022, Rapid Prototyping Journal.

Simulation of powder transport in plasma jet via hybrid Lattice Boltzmann method and probabilistic algorithm

Guilan Wang, Haiou Zhang, Shengde Hu, 2006 .

WC-reinforced iron matrix composites fabricated by wire arc additive manufacturing combined with gravity-driven powder feeding: particle transportation and size effects

Haiou Zhang, X. Bai, Xue-hong Yu, 2022, Rapid Prototyping Journal.

Guilan Wang, Haiou Zhang, Hu Yanan, 2021 .

Modeling of the moving induction heating used as secondary heat source in weld-based additive manufacturing

Guilan Wang, Xingwang Bai, Haiou Zhang, 2015 .

Influence of in situ micro-rolling on the improved strength and ductility of hybrid additively manufactured metals

Ni Ao, Guilan Wang, Haiou Zhang, 2021, Engineering Fracture Mechanics.

Simulation of microstructure evolution during hybrid deposition and micro-rolling process

Guilan Wang, Haiou Zhang, X. Bai, 2016, Journal of Materials Science.

An in-process multi-feature data fusion nondestructive testing approach for wire arc additive manufacturing

Fanrong Kong, Xi Chen, Youheng Fu, 2021, Rapid Prototyping Journal.

A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model

Fanrong Kong, Xi Chen, Youheng Fu, 2021, The International Journal of Advanced Manufacturing Technology.

Fabrication of finely structured silicon-supported SOFC with anode deposited by multi-phase plasma spraying

Guilan Wang, Haiou Zhang, Daoman Rui, 2012 .

Improved corrosion resistance of nickel-aluminum bronze by electron beam powder bed fusion

Jun Yu Li, Wenzheng Zhai, Guilan Wang, 2022, Materials Chemistry and Physics.

Robotic Digital Manufacturing of FGM Component

Haiou Zhang, Guilan Wang, Haiping Zou, 2008, ICIRA.

Comparison of energy consumption between hybrid deposition & micro-rolling and conventional approach for wrought parts

Zhao Gang, Cheng Huang, Guilan Wang, 2021 .

Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling

Guilan Wang, Wang Xiangping, Haiou Zhang, 2013 .

Investigation, modeling and optimization of abnormal areas of weld beads in wire and arc additive manufacturing

Runsheng Li, Guilan Wang, Haiou Zhang, 2020 .

Numerical simulation of the transient multiphase field during plasma deposition manufacturing composite materials

Guilan Wang, Haiou Zhang, F. Kong, 2009 .

Microstructures and properties of wire and arc additively manufactured steel matrix composites with addition of WC by gravity-driven side powder feeding

Haiou Zhang, X. Bai, Xiangman Zhou, 2022, Journal of Manufacturing Processes.

Structural integrity issues of additively manufactured railway components: Progress and challenges

P. Withers, Haiou Zhang, Junsheng Wang, 2023, Engineering Failure Analysis.

Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing

Guilan Wang, Xiangman Zhou, Xingwang Bai, 2016 .

Deep learning based online metallic surface defect detection method for wire and arc additive manufacturing

Runsheng Li, Guilan Wang, Haiou Zhang, 2023, Robotics Comput. Integr. Manuf..

Review on field assisted metal additive manufacturing

E. Lavernia, Y. Chew, Dafan Du, 2023, International Journal of Machine Tools and Manufacture.

A novel method of bead modeling and control for wire and arc additive manufacturing

Runsheng Li, Guilan Wang, Haiou Zhang, 2021 .

SIMULATION OF HYBRID WAAM AND ROTATION COMPRESSION FORMING PROCESS

Yuanxun Wang, Guilan Wang, Haiou Zhang, 2019 .

Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism

Haiou Zhang, Haiou Zhang, Yang Xie, 2016 .

Numerical Simulation of Transient Multiphase Field During Hybrid Plasma-Laser Deposition Manufacturing

Guilan Wang, Haiou Zhang, F. Kong, 2008 .

+Rapid Surface Defects Detection in Wire and Arc Additive Manufacturing Based on Laser Profilometer

Runsheng Li, Guilan Wang, Haiou Zhang, 2021, Measurement.

In-situ quality monitoring of laser hot wire cladding process based on multi-sensing diagnosis and machine learning model

Haiou Zhang, Y. Fu, F. Kong, 2023, Journal of Manufacturing Processes.

Microstructure and mechanical properties of selective laser melted AlSi7Mg

Guilan Wang, Haiou Zhang, Hao Zhang, 2021 .

Influence of micro-rolling on the strength and ductility of plasma-arc additively manufactured Ti-6Al-4V alloys

Guilan Wang, Haiou Zhang, Chuandong Wu, 2022, Journal of Materials Research and Technology.

End lateral extension path strategy for intersection in wire and arc additive manufactured 2319 aluminum alloy

Guilan Wang, Fusheng Dai, Runsheng Li, 2019, Rapid Prototyping Journal.

Research of rapid and direct thick coatings deposition by hybrid plasma-laser

Guilan Wang, Ying-ping Qian, Haiou Zhang, 2006 .

Numerical simulation of multiphase transient field during plasma deposition manufacturing

Fanrong Kong, Guilan Wang, Haiou Zhang, 2006 .

Fundamental study on plasma deposition manufacturing

Guilan Wang, Jipeng Xu, Haiou Zhang, 2003 .

Modeling of Heat Transfer, Fluid Flow and Solute Difiusion in the Plasma Deposition Manufacturing Functionally Gradient Materials

Guilan Wang, Haiou Zhang, F. Kong, 2009 .

Multiaxis wire and arc additive manufacturing for overhangs based on conical substrates

Runsheng Li, Fusheng Dai, Haiou Zhang, 2021, Rapid Prototyping Journal.

Research on microstructure and mechanical properties of hybrid plasma arc and micro-rolling additive manufacturing of Inconel 718 superalloy

Runsheng Li, Guilan Wang, Haiou Zhang, 2022, Rapid Prototyping Journal.

Evaluating the energy properties of the short-flow process based on the industrial metabolism: A case study on the metal 3D printing of hybrid deposition and micro rolling (HDMR)

Haiou Zhang, Cheng Huang, F. Hou, 2023, Journal of Manufacturing Processes.

Investigation on friction characteristics of micro double cup extrusion assisted by different ultrasonic vibration modes

Linhong Xu, Haiou Zhang, Guangchao Han, 2022, The International Journal of Advanced Manufacturing Technology.

Experiment research on green machining of clay prototype for plasma spray tooling

Guilan Wang, Haiou Zhang, Fei Meng, 2013, The International Journal of Advanced Manufacturing Technology.

An Integrated Investigation Approach for Coating Temperature Measurement and Control During Plasma Spraying

Guilan Wang, Haiou Zhang, Yunzhen Yang, 2008 .

Transition Metal (Fe2O3, Co3O4 and NiO)-Promoted CuO-Based α-MnO2 Nanowire Catalysts for Low-Temperature CO Oxidation

Haiou Zhang, Leilei Xu, Mindong Chen, 2023, Catalysts.

Effect of path strategy on residual stress and distortion in laser and cold metal transfer hybrid additive manufacturing

Runsheng Li, Guilan Wang, Fusheng Dai, 2021 .

Fabrication of Functionally Graded SOFC by APS

Guilan Wang, Haiou Zhang, Yunzhen Yang, 2007 .

Modeling of the moving induction heating used as secondary heat source in weld-based additive manufacturing

Guilan Wang, Haiou Zhang, X. Bai, 2014, The International Journal of Advanced Manufacturing Technology.

Improving prediction accuracy of thermal analysis for weld-based additive manufacturing by calibrating input parameters using IR imaging

Haiou Zhang, Guilan Wang, Xingwang Bai, 2013 .

A two-stage unsupervised approach for surface anomaly detection in wire and arc additive manufacturing

Runsheng Li, Guilan Wang, Haiou Zhang, 2023, Comput. Ind..

Hybrid interlayer hot rolling and wire arc additive manufacturing of Al-Mg alloy: Microstructure, mechanical properties and strengthening mechanism

Runsheng Li, Haiou Zhang, Y. Fu, 2024, Journal of Materials Research and Technology.