S. Clark

发表

In situ radiographic and ex situ tomographic analysis of pore interactions during multilayer builds in laser powder bed fusion

Peter D. Lee, M. Olbinado, A. Rack, 2020, Additive Manufacturing.

In situ X-ray quantification of melt pool behaviour during directed energy deposition additive manufacturing of stainless steel

Peter D. Lee, I. Todd, S. Marussi, 2021 .

Melt pool morphology in directed energy deposition additive manufacturing process

Peter D. Lee, S. Marussi, R. Atwood, 2020, IOP Conference Series: Materials Science and Engineering.

Sinter formation during directed energy deposition of titanium alloy powders

S. Marussi, R. Atwood, Lorna Sinclair, 2022, International Journal of Machine Tools and Manufacture.

Unraveling compacted graphite evolution during solidification of cast iron using in-situ synchrotron X-ray tomography

Peter D. Lee, R. Atwood, S. Clark, 2021, Carbon.

Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing

K. Fezzaa, C. L. Leung, S. Marussi, 2021, Nature Communications.

Capturing Marangoni flow via synchrotron imaging of selective laser melting

C. L. Leung, S. Marussi, S. Clark, 2020, IOP Conference Series: Materials Science and Engineering.

An electron beam melting system for in-situ synchrotron X-ray monitoring

K. Eliceiri, T. Sun, K. Fezzaa, 2022, Additive Manufacturing Letters.

Time resolved in-situ multi-contrast X-ray imaging of melting in metals

M. Endrizzi, C. Rau, S. Marussi, 2022, Scientific Reports.

Investigating nano-precipitation in a V-containing HSLA steel using small angle neutron scattering

D. G. McCartney, Peter D. Lee, S. Clark, 2018 .

A novel approach for interpreting the solidification behaviour of peritectic steels by combining CSLM and DSC

B. Santillana, S. Clark, S. Sridhar, 2017 .

Analysis of the extent of interphase precipitation in V-HSLA steels through in-situ characterization of the γ/α transformation

S. Clark, S. Sridhar, A. Rijkenberg, 2016 .

Application of In-Situ Material Characterization Methods to Describe Role of Mo During Processing of V-Bearing Micro-Alloyed Steels

S. Clark, P. Srirangam, S. Seetharaman, 2016 .

Application of In-Situ Material Characterization Methods to Describe Role of Mo During Processing of Vbearing Micro-Alloyed Steels

S. Clark, P. Srirangam, S. Seetharaman, 2015 .

Achieving homogeneity in a high-Fe b -Ti alloy laser-printed from blended elemental powders

J. Willmott, A. Phillion, Peter D. Lee, 2021 .

Keyhole uctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing

K. Fezzaa, C. L. Leung, S. Marussi, 2021 .

A phase-field model for interphase precipitation in V-micro-alloyed structural steels

S. Clark, A. Rahnama, S. Sridhar, 2017 .

Interphase Precipitation – An Interfacial Segregation Model

S. Clark, S. Sridhar, Y. Lan, 2017 .

Machine learning for predicting occurrence of interphase precipitation in HSLA steels

Alireza Rahnama, Seetharaman Sridhar, S. Clark, 2018, Computational Materials Science.

In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA Steels

S. Clark, S. Sridhar, Y. Lan, 2016 .

Small-Angle Neutron Scattering Reveals the Effect of Mo on Interphase Nano-Precipitation in Ti-Mo Micro-Alloyed Steels

E. Surrey, S. Clark, Yiqiang Wang, 2020, Scripta Materialia.

In situ synchrotron investigation of degenerate graphite nodule evolution in ductile cast iron

R. Atwood, S. Clark, M. Azeem, 2021, Acta Materialia.

In-situ Synchrotron imaging of keyhole mode multi-layer laser powder bed fusion additive manufacturing

E. Boller, M. Olbinado, A. Rack, 2020 .

Mitigating keyhole pore formation by nanoparticles during laser powder bed fusion additive manufacturing

K. Fezzaa, Qilin Guo, Lianyi Chen, 2022, Additive Manufacturing Letters.

Dynamic Multicontrast X-Ray Imaging Method Applied to Additive Manufacturing.

J. Schulz, M. Endrizzi, S. Marussi, 2021, Physical review letters.

Modelling the complex evaporated gas flow and its impact on particle spattering during laser powder bed fusion

J. Jakumeit, J. Schleifenbaum, S. Clark, 2021, Additive Manufacturing.

Synchrotron X-ray imaging of directed energy deposition additive manufacturing of titanium alloy Ti-6242

I. Todd, C. L. Leung, S. Marussi, 2021 .

Correlative Synchrotron X-Ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

C. L. Leung, S. Marussi, R. Atwood, 2020, Acta Materialia.

Nano-mechanical properties of Fe-Mn-Al-C lightweight steels

S. Clark, A. Rahnama, H. Kotadia, 2018, Scientific Reports.

Quantification of evolution of multiple simultaneous phase transformations using dilation curve analysis (DCA)

S. Clark, A. Kamyabi-Gol, S. Sridhar, 2016 .

A phase-field model investigating the role of elastic strain energy during the growth of closely spaced neighbouring interphase precipitates

S. Clark, A. Rahnama, S. Sridhar, 2018 .

Growth mechanism of primary needles during the solidification of chromium carbide overlays

S. Clark, P. Mendez, S. Seetharaman, 2018, Acta Materialia.

Synchrotron Imaging of Keyhole Mode Multi-layer Laser 1 Powder Bed Fusion Additive Manufacturing

E. Boller, A. Rack, I. Todd, 2020 .

Controlling solute channel formation using magnetic fields

K. Pericleous, R. Atwood, A. Kao, 2023, Acta Materialia.

Material Flow Visualization during Friction Stir Welding using High-Speed X-Ray Imaging

K. Fezzaa, S. Clark, F. Pfefferkorn, 2022, Manufacturing Letters.

Synchrotron X-ray Imaging of Directed Energy Deposition 1 Additive Manufacturing of Titanium Alloy Ti-6242 2

C. L. Leung, R. Atwood, S. Clark, 2021 .