Dengzhi Wang

发表

High-power laser-matter interaction during laser powder bed fusion

Jie Yin, Xiaoyan Zeng, Haihong Zhu, 2019, Additive Manufacturing.

An image features assisted line selection method in laser-induced breakdown spectroscopy.

Xiangyou Li, Xiaoyan Zeng, Dengzhi Wang, 2020, Analytica chimica acta.

Laser-induction hybrid cladding of different coatings on rail surface: Microstructure, wear properties and contact fatigue behaviors

Xiaoyan Zeng, Dengzhi Wang, Q. Hu, 2021 .

Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel

Xiaoyan Zeng, Dengzhi Wang, Zemin Wang, 2013 .

Classification accuracy improvement by data preprocessing in handheld laser-induced breakdown spectroscopy

Yongfeng Lu, Xiangyou Li, Xiaoyan Zeng, 2019, Analytical Methods.

Residual stress and cracking behaviors of Cr13Ni5Si2 based composite coatings prepared by laser-induction hybrid cladding

Xiaoyan Zeng, Dengzhi Wang, Q. Hu, 2015 .

A Review of Spatter in Laser Powder Bed Fusion Additive Manufacturing: In Situ Detection, Generation, Effects, and Countermeasures

Hao Li, D. You, Longchao Cao, 2022, Micromachines.

Microstructures and performances of Cr13Ni5Si2 based composite coatings deposited by laser cladding and laser-induction hybrid cladding

Xiaoyan Zeng, Dengzhi Wang, Q. Hu, 2014 .

Comparison on the microstructure, bending properties and tribological behaviors of rail materials treated by laser dispersed quenching and induction assisted laser dispersed quenching

Xiaoyan Zeng, Dengzhi Wang, L. Meng, 2021 .

Comparison on the wear properties and rolling contact fatigue damage behaviors of rails by laser cladding and laser-induction hybrid cladding

Xiaoyan Zeng, Dengzhi Wang, Meng Li, 2020 .

Influence of W content on microstructure and corrosion behavior of laser cladded Inconel 718 coating

X. Zeng, Dengzhi Wang, Wenji Song, 2022, Surface and Coatings Technology.

Relationship between pool characteristic and weld porosity in laser arc hybrid welding of AA6082 aluminum alloy

Xiaoyan Zeng, Jie Yin, M. Gao, 2017 .

Vaporization of alloying elements and explosion behavior during laser powder bed fusion of Cu–10Zn alloy

Guoqing Wang, Haihong Zhu, H. Wei, 2021 .

Correlation between forming quality and spatter dynamics in laser powder bed fusion

Jie Yin, Xiaoyan Zeng, Haihong Zhu, 2020 .

Investigation on the rolling wear and damage properties of laser dispersed quenched rail materials treated with different ratios

C. Su, Dengzhi Wang, Z. Zhou, 2019, Tribology International.

High-temperature slide wear of Ni-Cr-Si metal silicide based composite coatings on copper substrate by laser-induction hybrid cladding

Meng Li, Xiaoyan Zeng, Jie Yin, 2017 .

Corrosion behaviors of Cr13Ni5Si2 based composite coatings prepared by laser-induction hybrid cladding

Xiaoyan Zeng, Jie Yin, Dengzhi Wang, 2016 .

A comparison of microstructure and mechanical properties of laser cladding and laser-induction hybrid cladding coatings on full-scale rail

Xiaoyan Zeng, Dengzhi Wang, Meng Li, 2019, Materials Science and Engineering: A.

Microstructure and mechanical properties of the coatings in laser cladding and laser-induction hybrid cladding of full-scale rail

Li Meng, Chen Xian, Qianwu Hu, 2018, SPIE/COS Photonics Asia.

Microstructures and mechanical properties of WCP/Ti-6Al-4V composite coatings by laser melt injection and laser-induction hybrid melt injection

Xiaoyan Zeng, Dengzhi Wang, Q. Hu, 2020 .

Microstructural evolution and strengthening mechanisms of Inconel 718 alloy with different W addition fabricated by laser cladding

X. Zeng, Dengzhi Wang, Wenji Song, 2022, Materials Science and Engineering: A.

Microstructure and Wear of W-Particle-Reinforced Al Alloys Prepared by Laser Melt Injection

Xiaoyan Zeng, Dengzhi Wang, Wenji Song, 2022, Micromachines.

Influences of parameters on microstructures and mechanical properties of Cr13Ni5Si2 based composite coating by laser-induction hybrid cladding

Xiaoyan Zeng, Dengzhi Wang, Q. Hu, 2015 .

Dual-beam laser-matter interaction at overlap region during multi-laser powder bed fusion manufacturing

Guoqing Wang, H. Wei, Haihong Zhu, 2021 .

Laser cladding high-performance maraging-steel coatings on bainitic cross wing rails assisted with in-situ induction heating: Microstructure and performance

X. Zeng, Dengzhi Wang, Q. Hu, 2023, Journal of Materials Processing Technology.

A novel laser surface compositing by selective laser quenching to enhance railway service life

Meng Li, Xiaoyan Zeng, Dengzhi Wang, 2017 .

Investigation on the rolling wear and damage properties of laser discrete quenched rail material with different quenching shapes and patterns

C. Su, Dengzhi Wang, Z. Zhou, 2019, Surface and Coatings Technology.

Thermal behavior and grain growth orientation during selective laser melting of Ti-6Al-4V alloy

Guoqing Wang, Zemin Wang, Haihong Zhu, 2018, Journal of Materials Processing Technology.

Study on deposition rate and laser energy efficiency of Laser-Induction Hybrid Cladding

Xiaoyan Zeng, Dengzhi Wang, Q. Hu, 2016 .

Effect of induction post-heating temperature on the morphology, microstructure and mechanical performance of the heat affected zone in laser-induction hybrid cladding of full-scale rail

Xiaoyan Zeng, Dengzhi Wang, Q. Hu, 2021, Journal of Materials Research and Technology.

Study on W/Ni interface reaction and strengthening mechanism of tungsten particle reinforced nickel-based alloys by laser-direct energy deposition

X. Zeng, Dengzhi Wang, Wenji Song, 2022, Materials Science and Engineering: A.

Effects of laser power on texture evolution and mechanical properties of laser-arc hybrid additive manufacturing

M. Gao, Dengzhi Wang, Mengcheng Gong, 2021 .

Effects of added tungsten on the microstructure and mechanical properties of laser-directed energy deposited Inconel 625 alloys

X. Zeng, Dengzhi Wang, Wenji Song, 2023, Materials Science and Engineering: A.

Influence of tungsten particle size on microstructure and mechanical properties of high strength and tough tungsten particle-reinforced nickel-based composites by laser-direct energy deposition

X. Zeng, Dengzhi Wang, Wenji Song, 2023, Journal of Materials Science & Technology.