T. Phan

发表

Evaluation of a thermomechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V

L. Levine, W. King, M. Strantza, 2019, Additive Manufacturing.

Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP

M. E. Kassner, L. Levine, T. Langdon, 2013 .

Synchrotron X-ray microbeam diffraction measurements of full elastic long range internal strain and stress tensors in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing

M. E. Kassner, L. Levine, R. Xu, 2016 .

A coupled CFD-DEM framework to model submerged granular flow

H. Bui, G. Nguyen, T. Phan, 2019 .

Unsupervised Learning of Dislocation Motion

Austin R. Benson, T. Phan, A. Beaudoin, 2019, Acta Materialia.

The effects of particle size distribution on the rheological properties of the powder and the mechanical properties of additively manufactured 17-4 PH stainless steel.

M. A. Donmez, T. Phan, M. Peltz, 2021, Additive manufacturing.

The Creep and Fracture Properties of Additively Manufactured Inconel 625

M. E. Kassner, L. Levine, T. Phan, 2021, Materialia.

Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing

Mark R. Stoudt, Eric A. Lass, Lyle E. Levine, 2017, Metallurgical and Materials Transactions A.

Formation of the Ni 3 Nb δ-phase in stress-relieved Inconel 625 produced via laser powder-1 bed fusion additive manufacturing 2 3

L. Levine, M. Stoudt, E. Lass, 2017 .

Coupled experimental and computational study of residual stresses in additively manufactured Ti-6Al-4V components

L. Levine, W. King, M. Strantza, 2018, Materials Letters.

Bulk Mechanical Properties Testing of Metallic Marginal Glass Formers

M. E. Kassner, V. Eliasson, T. Phan, 2016 .

A Finite Energy Bandwidth-Based Diffraction Simulation Framework for Thermal Processing Applications

Kevontrez K. Jones, T. Phan, J. Bernier, 2020, JOM.

Basis for the Bauschinger effect in copper single crystals: changes in the long-range internal stress with reverse deformation

M. E. Kassner, L. Levine, R. Xu, 2019, Journal of Materials Science.

Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4V

L. Levine, W. King, M. Strantza, 2021 .

Demonstration of a laser powder bed fusion combinatorial sample for high-throughput microstructure and indentation characterization.

A. Pintar, T. Phan, H. Joress, 2021, Materials & design.

Experimental Investigation of Residual Stress and its Impact on Machining in Hybrid Additive/Subtractive Manufacturing

Jarred C. Heigel, Jason C. Fox, Thomas Gnäupel-Herold, 2018 .

X-ray microbeam measurements of long range internal stresses in commercial purity aluminum processed by multiple passes of equal-channel angular pressing

M. E. Kassner, L. Levine, T. Langdon, 2014 .

Refinements in phase fraction determination of textured alloys from transmission diffraction data

T. Phan, A. Creuziger, D. Pagan, 2021, Journal of Applied Crystallography.

Outcomes and Conclusions from the 2018 AM-Bench Measurements, Challenge Problems, Modeling Submissions, and Conference

Fan Zhang, Maria Strantza, Carelyn Campbell, 2020, Integrating Materials and Manufacturing Innovation.

Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates

Lyle Levine, Jarred Heigel, Thien Phan, 2020, Integrating Materials and Manufacturing Innovation.

Uncertainty of particle size measurements using dynamic image analysis

M. A. Donmez, T. Phan, J. Whiting, 2019, CIRP Annals.

Location-Specific Microstructure Characterization Within IN625 Additive Manufacturing Benchmark Test Artifacts

M. E. Williams, L. Levine, J. Heigel, 2020, Integrating Materials and Manufacturing Innovation.

In Situ Thermography of the Metal Bridge Structures Fabricated for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018)

L. Levine, J. Heigel, B. Lane, 2020, Journal of Research of the National Institute of Standards and Technology.

Combining Synchrotron X-ray Diffraction, Mechanistic Modeling, and Machine Learning for In Situ Subsurface Temperature Quantification during Laser Melting

T. DebRoy, T. Mukherjee, T. Phan, 2023, 2302.03146.

Combining Synchrotron X-ray Diﬀraction, Mechanistic Modeling, and Machine Learning for In Situ Subsurface Temperature Quantiﬁcation during Additive Manufacturing

T. Mukherjee, T. Phan, D. Pagan, 2023 .

Elastic Residual Strain and Stress Measurements and Corresponding Part Deflections of 3D Additive Manufacturing Builds of IN625 AM-Bench Artifacts Using Neutron Diffraction, Synchrotron X-Ray Diffraction, and Contour Method

Michael R. Hill, Maria Strantza, Jarred Heigel, 2019, Integrating Materials and Manufacturing Innovation.

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

E. Garboczi, T. Phan, S. Moylan, 2020, Experimental Mechanics.

Micromechanical response quantification using high-energy X-rays during phase transformations in additively manufactured 17-4 stainless steel

T. Phan, D. Pagan, F. Kim, 2019, Materials Science and Engineering: A.

Exploring the role of Type-II residual stresses in a laser powder bed fusion nickel-based superalloy using measurement and modeling

Saikumar R. Yeratapally, W. Tayon, T. Phan, 2024, International Journal of Fatigue.