D. Sharma

发表

Insights into the wear behaviour of electron beam melted Ti–6Al–4V alloy in the as-built and the heat-treated conditions

D. Sharma, M. Kamran, Nilesh Kumar Paraye, 2021, Journal of Manufacturing Processes.

Simulation of rod clad interaction and effect of various parameters on distribution of temperature in the cylindrical nuclear fuel rod

K. Pandey, D. Sharma, 2017 .

Two-Phase Metallic Thermal Interface Materials Processed Through Liquid Phase Sintering Followed by Accumulative Roll Bonding

D. Sharma, Praveen Kumar, R. Tiwari, 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Numerical Investigation of heat transfer enhancement of SiO2-water based nanofluids in Light water nuclear reactor

Gautam Choubey, K. Pandey, D. Sharma, 2017 .

Numerical Investigation of Heat Transfer Characteristics in Triangular Channel in Light Water Nuclear Reactor by using CuO-Water based Nanofluids

K. Pandey, D. Sharma, 2015 .

Experimental Validation for Electrical, Thermal and Overall Energy Generation from Open Low Concentration Ratio-Based Photovoltaic Hybrid Collector

D. Sharma, G. Tiwari, T. Bhatti, 2020 .

Computational Study of Effect of Increasing Heat Flux on Convective Heat Transfer in Sub Channels of Carbon Dioxide Flow at Pressure above Critical Value

K. Pandey, D. Sharma, 2015 .

Tailoring the hydrophobicity of copper surface with ion beam irradiation

D. Sharma, Ranjit Kumar, B. Sikarwar, 2019, Radiation Effects and Defects in Solids.

Analysis of Incompressible fluid flow over wedge with different angles

Ankush Kumar, D. Sharma, S. Shankaracharya, 2015 .

Influence of cooling rate on the precipitation kinetics of nanoscale isothermal ω-phase in metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr

M. Fitzpatrick, D. Fabijanic, D. Sharma, 2020 .

Surface modification of titanium alloy using hBN powder mixed dielectric through micro-electric discharge machining

D. Sharma, S. Mohanty, A. Das, 2020 .

Self Assembly of Super-hydrophobic Nanotextured Methyl Functionalized Silica on Copper and Aluminium Surfaces for Moist Air Condensation

D. Sharma, Ranjit Kumar, D. Avasthi, 2020 .

A correlation of metallic surface roughness with its hydrophobicity for dropwise condensation

D. Sharma, D. Avasthi, B. Sikarwar, 2020 .

On the Trail of Better Dispersion: Rheological Characterization of Moderately Loaded, Finely Balanced, Negatively Buoyant Ceramic Suspensions

D. Sharma, A. Mukherjee, 2016 .

Time-Dependent and Shear-Dependent Transient Viscosity of an Alumina Suspension

D. Sharma, A. Mukherjee, Harlal Singh, 2015 .

Experimental analysis and characterization of SiC and RE oxides reinforced Al-6063 alloy based hybrid composites

Vinod Kumar, D. Sharma, V. Sharma, 2020 .

Essential parameters responsible for rheological assessment of concentrated dis- persion:-a comprehensive review

D. Sharma, A. Mukherjee, 2015 .

First Report to Characterize the Rheological Properties at Consecutive Transient Low Shear Rate of the Alumina Suspension Stabilized by Phosphate Ester

D. Sharma, A. Mukherjee, 2014 .

A Study to Investigate the Influence of Coal Properties on Bit Wear-ability of Roadheader

D. Sharma, B. Choudhary, M. Das, 2017 .

OPTIMIZATION OF PROCESS PARAMETERS OF WIRE EDM USING ZINC-COATED BRASS WIRE

Deepak Sharma, Nitesh Kumar, Rakesh Kumar Yadav, 2012 .

A Review on Solution of Inverse Heat Conduction Problems

D. Sharma, A. K. Parwani, C. Shrivastava, 2014 .

Computational simulation of multi-strut central lobed injection of hydrogen in a scramjet combustor

Ajoy Debbarma, Krishna Murari Pandey, Gautam Choubey, 2016 .

A review on the flame holding mechanisms used for the development of scramjet engines

K. Pandey, D. Sharma, Namrata Bordoloi, 2021 .

Facile Fabrication of Nanostructured Microchannels for Flow Boiling Heat Transfer Enhancement

D. Sharma, S. Saha, R. Raj, 2019 .

Thermohydraulic characterization of flow boiling in a nanostructured microchannel heat sink with vapor venting manifold

D. Sharma, S. Saha, R. Raj, 2019, International Journal of Heat and Mass Transfer.

Review on Enhanced Thermal Conductivity of Colloidal Suspension of Nanosized Particles (Nanofluids)

D. Sharma, S. Pal, Tikamchand Soni, 2014 .

Transient viscosities of negatively buoyant concentrated alumina suspensions

D. Sharma, A. Mukherjee, Harlal Singh, 2016 .

Effect of Volume Loading by varying the Particle Size in Well Dispersed Alumina Suspension using Non-Aqueous Solvent

D. Sharma, A. Mukherjee, 2014 .

A Study on Aging Behaviour of Well-DispersedAlumina Suspensions by Varying the ParticleSize using Poly vinyl Butyral as Binder

D. Sharma, A. Mukherjee, S. Chauhan, 2014 .

Recent Developments in Fabrication of Super-Hydrophobic Surfaces: A Review

D. Sharma, Ranjit Kumar, D. Avasthi, 2019, Lecture Notes in Mechanical Engineering.

Progress in engineering design of Indian LLCB TBM set for testing in ITER

H. L. Swami, R. Bhattacharya, Chandan Danani, 2014 .

Surface hardening by in-situ grown composite layer on microalloyed steel employing TIG arcing process

P. K. Ghosh, D. Sharma, N. Kumar, 2018, Surface and Coatings Technology.

Surface hardening characteristics of microalloyed steel during ex-situ and in-situ Al2O3 reinforcement under TIG arcing

P. K. Ghosh, D. Sharma, N. Kumar, 2019 .

Surface modification of microalloyed steel by silicon carbide reinforcement using tungsten inert gas arcing

P. K. Ghosh, D. Sharma, Sudhir Kumar, 2018, Materials Research Express.

On restructuring the microstructure of Ti-6Al-7Nb alloy before surface engineering

Y. Jiao, D. Sharma, J. Lawrence, 2020 .

Thermal Hydraulics Problems in Nuclear Reactors : A Review

K. Pandey, D. Sharma, 2015 .

Helium cooled dual breeder blanket–preliminary design analyses of a candidate breeding blanket concept for near term Indian DEMO fusion reactor

D. Sharma, P. Chaudhuri, H. Swami, 2020, International Journal of Energy Research.

Ecological friendly functional fluids and lubricant techniques in machining processes: a review

K. Pandey, D. Sharma, 2018 .

Thermal performance analysis and experimental validation of primary chamber of plasma pyrolysis system during preheating stage using CFD analysis in ANSYS CFX

S. Chaturvedi, D. Sharma, P. Murugan, 2020 .

An ingenious fluidic capacitor for complete suppression of thermal fluctuations in two-phase microchannel heat sinks

D. Sharma, Anurag Kumar, S. Saha, 2020 .

Preparation of rivet shape head from sintered aluminum specimen at varying strain rates by cold forging

Shashank Srivastava, D. Sharma, A. Pandey, 2020 .

Numerical Simulation of Thermal Energy Storage using Phase Change Material

D. Sharma, N. Thakur, A. Rai, 2023, 2306.11624.

Numerical Investigation of Heat Transfer Characteristics of Al2O3–H2O Based Nanofluid Flow in Light Water Nuclear Reactor

D. Sharma, 2021 .