A. Evans

发表

Mechanical anisotropy of additively manufactured stainless steel 316L: An experimental and numerical study

B. Skrotzki, G. Mohr, A. Charmi, 2021 .

Neutron diffraction investigations on residual stresses contributing to the fatigue crack growth in ferritic steel tubular bridges

A. Nussbaumer, A. Evans, Claire Acevedo, 2012 .

The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure

I. Serrano-Muñoz, A. Kromm, G. Nolze, 2020, Scientific Reports.

The Effect of Fatigue on Residual Peening Stresses in Aerospace Components

P. Withers, A. Evans, C. Woodward, 2005 .

On the interplay of microstructure and residual stress in LPBF IN718

I. Serrano-Muñoz, A. Kromm, A. Ulbricht, 2020, Journal of Materials Science.

Characterization of laser peening residual stresses in Al 7075 by synchrotron diffraction and the contour method

P. Withers, A. Evans, G. Johnson, 2007 .

High resolution X-ray powder diffraction measurements of the wet rust from the drinking water distribution system

A. Evans, W. Nowicki, P. Piszora, 2009 .

Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 718

I. Serrano-Muñoz, E. Polatidis, J. Čapek, 2022, Journal of Materials Science.

In situ room temperature tensile deformation of a 1% CrMoV bainitic steel using synchrotron and neutron diffraction

H. V. Swygenhoven, A. Evans, S. Holdsworth, 2011 .

Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches

L. Edwards, M. Fitzpatrick, A. Evans, 2011 .

Influence of quenching and aging on residual stress in Al–Zn–Mg–Cu alloy 7449

S. Van Petegem, A. Evans, D. Tanner, 2012 .

Lattice misfit during ageing of a polycrystalline nickel-base superalloy

A. Evans, H. Stone, L. Connor, 2013 .

Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatments

P. Withers, P. Withers, C. Rodopoulos, 2010 .

Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue

Philip J. Withers, Michael Preuss, Giovanni Bruno, 2005 .

Carbonation profiles in cement paste analyzed by neutron diffraction

A. Evans, I. Galan, C. Andrade, 2012 .

On the Effect of Nb on the Microstructure and Properties of Next Generation Polycrystalline Powder Metallurgy Ni-Based Superalloys

M. Hardy, P. Bowen, A. Evans, 2018, Metallurgical and Materials Transactions A.

On the influence of heat treatment on microstructure and mechanical behavior of laser powder bed fused Inconel 718

I. Serrano-Muñoz, M. Sprengel, A. Evans, 2020 .

Developing Alloy Compositions for Future High Temperature Disk Rotors

M. Hardy, P. Bowen, A. Evans, 2020 .

Stress relaxation of shot-peened UDIMET 720Li under solely elevated-temperature exposure and under isothermal fatigue

M. Preuss, G. Bruno, P. J. Withers, 2005 .

Connecting Diffraction-Based Strain with Macroscopic Stresses in Laser Powder Bed Fused Ti-6Al-4V

I. Sevostianov, G. Requena, A. Evans, 2020, Metallurgical and Materials Transactions A.

Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals

I. Serrano-Muñoz, A. Kromm, A. Ulbricht, 2021, Metals.

Scanning Manufacturing Parameters Determining the Residual Stress State in LPBF IN718 Small Parts

I. Serrano-Muñoz, A. Kromm, A. Ulbricht, 2021, Advanced Engineering Materials.

Combining neutron diffraction and imaging for residual strain measurements in a single crystal turbine blade

J. A. James, S. Pierret, H. Van Swygenhoven, 2012 .

Origin of localized rafting in Ni-based single crystal turbine blades before service and its influence on the mechanical properties

H. V. Swygenhoven, T. Etter, A. Evans, 2013 .

Residual Stress Evolution during Manufacture of Aerospace Forgings

Mark Hardy, Michael Preuss, M. G. Glavicic, 2012 .

Stress relaxation through ageing heat treatment – a comparison between in situ and ex situ neutron diffraction techniques

M. Preuss, M. Hardy, A. Evans, 2012 .

Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges.

J. Buffière, T. Niendorf, G. Meneghetti, 2021, Progress in materials science.

On the determination of residual stresses in additively manufactured lattice structures

M. Sprengel, A. Evans, G. Bruno, 2021, Journal of applied crystallography.

Stored elastic energy in aluminium alloy AA 6063 billets: residual stress measurements and thermomechanical modelling

J. Drezet, A. Evans, T. Pirling, 2012 .

Separation of the Formation Mechanisms of Residual Stresses in LPBF 316L

I. Serrano-Muñoz, G. Mohr, K. Sommer, 2020 .

Characterisation of Residual Stresses Generated by Laser Shock Peening by Neutron and Synchrotron Diffraction

P. Withers, P. Peyre, A. Evans, 2009 .

The effect of d0 reference value on a neutron diffraction study of residual stress in a γ/γ′ nickel-base superalloy

M. Preuss, M. Hardy, A. Evans, 2013 .

Triaxial Residual Stress in Laser Powder Bed Fused 316L: Effects of Interlayer Time and Scanning Velocity

I. Serrano-Muñoz, A. Kromm, G. Mohr, 2021, Advanced Engineering Materials.

Study of Residual Stresses Introduced by Laser Shock Peening in Wide Chord Fan Blades by Neutron and Synchrotron Diffraction

M. Preuss, P. Withers, A. Evans, 2004 .

Influence of a 265 °C heat treatment on the residual stress state of a PBF-LB/M AlSi10Mg alloy

G. Requena, M. Madia, Ilaria Roveda, 2022, Journal of Materials Science.

Near Surface Residual Stress Determination of Laser Shock Peening by Neutron Diffraction

P. Withers, A. Evans, G. Bruno, 2003 .

Mechanical performance and deformation mechanisms at cryogenic temperatures of 316L stainless steel processed by laser powder bed fusion: In situ neutron diffraction

A. Evans, O. Magdysyuk, S. Kabra, 2022, Scripta Materialia.