A. Salem

发表

Small scale testing of IN718 single crystals manufactured by EB-PBF

C. Körner, Mohsen Seifi, M. R. Gotterbarm, 2020 .

Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of EBM Ti–6Al–4V

Daniel P. Satko, Mohsen Seifi, J. Lewandowski, 2017 .

Strain hardening due to deformation twinning in α-titanium : Constitutive relations and crystal-plasticity modeling

Surya R. Kalidindi, S. L. Semiatin, Ayman A. Salem, 2005 .

Workflow for integrating mesoscale heterogeneities in materials structure with process simulation of titanium alloys

Surya R. Kalidindi, Joshua Shaffer, A. A. Salem, 2014, Integrating Materials and Manufacturing Innovation.

The use of X-ray diffraction to determine slip and twinning activity in commercial-purity (CP) titanium

A. Salem, L. Balogh, S. Semiatin, 2008 .

Evolution of grain and subgrain structure during cold rolling of commercial-purity titanium

A. Salem, S. Semiatin, S. Zherebtsov, 2011 .

Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium

S. Kalidindi, A. Salem, R. Doherty, 2002 .

Prediction of crystallographic texture evolution and anisotropic stress–strain curves during large plastic strains in high purity α-titanium using a Taylor-type crystal plasticity model

Surya R. Kalidindi, A. A. Salem, S. Kalidindi, 2007 .

AFRL-RX-WP-JA-2015-0096 WORKFLOW FOR INTEGRATING MESOSCALE HETEROGENEITIES IN MATERIALS STRUCTURE WITH PROCESS SIMULATION OF TITANIUM ALLOYS ( POSTPRINT )

Daniel P. Satko, A. Salem, S. Semiatin, 2015 .

Formation of nanostructures in commercial-purity titanium via cryorolling

V. I. Sokolenko, A. Salem, S. Semiatin, 2013 .

Validation and Uncertainty Quantification for Manufacturing Design Accounting for Material Variability

S. Niezgoda, A. Salem, M. Yuan, 2018 .

Grain-structure development in heavily cold-rolled alpha-titanium

G. S. D’yakonov, A. Salem, S. Semiatin, 2014 .

AFRL-ML-WP-TP-2006-467 PREDICTION OF CRYSTALLOGRAPHIC TEXTURE EVOLUTION AND ANISOTROPIC STRESS-STRAIN CURVES DURING LARGE PLASTIC STRAINS IN HIGH PURITY α-TITANIUM USING A TAYLOR-TYPE CRYSTAL PLASTICITY MODEL ( PREPRINT )

S. Kalidindi, A. Salem, Xianping Wu, 2006 .

AFRL-RX-WP-TP-2008-4338 A COUPLED EBSD / EDS METHOD TO DETERMINE THE PRIMARY – AND SECONDARY – ALPHA TEXTURES IN TITANIUM ALLOYS WITH DUPLEX MICROSTRUCTURES ( PREPRINT )

A. Salem, S. Semiatin, M. Glavicic, 2007 .

The Influence of Grain Size on Twinning and Microstructure Refinement During Cold Rolling of Commercial-Purity Titanium

A. Salem, S. Semiatin, S. Zherebtsov, 2016, Metallurgical and Materials Transactions A.

Strain hardening of titanium: role of deformation twinning

S. Kalidindi, A. Salem, R. Doherty, 2003 .

Strain hardening due to deformation twinning in α-titanium: Mechanisms

Surya R. Kalidindi, A. A. Salem, S. L. Semiatin, 2006 .

Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb

Daniel P. Satko, J. Lewandowski, A. Salem, 2017 .

A coupled EBSD/EDS method to determine the primary- and secondary-alpha textures in titanium alloys with duplex microstructures

A. A. Salem, S. L. Semiatin, M. G. Glavicic, 2008 .

Data Driven Tools and Methods for Microtexture Classification and Dwell Fatigue Life Prediction in Dual Phase Titanium Alloys

A. Salem, A. Pilchak, M. Glavicic, 2020, MATEC Web of Conferences.

Plastic Flow During Hot Working of Ti-7Al

A. Salem, S. Semiatin, A. Pilchak, 2020, Metallurgical and Materials Transactions A.

Overview of Materials Qualification Needs for Metal Additive Manufacturing

John J. Lewandowski, Jack Beuth, Ola L. A. Harrysson, 2016 .

Role of Deformation Twinning on Strain Hardening in Cubic and Hexagonal Polycrystalline Metals

S. Kalidindi, A. Salem, R. Doherty, 2003 .

X-ray line-broadening analysis of deformation mechanisms during rolling of commercial-purity titanium

A. Salem, S. Semiatin, M. Glavicic, 2004 .

Progress in the Advanced Titanium Microstructure and Modeling Program

A. Salem, S. Semiatin, A. Pilchak, 2016 .

The Effect of Preheat Temperature and Inter-Pass Reheating on Microstructure and Texture Evolution During Hot Rolling of Ti-6Al-4V (Preprint)

A. Salem, S. Semiatin, M. Glavicic, 2008 .

Effect of microstructure on oxygen rich layer evolution and its impact on fatigue life during high-temperature application of α/β titanium

Daniel P. Satko, S. Kalidindi, A. Salem, 2016 .

Models for severe plastic deformation by equal-channel angular extrusion

M. J. Saran, A. A. Salem, S. L. Semiatin, 2004 .

319. Icme of Microtexture Evolution in Dual Phase Titanium Alloys

S. Rokhlin, A. Salem, A. Pilchak, 2016 .

Burgers vector population, dislocation types and dislocation densities in single grains extracted from a polycrystalline commercial-purity Ti specimen by X-ray line-profile analysis

A. Salem, L. Balogh, S. Semiatin, 2010 .

Variant Selection During Cooling after Beta Annealing of Ti-6Al-4V Ingot Material

A. A. Salem, Adam L. Pilchak, S. L. Semiatin, 2012, Metallurgical and Materials Transactions A.

The Effect of Lath Orientations on Oxygen Ingress in Titanium Alloys

Joshua Shaffer, A. A. Salem, Jaimie Tiley, 2014, Metallurgical and Materials Transactions A.

ANISOTROPY OF THE HOT PLASTIC DEFORMATION OF Ti-6Al-4V SINGLE-COLONY SAMPLES (PREPRINT)

A. Salem, S. Semiatin, 2009 .

Effects of Post-processing on Microstructure and Mechanical Properties of SLM-Processed IN-718

Daniel P. Satko, J. Lewandowski, A. Salem, 2018 .

Microstructure informatics using higher-order statistics and efficient data-mining protocols

Surya R. Kalidindi, Stephen R. Niezgoda, A. A. Salem, 2011 .

Characterization of Microstructure, Texture, and Microtexture in Near-Alpha Titanium Mill Products

A. Salem, S. Semiatin, J. Shaffer, 2013, Metallurgical and Materials Transactions A.

Hot Deformation of Ti-6Al-4V Single-Colony Samples (Preprint)

A. Salem, S. Semiatin, 2008 .

Texture Separation for α / β Titanium Alloys

A. Salem, 2009 .

Quantifying the effect of microstructure variability on the yield strength predictions of Ni-base superalloys

A. A. Salem, J. Tiley, A. Salem, 2017 .

AFRL-RX-WP-TP-2008-4344 THE EFFECT OF PREHEAT TEMPERATURE AND INTER-PASS REHEATING ON MICROSTRUCTURE AND TEXTURE EVOLUTION DURING HOT ROLLING OF Ti-6 Al-4 V ( PREPRINT )

A. Salem, S. Semiatin, M. Glavicic, 2008 .

Modeling Anisotropic Stress-Strain Response and Crystallographic Texture Evolution in α-Titanium during Large Plastic Deformation using Taylor-Type Models: Influence of Initial Texture and Purity

Surya R. Kalidindi, A. A. Salem, S. Kalidindi, 2008 .

Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum

S. Kalidindi, T. Langdon, A. Salem, 2006 .

Microstructure-Informed Cloud Computing for Interoperability of Materials Databases and Computational Models: Microtextured Regions in Ti Alloys

Joshua Shaffer, A. A. Salem, Richard A. Kublik, 2017, Integrating Materials and Manufacturing Innovation.

Progress in the Advanced Titanium Microstructure and Modeling Program

A. Salem, S. Semiatin, C. Woodward, 2016 .

A Comparison of Deformation Textures and Mechanical Properties Predicted by Different Crystal Plasticity Codes

P. Dawson, S. Kalidindi, R. Lebensohn, 2008 .

COMPARISON OF DEFORMATION TEXTURES AND MECHANICAL PROPERTIES PREDICTED BY DIFFERENT CRYSTAL PLASTICITY CODES ( PREPRINT )

P. Dawson, S. Kalidindi, R. Lebensohn, 2008 .

AFRL-RX-WP-TP-2008-4343 HOT DEFORMATION OF Ti-6 Al-4 V SINGLE-COLONY SAMPLES ( PREPRINT )

A. Salem, S. Semiatin, 2008 .