Li Wang

发表

Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting

D. Kong, X. Ni, C. Dong, 2019, Construction and Building Materials.

Beneficial effect of reversed austenite on the intergranular corrosion resistance of martensitic stainless steel

D. Kong, C. Dong, C. Man, 2019, Corrosion Science.

Long-term corrosion kinetics and mechanism of magnesium alloy AZ31 exposed to a dry tropical desert environment

D. Kong, C. Dong, C. Man, 2020 .

Powder recycling effects on porosity development and mechanical properties of Hastelloy X alloy during laser powder bed fusion process

D. Kong, X. Ni, C. Dong, 2022, Additive Manufacturing.

Systematic Insight into Chloride Concentration, Applied Potential and Time Effect on the Passive Film of Cu-Zn-Ni Ternary Alloy in Alkaline Solution

D. Kong, C. Dong, C. Man, 2018, Journal of Materials Engineering and Performance.

Modulating Schottky Barrier of MoS 2 to Enhance Hydrogen Evolution Reaction Activity by Incorporating with Vertical Graphene Nanosheets Derived from Organic Liquid Waste

Li Wang, Xiaodong Li, Jian-hua Yan, 2018, ChemElectroChem.

Different corrosion behaviors between α and β phases of Ti6Al4V in fluoride-containing solutions: Influence of alloying element Al

D. Kong, C. Dong, Li Wang, 2020 .

Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores

D. Kong, C. Dong, C. Man, 2020 .

About metastable cellular structure in additively manufactured austenitic stainless steels

D. Kong, X. Ni, C. Dong, 2021 .

Effect of microstructure on corrosion behavior of high strength martensite steel—A literature review

C. Dong, C. Man, Li Wang, 2021, International Journal of Minerals, Metallurgy and Materials.

The effect of microstructure on corrosion behavior of ultra-high strength martensite steel-A literature review

C. Dong, C. Man, Qiang Yu, 2020 .

The passivity of selective laser melted 316L stainless steel

D. Kong, X. Ni, C. Dong, 2020 .

Superior resistance to hydrogen damage for selective laser melted 316L stainless steel in a proton exchange membrane fuel cell environment

D. Kong, X. Ni, C. Dong, 2020 .

The effect of ɳ-Ni3Ti precipitates and reversed austenite on the passive film stability of nickel-rich Custom 465 steel

C. Dong, C. Man, Jizheng Yao, 2019, Corrosion Science.

Unexpected Stress Corrosion Cracking Improvement Achieved by Recrystallized Layer in Al-Zn-Mg Alloy

C. Dong, Xiaogang Li, Li Wang, 2021, Journal of Materials Engineering and Performance.

Relationship between elements migration of α-AlFeMnSi phase and micro-galvanic corrosion sensitivity of Al—Zn—Mg alloy

C. Dong, Li Wang, K. Xiao, 2022, International Journal of Minerals, Metallurgy and Materials.

Corrosion behavior of L-PBF Ti6Al4V with heat treatments in the F--containing environments

D. Kong, C. Dong, C. Man, 2022, Corrosion Science.

The Correlation Between the Distribution/Size of Carbides and Electrochemical Behavior of 17Cr-1Ni Ferritic-Martensitic Stainless Steel

C. Dong, C. Man, Xiaogang Li, 2018, Metallurgical and Materials Transactions A.

The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values

Wen Li, D. Kong, C. Dong, 2020 .

Long-term monitoring of zinc corrosion behavior in typical hot and dry atmosphere environment in Turpan, China

D. Kong, C. Dong, Jizheng Yao, 2018, Anti-Corrosion Methods and Materials.

Plasma-modified C-doped Co3O4 nanosheets for the oxygen evolution reaction designed by Butler–Volmer and first-principle calculations

C. Dong, Xiaogang Li, Li Wang, 2019, Journal of Materials Chemistry A.

Effect of TiC content on the mechanical and corrosion properties of Inconel 718 alloy fabricated by a high-throughput dual-feed laser metal deposition system

G. Zhu, D. Kong, X. Ni, 2019, Journal of Alloys and Compounds.

Effect of Manufacturing Parameters on the Mechanical and Corrosion Behavior of Selective Laser‐Melted 15‐5PH Stainless Steel

D. Kong, C. Dong, C. Man, 2019, steel research international.

Enhancing the corrosion resistance of selective laser melted 15-5PH martensite stainless steel via heat treatment

D. Kong, C. Dong, C. Man, 2020 .

Heat treatment effects on the metastable microstructure, mechanical property and corrosion behavior of Al-added CoCrFeMnNi alloys fabricated by laser powder bed fusion

D. Shu, G. Zhu, D. Kong, 2022, Journal of Materials Science & Technology.

Machine learning assistance for electrochemical curve simulation of corrosion and its application

C. Dong, Xiaogang Li, Li Wang, 2019, Materials and Corrosion.

Co-enhancing the Mechanical Property and Corrosion Resistance of Selective Laser Melted High-Strength Stainless Steel via Cryogenic Treatment

C. Dong, Xiaogang Li, Li Wang, 2020, Journal of Materials Engineering and Performance.

Influence of pore defects on the mechanical property and corrosion behavior of SLM 18Ni300 maraging steel

D. Kong, X. Ni, C. Dong, 2021, Materials Characterization.

Effects of scanning speeds on the wear behavior of CoCrW alloy fabricated by selective laser melting

D. Kong, X. Ni, C. Dong, 2022, Optics & Laser Technology.

Texture dependence on the mechanical properties of 18Ni300 maraging steel fabricated by laser powder bed fusion

D. Kong, X. Ni, Li Wang, 2022, Materials Characterization.

Anisotropy in α′ martensite and compression behavior of Ti6Al4V prepared by selective laser melting

D. Kong, X. Ni, C. Dong, 2019, Materials Research Express.

Pit growth kinetics of additively manufactured MoNi over-alloyed type 316L stainless steel

D. Kong, X. Ni, Li Wang, 2023, Journal of Materials Research and Technology.