I. Polozov

发表

Synthesis of titanium orthorhombic alloy using binder jetting additive manufacturing

I. Polozov, V. Sufiiarov, A. Shamshurin, 2019, Materials Letters.

In-situ synthesis of Ti2AlNb-based intermetallic alloy by selective laser melting

Vadim Sufiiarov, Igor A. Polozov, Anatoly A. Popovich, 2017 .

Producing hip implants of titanium alloys by additive manufacturing

D. Masaylo, I. Polozov, V. Sufiiarov, 2016 .

Tailoring Microstructure of Selective Laser Melted TiAl-Alloy with In-Situ Heat Treatment via Multiple Laser Exposure

I. Polozov, A. Popovich, V. Popovich, 2021 .

Additive Manufacturing of Ti-48Al-2Cr-2Nb Alloy Using Gas Atomized and Mechanically Alloyed Plasma Spheroidized Powders

I. Goncharov, I. Polozov, A. Popovich, 2020, Materials.

Delft University of Technology Microstructure and mechanical properties of tial-based alloy produced by selective laser melting

I. Polozov, A. Popovich, V. Popovich, 2020 .

Selective Laser Melting of the Intermetallic Titanium Alloy

A. V. Grigoriev, I. Polozov, V. Sufiiarov, 2019, Russian Journal of Non-Ferrous Metals.

A laser ultrasonic technique for studying the properties of products manufactured by additive technologies

D. Masaylo, I. Polozov, V. Sufiiarov, 2016, Russian Journal of Nondestructive Testing.

Microstructure, densification, and mechanical properties of titanium intermetallic alloy manufactured by laser powder bed fusion additive manufacturing with high-temperature preheating using gas atomized and mechanically alloyed plasma spheroidized powders

I. Goncharov, I. Polozov, V. Sufiiarov, 2020 .

Processing, Microstructure, and Mechanical Properties of Laser Additive Manufactured Ti2AlNb-Based Alloy with Carbon, Boron, and Yttrium Microalloying

I. Polozov, A. Popovich, A. Gracheva, 2022, Metals.

Microstructure and Mechanical Properties of NiTi-Based Eutectic Shape Memory Alloy Produced via Selective Laser Melting In-Situ Alloying by Nb

I. Polozov, A. Popovich, 2021, Materials.

Binder jetting additive manufacturing of 420 stainless steel: Densification during sintering and effect of heat treatment on microstructure and hardness

I. Polozov, V. Sufiiarov, Artem Kantykov, 2020 .

A novel approaches to components design additive manufacturing process

D. Masaylo, A. Orlov, I. Polozov, 2018, IOP Conference Series: Earth and Environmental Science.

Synthesis of Ti-5Al, Ti-6Al-7Nb, and Ti-22Al-25Nb alloys from elemental powders using powder-bed fusion additive manufacturing

I. Polozov, V. Sufiiarov, A. Popovich, 2018, Journal of Alloys and Compounds.

Control of structure formation in selective laser melting process

I. Polozov, E. Borisov, V. Sufiyarov, 2018, Tsvetnye Metally.

Evolution of structure and properties of heat-resistant nickel alloy after selective laser melting, hot isostatic pressing and heat treatment

I. Polozov, V. Sufiiarov, A. Popovich, 2017 .

The Effect of Layer Thickness at Selective Laser Melting

D. Masaylo, A. Orlov, I. Polozov, 2017 .

THE INFLUENCE OF THE SELECTIVE LASER MELTING PROCESS PARAMETERS ON THE MICROSTRUCTURE OF NICKEL-BASED SINGLE CRYSTAL ALLOY

I. Polozov, A. Popovich, E. Borisov, 2021, METAL 2021 Conference Proeedings.

Gamma-Titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders

I. Polozov, A. Popovich, V. Popovich, 2020 .

Synthesis of titanium orthorhombic alloy spherical powders by mechanical alloying and plasma spheroidization processes

I. Polozov, A. Popovich, A. Kim, 2019 .

Selective Laser Melting of Ti2AlNb-based intermetallic alloy using elemental powders: Effect of process parameters and post-treatment on microstructure, composition, and properties

I. Polozov, V. Sufiiarov, A. Popovich, 2019, Intermetallics.

Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders

D. Masaylo, I. Polozov, A. Popovich, 2020, Materials.

Microstructure and mechanical properties of additive manufactured copper alloy

Vadim Sufiiarov, Igor A. Polozov, E. V. Borisov, 2016 .

Microstructure and mechanical properties of TiAl-based alloy produced by selective laser melting

I. Polozov, A. Popovich, V. Popovich, 2020, METAL 2020 Conference Proeedings.

Interface Characterization of Bimetallic Ti-6Al-4V/Ti2AlNb Structures Prepared by Selective Laser Melting

I. Polozov, A. Popovich, A. Gracheva, 2022, Materials.

Mitigating Inhomogeneity and Tailoring the Microstructure of Selective Laser Melted Titanium Orthorhombic Alloy by Heat Treatment, Hot Isostatic Pressing, and Multiple Laser Exposures

I. Polozov, V. Sufiiarov, A. Popovich, 2021, Materials.

Formation of a given variable structure in detail by means of selective laser melting technology

I. Polozov, E. Borisov, V. Popovich, 2018 .

Structure and Properties of Ti/Ti64 Graded Material Manufactured by Laser Powder Bed Fusion

I. Polozov, V. Sufiiarov, A. Popovich, 2021, Materials.

Reaction sintering of metal-ceramic AlSi-Al2O3 composites manufactured by binder jetting additive manufacturing process

I. Polozov, V. Sufiiarov, Artem Kantyukov, 2020, METAL 2020 Conference Proeedings.

Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by SLM

I. Polozov, V. Sufiiarov, A. Popovich, 2015 .

Use of Additive Techniques for Preparing Individual Components of Titanium Alloy Joint Endoprostheses

A. A. Sharonov, Igor A. Polozov, R. M. Tikhilov, 2016, BioMed 2016.

Selective laser melting of copper alloy

I. Polozov, V. Sufiiarov, A. Popovich, 2020 .

Microstructure and Mechanical Properties of Inconel 718 Produced by SLM and Subsequent Heat Treatment

I. Polozov, V. Sufiiarov, A. Popovich, 2015 .

Numerical simulation of the inelastic behavior of a structurally graded material

D. Masaylo, A. Orlov, I. Polozov, 2019, Letters on Materials.

Formation of Structure in Titanium Lightweight Structures Made by Selective Laser Melting

A. Orlov, I. Polozov, V. Sufiiarov, 2019, Materials Science Forum.

Erratum: Polozov, I., et al. Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders. Materials 2020, 13, 1766

D. Masaylo, I. Polozov, A. Popovich, 2020, Materials.

Decentralized Management System for Solid-State Voltage Regulators in Nodes of Distribution Power Networks

Elena Sosnina, Ivan Lipuzhin, Igor Polozov, 2021 .

Investigation of Ti-6Al-4V Alloy In Situ Manufactured Using Selective Laser Melting from Elemental Powder Mixture

I. Polozov, V. Sufiiarov, A. Popovich, 2020 .

Selective Laser Melting of the Inconel 718 Nickel Superalloy

Vadim Sufiiarov, Evgenii Borisov, Igor A. Polozov, 2014 .

Additive Manufacturing of Ni36Co37Al27 Ferromagnetic Shape Memory Material Using Mechanically Alloyed Plasma Spheroidized Powders

I. Polozov, A. Popovich, A. Kim, 2021, METAL 2021 Conference Proeedings.

Anisotropy of mechanical properties of products manufactured using selective laser melting of powdered materials

A. V. Grigoriev, D. Masaylo, I. Polozov, 2017, Russian Journal of Non-Ferrous Metals.