Deqiao Xie

发表

Distortion of Thin-Walled Structure Fabricated by Selective Laser Melting Based on Assumption of Constraining Force-Induced Distortion

W. Yue, Tao Yang, Deqiao Xie, 2019 .

Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing.

Guanjun Wang, Jianfeng Zhao, Lida Shen, 2018, ACS biomaterials science & engineering.

Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility

Lan Li, Qing Jiang, You-wen Yang, 2019, Journal of Materials Science & Technology.

Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2020 .

Research on laser-assisted selective metallization of a 3D printed ceramic surface

Mingbo Qiu, Deqiao Xie, Lida Shen, 2020, RSC advances.

Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment

Deqiao Xie, Lida Shen, Changjiang Wang, 2019, Optik.

Cause of Angular Distortion in Fusion Welding: Asymmetric Cross-Sectional Profile along Thickness

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, Materials.

Preparation of Al2O3-ZrO2 scaffolds with controllable multi-level pores via digital light processing

Deqiao Xie, Lida Shen, Changjiang Wang, 2020 .

Mg bone implant: Features, developments and perspectives

C. Shuai, You-wen Yang, S. Peng, 2020 .

Selective laser melted Fe-Mn bone scaffold: microstructure, corrosion behavior and cell response

C. Shuai, You-wen Yang, Deqiao Xie, 2020, Materials Research Express.

The Size Effect on Forming Quality of Ti–6Al–4V Solid Struts Fabricated via Laser Powder Bed Fusion

Jianping Shi, Deqiao Xie, Lida Shen, 2019, Metals.

Preparation and Properties of Functional Materials Based on Digital Light Processing 3D Printing

Deqiao Xie, Lida Shen, Z. Tian, 2022, Journal of Nanomaterials.

An Adenovirus‐Mimicking Photoactive Nanomachine Preferentially Invades and Destroys Cancer Cells through Hijacking Cellular Glucose Metabolism

Deqiao Xie, Lida Shen, Xinghai Ning, 2021, Advanced Functional Materials.

Selective metallization on additive manufactured polymer for fabrication of integrated device

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2022, Journal of Materials Science.

A Review on Distortion and Residual Stress in Additive Manufacturing

C. Shuai, You-wen Yang, Deqiao Xie, 2022, Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers.

DLP-Based 3D Printing for Automated Precision Manufacturing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2022, Mobile Information Systems.

Analysis of Mechanical Properties and Permeability of Trabecular-Like Porous Scaffold by Additive Manufacturing

Deqiao Xie, Lida Shen, Huixin Liang, 2021, Frontiers in Bioengineering and Biotechnology.

Laser Additive Manufacturing of Zinc Targeting for Biomedical Application

You-wen Yang, Deqiao Xie, Lida Shen, 2022, International journal of bioprinting.

Microstructure and Fatigue Performance of Ti6Al4V Produced by Laser Powder Bed Fusion after Post-Heat Treatment

Deqiao Xie, Lida Shen, Yangdong He, 2023, Applied Sciences.

Additive Manufacturing of Bio-Inspired Ceramic Bone Scaffolds: Structural Design, Mechanical Properties and Biocompatibility

You-wen Yang, Deqiao Xie, Lida Shen, 2022, SSRN Electronic Journal.

Mechanical properties and biocompatibility of MgO / Ca3(PO4)2 composite ceramic scaffold with high MgO content based on digital light processing

You-wen Yang, Deqiao Xie, Lida Shen, 2022, Ceramics International.

Microstructure development and biodegradation behavior of additively manufactured Mg-Zn-Gd alloy with LPSO structure

C. Shuai, You-wen Yang, S. Peng, 2022, Journal of Materials Science & Technology.

Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility

Deqiao Xie, Lida Shen, Changjiang Wang, 2019, Ceramics International.

Mechanical Properties of In-Situ Synthesis of Ti-Ti3Al Metal Composite Prepared by Selective Laser Melting

You-wen Yang, Deqiao Xie, Lida Shen, 2019, Metals.

Laser damage resistance of plasma-sprayed alumina and honeycomb skeleton/alumina composite ceramic coatings

Deqiao Xie, Lida Shen, Z. Tian, 2021, Ceramics International.

Decreasing pores in a laser cladding layer with pulsed current

Jianfeng Zhao, Lida Shen, Deqiao Xie, 2013 .

Laser additive manufacturing of magnesium alloys and its biomedical applications

C. Shuai, You-wen Yang, Deqiao Xie, 2022, Materials Science in Additive Manufacturing.

Study on defect-free debinding green body of ceramic formed by DLP technology

Deqiao Xie, Lida Shen, Changjiang Wang, 2020 .

On the role of laser in situ re-melting into pore elimination of Ti–6Al–4V components fabricated by selective laser melting

Deqiao Xie, Lida Shen, Changjiang Wang, 2021 .

Effect of higher laser power remelting on porosity and mechanical performance of part built by laser powder bed fusion

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2023, The International Journal of Advanced Manufacturing Technology.

Additive Manufacturing of Stretchable Multi-Walled Carbon Nanotubes/Thermoplastic Polyurethanes Conducting Polymers for Strain Sensing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2022, 3D Printing and Additive Manufacturing.

Parameter Optimization of T800 Coating Fabricated by Ehla Based on Response Surface Methodology

Deqiao Xie, Lida Shen, Z. Tian, 2023, SSRN Electronic Journal.

Validation of Cr6Fe18Mo in tribaloy T-800 coating fabricated by induction heating assisted laser cladding

Yang Liu, Z. Yong, Deqiao Xie, 2023, Journal of Alloys and Compounds.

Influence of Island Scanning Strategy on Microstructures and Mechanical Properties of Direct Laser-Deposited Ti–6Al–4V Structures

Deqiao Xie, Lida Shen, Z. Tian, 2018, Acta Metallurgica Sinica (English Letters).

Experimental investigation and parameters optimization on jet electrochemical machining to improve the surface performance of additive-manufactured 316L stainless steel parts

You-wen Yang, Deqiao Xie, Lida Shen, 2021, Surface Topography Metrology and Properties.

Magnetoelectric effect in FeCo/PMN-PT/FeCo trilayers prepared by electroless deposition of FeCo on PMN-PT crystals with various orientations

Deqiao Xie, Honglie Shen, Jian Cheng, 2014 .

Additive Manufacturing of Monolithic Microwave Dielectric Ceramic Filters via Digital Light Processing

Wang, Ye, Jianfeng Zhao, 2019, Electronics.

Assumption of Constraining Force to Explain Distortion in Laser Additive Manufacturing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, Materials.

Evaluation of Compressive and Permeability Behaviors of Trabecular-Like Porous Structure with Mixed Porosity Based on Mechanical Topology

Deqiao Xie, Lida Shen, Z. Tian, 2023, Journal of functional biomaterials.

Additive Manufacturing of Stretchable Polyurethane/Graphene/Multiwalled Carbon Nanotube-Based Conducting Polymers for Strain Sensing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2023, ACS Applied Nano Materials.

3D printing of flexible strain sensor based on MWCNTs/flexible resin composite

Deqiao Xie, Lida Shen, Z. Tian, 2022, Nanotechnology.

Improved mechanical properties of laser-repaired 15-5PH stainless steel by in-situ heat treatment and grain refinement

Deqiao Xie, Jianfeng Zhao, Honglin Wang, 2022, Optics & Laser Technology.

Improvement of selective laser melting substrate surface performance via combined processing of jet electrochemical machining and jet electrodeposition

You-wen Yang, Deqiao Xie, Lida Shen, 2021 .

Design and Compressive Fatigue Properties of Irregular Porous Scaffolds for Orthopedics Fabricated Using Selective Laser Melting.

You-wen Yang, Deqiao Xie, Lida Shen, 2021, ACS biomaterials science & engineering.

Experimental study of the core role of GFRP and LDPE on the collapse behavior of absorbers printed with PLA and ABS

Deqiao Xie, Lida Shen, Z. Tian, 2022, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

Adsorption of Ru2O4 on Fe, Ni, Co, and Cu-doped MoS2 monolayer and effect of applied electric field: A DFT study

Deqiao Xie, Lida Shen, Weiping Deng, 2022, Chemical Physics Letters.

High Temperature Oxidation Behavior of HfH_2-CoCrAlYSi Coating Fabricated by Laser Cladding

Z. Yong, Deqiao Xie, Lida Shen, 2023, Journal of Materials Engineering and Performance.

Finite element analysis of mechanical behavior, permeability of irregular porous scaffolds and lattice-based porous scaffolds

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2019, Materials Research Express.

Compressive strength and impact resistance of Al2O3/Al composite structures fabricated by digital light processing

You-wen Yang, Deqiao Xie, Lida Shen, 2022, Ceramics International.

Sintering densification mechanism and mechanical properties of the 3D-printed high-melting-point-difference magnesium oxide/calcium phosphate composite bio-ceramic scaffold.

You-wen Yang, Deqiao Xie, Z. Tian, 2023, Journal of The Mechanical Behavior of Biomedical Materials.

Towards a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force

C. Shuai, Deqiao Xie, Lida Shen, 2021, Virtual and Physical Prototyping.

Intelligent geometry compensation for additive manufactured oral maxillary stent by genetic algorithm and backpropagation network

R. Liu, Deqiao Xie, Lida Shen, 2023, Comput. Biol. Medicine.

Comprehension of overhanging structure distortion via selective laser melting based on theory of constraining force induced distortion

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2020, 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST).

Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing.

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, ACS biomaterials science & engineering.

Stress and deformation evaluation of the subarea scanning effect in direct laser-deposited Ti-6Al-4V

Lida Shen, Deqiao Xie, Huixin Liang, 2018 .

Evolutions of distortion and residual stress in laser powder bed fusion based on assumption of constraining force

Deqiao Xie, Jianfeng Zhao, 2024, Journal of Laser Applications.

Microstructure development of AM-fabricated pure Zn with heat-treatment and its mechanical properties, degradation behavior, and biocompatibility

Deqiao Xie, Huixin Liang, Long Chao, 2024, Journal of Materials Research and Technology.

Design of porous structure based on the Voronoi diagram and stress line for better stress shielding relief and permeability

Deqiao Xie, Lida Shen, Yangdong He, 2023, Journal of Materials Research and Technology.

Effect of WC on the microstructure and mechanical properties of laser-clad AlCoCrFeNi2.1 eutectic high-entropy alloy composite coatings

Deqiao Xie, Fei Lv, Chen Jiao, 2023, Journal of Alloys and Compounds.

Biocompatibility and antibacterial activity of MgO/Ca3(PO4)2 composite ceramic scaffold based on vat photopolymerization technology.

Deqiao Xie, Huixin Liang, Mengxing Ge, 2023, Biomaterials advances.