Jianfeng Zhao

发表

Distortion of Thin-Walled Structure Fabricated by Selective Laser Melting Based on Assumption of Constraining Force-Induced Distortion

W. Yue, Tao Yang, Deqiao Xie, 2019 .

Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing.

Guanjun Wang, Jianfeng Zhao, Lida Shen, 2018, ACS biomaterials science & engineering.

Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2020 .

Superhydrophobic nickel coatings fabricated by scanning electrodeposition on stainless steel formed by selective laser melting

Dachuan Liu, Lida Shen, Jianfeng Zhao, 2019, Surface and Coatings Technology.

Cause of Angular Distortion in Fusion Welding: Asymmetric Cross-Sectional Profile along Thickness

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, Materials.

Selective metallization on additive manufactured polymer for fabrication of integrated device

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2022, Journal of Materials Science.

Tunable wettability of jet electrodeposited micro-nano structures modified by laser radiation

You-wen Yang, Lida Shen, Jianfeng Zhao, 2022, Surface and Coatings Technology.

A Review on Distortion and Residual Stress in Additive Manufacturing

C. Shuai, You-wen Yang, Deqiao Xie, 2022, Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers.

DLP-Based 3D Printing for Automated Precision Manufacturing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2022, Mobile Information Systems.

Design and 3D printing of integrated bionic porous ceramic maxillofacial prosthesis

Haidong Wu, Lida Shen, Jianfeng Zhao, 2022, Journal of Materials Science.

Decreasing pores in a laser cladding layer with pulsed current

Jianfeng Zhao, Lida Shen, Deqiao Xie, 2013 .

Design and 3d Printing of Ceramic Maxillofacial Prosthesis with Gradient Pores Based on Voronoi-Tessellation Principle

Haidong Wu, Lida Shen, Jianfeng Zhao, 2022, SSRN Electronic Journal.

Effect of higher laser power remelting on porosity and mechanical performance of part built by laser powder bed fusion

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2023, The International Journal of Advanced Manufacturing Technology.

Additive Manufacturing of Stretchable Multi-Walled Carbon Nanotubes/Thermoplastic Polyurethanes Conducting Polymers for Strain Sensing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2022, 3D Printing and Additive Manufacturing.

High-performance nickel coating on SLM 316L stainless steel processed by jet electrochemical machining and jet electrodeposition

You-wen Yang, Lida Shen, Jianfeng Zhao, 2021, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

Experimental investigation and parameters optimization on jet electrochemical machining to improve the surface performance of additive-manufactured 316L stainless steel parts

You-wen Yang, Deqiao Xie, Lida Shen, 2021, Surface Topography: Metrology and Properties.

Additive Manufacturing of Monolithic Microwave Dielectric Ceramic Filters via Digital Light Processing

Wang, Ye, Jianfeng Zhao, 2019, Electronics.

Study on the properties of superhydrophobic coating prepared by scanning electrodeposition on SLM substrate

Lida Shen, Jianfeng Zhao, Wei Jiang, 2019, Materials Research Express.

Assumption of Constraining Force to Explain Distortion in Laser Additive Manufacturing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, Materials.

Additive Manufacturing of Stretchable Polyurethane/Graphene/Multiwalled Carbon Nanotube-Based Conducting Polymers for Strain Sensing

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2023, ACS Applied Nano Materials.

Improved mechanical properties of laser-repaired 15-5PH stainless steel by in-situ heat treatment and grain refinement

Deqiao Xie, Jianfeng Zhao, Honglin Wang, 2022, Optics & Laser Technology.

Improvement of selective laser melting substrate surface performance via combined processing of jet electrochemical machining and jet electrodeposition

You-wen Yang, Deqiao Xie, Lida Shen, 2021 .

Finite element analysis of mechanical behavior, permeability of irregular porous scaffolds and lattice-based porous scaffolds

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2019, Materials Research Express.

Compressive strength and impact resistance of Al2O3/Al composite structures fabricated by digital light processing

You-wen Yang, Deqiao Xie, Lida Shen, 2022, Ceramics International.

Towards a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force

C. Shuai, Deqiao Xie, Lida Shen, 2021 .

Analysis of the wear characteristics of an EDM electrode made by selective laser sintering

Jianfeng Zhao, Jianfeng Zhao, You Zhang, 2003 .

Comprehension of overhanging structure distortion via selective laser melting based on theory of constraining force induced distortion

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2020, 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST).

Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing.

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, ACS biomaterials science & engineering.

3D printed barium titanate/calcium silicate composite biological scaffold combined with structural and material properties.

Jianfeng Zhao, Huixin Liang, Mengxing Ge, 2024, Biomaterials advances.

Evolutions of distortion and residual stress in laser powder bed fusion based on assumption of constraining force

Deqiao Xie, Jianfeng Zhao, 2024, Journal of Laser Applications.