A. Khoei

R. Lewis, D. Gethin, A. Khoei, 1999, Proceedings of the Second International Conference on Intelligent Processing and Manufacturing of Materials. IPMM'99 (Cat. No.99EX296).

3D numerical simulation of elasto-plastic behaviour in powder compaction process using a quasi-nonlinear technique

A. Khoei, S. Iranfar, 2003 .

An endochronic plasticity model for numerical simulation of industrial powder compaction processes

A. Khoei, M. Mofid, A. Bakhshiani, 2003 .

Modelling of powder compaction process using an endochronic plasticity model

A. Khoei, M. Mofid, M. Mofid, 2002 .

Multiscale modeling of coupled thermo-hydro-mechanical analysis of heterogeneous porous media

A. Khoei, S. Saeedmonir, 2022, Computer Methods in Applied Mechanics and Engineering.

Studies of frictional sliding contact by molecular dynamics assisted continuum mechanics

A. Khoei, S. Xiao, J. Zakeri, 2022, Mechanics of Advanced Materials and Structures.

Temperature-dependent multiscale modeling of graphene sheet under finite deformation

A. Khoei, M. Jahanshahi, A. Tanhadoust, 2022, Diamond and Related Materials.

A hierarchical thermo-mechanical multi-scale technique for modeling of edge dislocations in nano-crystalline structures

A. Khoei, M. Jahanshahi, N. Heidarzadeh, 2018 .

Application of an enriched FEM technique in thermo-mechanical contact problems

A. Khoei, B. Bahmani, 2018, Computational Mechanics.

Computational homogenization of fully coupled hydro-mechanical analysis of micro-fractured porous media

A. Khoei, S. Saeedmonir, Amin Misaghi Bonabi, 2023, Computers and Geotechnics.

A numerical contact algorithm in saturated porous media with the extended finite element method

A. Khoei, M. Vahab, 2014, Computational Mechanics.

An extended finite element method for fluid flow in partially saturated porous media with weak discontinuities; the convergence analysis of local enrichment strategies

A. Khoei, T. Mohammadnejad, 2012, Computational Mechanics.

Error estimation, adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization

Amir R. Khoei, A. R. Tabarraie, A. Khoei, 2007 .

A hypoelasto-viscoplastic endochronic model for numerical simulation of shear band localization

A. Khoei, A. Bakhshiani, 2005 .

H-adaptive mesh refinement for shear band localization in elasto-plasticity Cosserat continuum

Amir R. Khoei, A. R. Tabarraie, A. Khoei, 2005 .

Polygonal finite element methods for contact-impact problems on non-conformal meshes

Peter Wriggers, Amir R. Khoei, S.O.R. Biabanaki, 2014 .

Compaction simulation of crystalline nano-powders under cold compaction process with molecular dynamics analysis

A. Khoei, A. R. Sameti, H. Mofatteh, 2020 .

3D finite element modeling of shear band localization via the micro-polar Cosserat continuum theory

A. Khoei, S. Biabanaki, S. Yadegari, 2010 .

Design optimisation of aluminium recycling processes using Taguchi technique

Ian Masters, Amir R. Khoei, David T. Gethin, 2002 .

Genetic algorithm-based numerical optimization of powder compaction process with temperature-dependent cap plasticity model

Amir R. Khoei, A. Khoei, Shahriyar Keshavarz, 2013 .

Computational modeling of 3D powder compaction processes

Amir R. Khoei, A. R. Azami, S. Azizi, 2007 .

3D computational modeling of powder compaction processes using a three-invariant hardening cap plasticity model

Amir R. Khoei, A. R. Azami, A. Khoei, 2006 .

Powder compaction modelling via the discrete and finite element method

Roland W. Lewis, Amir R. Khoei, David T. Gethin, 2000 .

Mechanical behavior of multilayer graphene reinforced epoxy nano-composites via a hierarchical multi-scale technique

S. Bordas, A. Khoei, H. Ahmadi, 2021, Carbon Trends.

An extended finite element method for fluid flow in partially saturated porous media with weak discontinuities; the convergence analysis of local enrichment strategies

Amir R. Khoei, T. Mohammadnejad, A. Khoei, 2013 .

A Lagrangian-extended finite-element method in modeling large-plasticity deformations and contact problems

Amir R. Khoei, S.O.R. Biabanaki, M. Anahid, 2009 .

New development in extended finite element modeling of large elasto‐plastic deformations

Amir R. Khoei, M. Anahid, A. Khoei, 2008 .

Atomistic simulation of creep deformation mechanisms in nickel-based single crystal superalloys

A. Khoei, G. T. Eshlaghi, S. Shahoveisi, 2021 .

Modeling non‐isothermal two‐phase fluid flow with phase change in deformable fractured porous media using extended finite element method

A. Khoei, S. Mortazavi, Daniel Amini, 2021, International Journal for Numerical Methods in Engineering.

On the implementation of a multi-surface kinematic hardening plasticity and its applications

Amir R. Khoei, A. Khoei, N. Jamali, 2005 .

A machine learning-based atomistic-continuum multiscale technique for modeling the mechanical behavior of Ni3Al

A. Khoei, M. Kianezhad, 2022, International Journal of Mechanical Sciences.

Modeling the interaction between fluid-driven fracture and natural fault using an enriched-FEM technique

Amir R. Khoei, M. Vahab, M. Hirmand, 2015, International Journal of Fracture.

Modeling of crack propagation via an automatic adaptive mesh refinement based on modified superconvergent patch recovery technique

Amir R. Khoei, H. Moslemi, H. Azadi, 2008 .

Modeling of reactive acid transport in fractured porous media with the Extended–FEM based on Darcy-Brinkman-Forchheimer framework

A. Khoei, N. Hosseini, A. S. Sichani, 2020 .

Numerical simulation of cold and hot water injection into naturally fractured porous media using the extended–FEM and an equivalent continuum model

A. Khoei, S. Mortazavi, Pouriya Pirmoradi, 2021, International Journal for Numerical and Analytical Methods in Geomechanics.

General framework for dynamic large deformation contact problems based on phantom-node X-FEM

Amir R. Khoei, A. Khoei, P. Broumand, 2018 .

General framework for dynamic large deformation contact problems based on phantom-node X-FEM

A. Khoei, P. Broumand, 2017, Computational Mechanics.

Extended finite element method for three-dimensional large plasticity deformations on arbitrary interfaces

Amir R. Khoei, S.O.R. Biabanaki, M. Anahid, 2008 .

Crack growth modeling via 3D automatic adaptive mesh refinement based on modified-SPR technique

Amir R. Khoei, M. Eghbalian, H. Moslemi, 2013 .

An augmented Lagrangian contact formulation for frictional discontinuities with the extended finite element method

Amir R. Khoei, M. Vahab, M. Hirmand, 2015 .

Extended finite element method in plasticity forming of powder compaction with contact friction

Amir R. Khoei, Amir Shamloo, A. R. Azami, 2006 .

Thermo-hydro-mechanical modeling of impermeable discontinuity in saturated porous media with X-FEM technique

Amir R. Khoei, E. Haghighat, A. Khoei, 2012 .

A hypoelasto-plastic finite strain simulation of powder compaction processes with density-dependent endochronic model

Amir R. Khoei, A. Khoei, A. Bakhshiani, 2004 .

An endochronic plasticity model for finite strain deformation of powder forming processes

Massood Mofid, Amir R. Khoei, A. Khoei, 2003 .

An implicit algorithm for hypoelasto-plastic and hypoelasto-viscoplastic endochronic theory in finite strain isotropic–kinematic-hardening model

A. Khoei, M. Mofid, A. Bakhshiani, 2003 .

A polygonal finite element method for modeling arbitrary interfaces in large deformation problems

Amir R. Khoei, S.O.R. Biabanaki, A. Khoei, 2012 .

A polygonal finite element method for modeling arbitrary interfaces in large deformation problems

A. Khoei, S. Biabanaki, 2011, Computational Mechanics.

Multi‐scale modeling of plastic deformations in nano‐scale materials; Transition to plastic limit

A. Khoei, M. Jahanshahi, 2017 .

A density-dependent endochronic plasticity for powder compaction processes

A. Khoei, M. Mofid, A. Bakhshiani, 2004 .

Finite strain simulation of thin-walled tube under torsion using endochronic theory of plasticity

A. Khoei, M. Mofid, S. Mccabe, 2003 .

Finite strain endochronic plasticity with reference to metal tube under torsion

A. Khoei, M. Mofid, A. Bakhshiani, 2003 .

Numerical simulation of cyclic behavior of ductile metals with a coupled damage–viscoplasticity model

A. Khoei, M. Eghbalian, 2012 .

Genetic algorithm-based numerical optimization of powder compaction process with temperature-dependent cap plasticity model

A. Khoei, Shahriyar Keshavarz, Z. Molaeinia, 2012, The International Journal of Advanced Manufacturing Technology.

Modeling of hot isostatic pressing of metal powder with temperature–dependent cap plasticity model

A. Khoei, Shahriyar Keshavarz, Z. Molaeinia, 2012, International Journal of Material Forming.

An endochronic plasticity model for powder compaction processes

A. Khoei, M. Mofid, A. Bakhshiani, 2002 .

Numerical simulation of multiple crack growth in brittle materials with adaptive remeshing

Amir R. Khoei, H. Azadi, A. Khoei, 2011 .

Computational homogenization of fully coupled multiphase flow in deformable porous media

A. Khoei, S. Saeedmonir, 2021 .

A bridge between dual porosity and multiscale models of heterogeneous deformable porous media

A. Khoei, M. R. Hajiabadi, 2018, International Journal for Numerical and Analytical Methods in Geomechanics.

Fully coupled hydromechanical multiscale model with microdynamic effects

A. Khoei, M. R. Hajiabadi, 2018 .

An X–FEM Technique for Modeling the FRP Strengthening of Concrete Arches with a Plastic–Damage Model; Numerical and Experimental Investigations

A. Khoei, Y. Navidtehrani, T. Ahmadpour, 2021, European Journal of Computational Mechanics.

A computational plastic–damage method for modeling the FRP strengthening of concrete arches

T. Ahmadpour, Y. Navid Tehrani, A. R. Khoei, 2019, Scientia Iranica.

The extended finite element method for large deformation ductile fracture problems with a non-local damage-plasticity model

Amir R. Khoei, A. Khoei, P. Broumand, 2013 .

An enriched FEM technique for modeling hydraulically driven cohesive fracture propagation in impermeable media with frictional natural faults: Numerical and experimental investigations

Amir R. Khoei, M. Vahab, M. Hirmand, 2015 .

Extended finite element modeling of deformable porous media with arbitrary interfaces

Amir R. Khoei, E. Haghighat, A. Khoei, 2011 .

Numerical modeling of multiphase fluid flow in deforming porous media: A comparison between two- and three-phase models for seismic analysis of earth and rockfill dams

Amir R. Khoei, T. Mohammadnejad, A. Khoei, 2011 .

Finite Element Modeling of Cohesive Fracture Formation in Saturated Porous Media

A. Khoei, M. Mofid, O. R. Baranilonbani, 2014 .

Three-dimensional data transfer operators in large plasticity deformations using modified-SPR technique

Amir R. Khoei, A. Khoei, S. A. Gharehbaghi, 2009 .

Three-dimensional superconvergent patch recovery method and its application to data transferring in small-strain plasticity

Amir R. Khoei, A. Khoei, S. A. Gharehbaghi, 2007 .

The superconvergence patch recovery technique and data transfer operators in 3D plasticity problems

Amir R. Khoei, A. Khoei, S. A. Gharehbaghi, 2007 .

A coupling atomistic–continuum approach for modeling mechanical behavior of nano-crystalline structures

A. Khoei, H. DorMohammadi, A. Aramoon, 2014 .

A temperature-related boundary Cauchy–Born method for multi-scale modeling of silicon nano-structures

A. Khoei, H. DorMohammadi, A. Aramoon, 2014 .

Multi‐scale modeling of surface effects in nano‐materials with temperature‐related Cauchy‐Born hypothesis via the modified boundary Cauchy‐Born model

Amir R. Khoei, Pegah Ghahremani, H. DorMohammadi, 2014 .

A multi-scale modeling of surface effect via the modified boundary Cauchy-Born model.

A. Khoei, A R Khoei, A Aramoon, 2012, Materials science & engineering. C, Materials for biological applications.

A multiscale framework for atomistic–continuum transition in nano-powder compaction process using a cap plasticity model

A. Khoei, A. R. Sameti, H. Mofatteh, 2023, International Journal of Mechanical Sciences.

Multiscale analysis of nano-powder compaction process using the FEM–MD technique

A. Khoei, A. R. Sameti, H. Mofatteh, 2023, Powder Technology.

An atomistic–continuum multiscale analysis for heterogeneous nanomaterials and its application in nanoporous gold foams

A. Khoei, A. R. Sameti, Yousef Nikravesh, 2022, Applied Mathematical Modelling.

A continuum–atomistic multi-scale analysis of temperature field problems and its application in phononic nano-structures

R. Yasbolaghi, A. Khoei, 2022, Finite Elements in Analysis and Design.

Local density variation of gold nanoparticles in aquatic environments

A. Khoei, R. Shahsavari, F. Hosseinzadeh, 2016 .

A coarse-grained – Atomistic multi-scale method to study the mechanical behavior of heterogeneous FCC nano-materials

A. Khoei, A. Madadi, 2021 .

Validity of Cauchy–Born hypothesis in multi-scale modeling of plastic deformations

A. Khoei, M. Jahanshahi, G. Toloui, 2017 .

A concurrent multi-scale technique in modeling heterogeneous FCC nano-crystalline structures

A. Khoei, A. Aramoon, F. Jahanbakhshi, 2015 .

Temperature-dependent multi-scale modeling of surface effects on nano-materials

Amir R. Khoei, Pegah Ghahremani, Pegah Ghahremani, 2012 .

Multi‐scale modeling of surface effect via the boundary Cauchy–Born method

Amir R. Khoei, Amin Aghaei, A. Khoei, 2011 .

Stability and size-dependency of Cauchy–Born hypothesis in three-dimensional applications

Mohammad Taghi Kazemi, Amir R. Khoei, Amin Aghaei, 2009 .

An investigation on the validity of Cauchy–Born hypothesis using Sutton-Chen many-body potential

Mohammad Taghi Kazemi, Amir R. Khoei, Amin Aghaei, 2009 .

Historical Data Analysis in Quality Improvement of Aluminum Recycling Process

Ian Masters, Amir R. Khoei, David T. Gethin, 2013 .

Effect of defects on the local shell buckling and post-buckling behavior of single and multi-walled carbon nanotubes

A. Khoei, S. Mohammadi, M. Eftekhari, 2013 .

H-adaptive finite element analysis for localization phenomena with reference to metal powder forming

R. Lewis, A. Khoei, 2002 .

Numerical analysis of strain localization in metal powder‐forming processes

R. Lewis, A. Khoei, 2001 .

Application of the finite element method for localized failure analysis in dynamic loading

O. C. Zienkiewicz, R. Lewis, A. Khoei, 1997 .

A PLASTICITY MODEL FOR POWDER COMPACTION PROCESSES

A. Khoei, M. Mofid, A. Bakhshiani, 2004 .

3D dynamic modeling of powder forming processes via a simple and efficient node-to-surface contact algorithm

Amir R. Khoei, S.O.R. Biabanaki, S. M. Parvaneh, 2013 .

Modeling anisotropic mechanical properties and creep behavior of Ni($$\gamma$$)/Ni3Al($$\gamma'$$) single crystal superalloys at high temperatures

A. Khoei, G. Tolooei Eshlaghi, 2023, Journal of Nanoparticle Research.

X-FEM modeling of large plasticity deformation; a convergence study on various blending strategies for weak discontinuities

Amir R. Khoei, M. Vahab, H. Ehsani, 2015 .

Modeling of pressure-sensitive materials using a cap plasticity theory in extended finite element method

Amir R. Khoei, Amir Shamloo, A. R. Azami, 2005 .

An X-FEM technique for numerical simulation of variable-density flow in fractured porous media.

A. Khoei, N. Hosseini, S. M. Mousavi, 2023, MethodsX.

A numerical contact algorithm in saturated porous media with the extended finite element method

Amir R. Khoei, M. Vahab, A. Khoei, 2014 .

Adaptive refinement in the meshless finite volume method for elasticity problems

M. Ebrahimnejad, Nosrat-Allah Fallah, A. R. Khoei, 2015, Comput. Math. Appl..

Effects of temperature and torsion speed on torsional properties of single-walled carbon nanotubes

Amir R. Khoei, Ehsan Ban, A. Khoei, 2011 .

A coupling atomistic–continuum approach for modeling mechanical behavior of nano-crystalline structures

A. Khoei, H. DorMohammadi, A. Aramoon, 2014, Computational Mechanics.

Modeling enhanced geothermal systems using a hybrid XFEM–ECM technique

A. Khoei, S. Mortazavi, O. Rezaie Beydokhti, 2023, Applied Thermal Engineering.

Implementation of the eXtended Finite Element Method (X‐FEM) in Frictional Contact Problems

Amir R. Khoei, M. Nikbakht, I. Yadegaran, 2007 .

The extended finite element method (X-FEM) for powder forming problems

Amir R. Khoei, Amir Shamloo, M. Anahid, 2006 .

Modelling of Powder Forming Processes in Transient-Dynamic Analysis of Large Plastic Deformations

A. Khoei, S. Biabanaki, S. Parvaneh, 2012 .

Application of a failure analysis to powder forming processes

A. Khoei, 2003 .

A three‐invariant hardening plasticity for numerical simulation of powder forming processes via the arbitrary Lagrangian–Eulerian FE model

R. Lewis, A. Khoei, M. Anahid, 2006 .

Adaptive finite element remeshing in a large deformation analysis of metal powder forming

Roland W. Lewis, Amir R. Khoei, R. Lewis, 1999 .

Contact friction simulation in powder compaction process based on the penalty approach

A. Khoei, Shahriyar Keshavarz, A. Khaloo, 2008 .

Optimal design of powder compaction processes via genetic algorithm technique

Amir R. Khoei, Sh. Keshavarz, S.O.R. Biabanaki, 2010 .

A new computational algorithm for contact friction modeling of large plastic deformation in powder compaction processes

A. Khoei, S. Biabanaki, A. Vafa, 2009 .

Validity and size-dependency of Cauchy―Born hypothesis with Tersoff potential in silicon nano-structures

A. Khoei, H. DorMohammadi, 2012 .

A hierarchical hyperelastic-based approach for multi-scale analysis of defective nano-materials

A. Khoei, M. Jahanshahi, H. Ahmadi, 2020 .

Modeling Fluid Flow in Fractured Porous Media with the Interfacial Conditions Between Porous Medium and Fracture

A. Khoei, N. Hosseini, 2021, Transport in Porous Media.

6 – ERROR ESTIMATION AND ADAPTIVITY

Amir R. Khoei, A. Khoei, 2005 .

Compaction simulation of nano-crystalline metals with molecular dynamics analysis

A. Khoei, A. R. Sameti, H. Mofatteh, 2016 .

An integrated software environment for finite element simulation of powder compaction processes

Amir R. Khoei, A. Khoei, 2002 .

A single cone-cap plasticity with an isotropic hardening rule for powder materials

Amir R. Khoei, A. R. Azami, A. Khoei, 2005 .

Mechanical Properties And γ/γ' Interfacial Misfit Network Evolution: A Study Towards the Creep Behavior of Ni-Based Single Crystal Superalloys

A. Khoei, Mehrdad Youzi, G. Tolooei Eshlaghi, 2021 .

An Extended-FEM Model for CO2 Leakage Through a Naturally Fractured Cap-Rock During Carbon Dioxide Sequestration

A. Khoei, N. Hosseini, R. Ehsani, 2022, Transport in Porous Media.

Irregular and stepwise behaviour of hydraulic fracturing: insights from linear cohesive crack modelling with maximum stress criterion

B. Schrefler, L. Simoni, A. Khoei, 2023, Computers and Geotechnics.

FE MODELLING OF MECHANICAL INTERACTION OF LUGGED FRP RODS WITH CONCRETE, COMPARISON BETWEEN EXPERIMENT AND SIMULATION

A. Khoei, H. Irannejad, 2004 .

An efficient stress recovery technique in adaptive finite element method using artificial neural network

Amir R. Khoei, H. Moslemi, M. R. Seddighian, 2020 .

A coarse-graining approach for modeling nonlinear mechanical behavior of FCC nano-crystals

A. Khoei, M. Jahanshahi, M. Vokhshoori, 2020 .

Machine learning-based multiscale framework for mechanical behavior of nano-crystalline structures

M. R. Seddighian, A. Khoei, A. R. Sameti, 2023, International Journal of Mechanical Sciences.

Numerical simulation of ductile crack growth under cyclic and dynamic loading with a damage–viscoplasticity model

A. Khoei, M. Eghbalian, H. Azadi, 2013 .

Numerical simulation of cyclic behavior of ductile metals with a coupled damage–viscoplasticity model

A. Khoei, M. Eghbalian, 2012 .

Implementation of plasticity based models in dynamic analysis of earth and rockfill dams: A comparison of Pastor–Zienkiewicz and cap models

Amir R. Khoei, S. M. Haeri, A. R. Azami, 2004 .

Modeling anisotropic mechanical properties and creep behavior of Ni( $$\gamma$$ γ )/Ni_3Al( $$\gamma'$$ γ ′ ) single crystal superalloys at high temperatures

A. Khoei, G. Tolooei Eshlaghi, 2023, Journal of Nanoparticle Research.

Thermo-mechanical characteristics of oxide-coated aluminum nano-powder

A. Khoei, A. Rezaei Sameti, A.M. Orvati Movaffagh, 2024, International Journal of Thermal Sciences.

Modeling density-driven flow and solute transport in heterogeneous reservoirs with micro/macro fractures

A. Khoei, N. Hosseini, S.M. Mousavi, 2023, Advances in Water Resources.

An eXtended Arbitrary Lagrangian‐Eulerian Finite Element Model (X‐ALE‐FEM) in Large Plasticity Deformations

A. Khoei, M. Anahid, K. Shahim, 2007 .

EXTENDED FINITE ELEMENT MODELING OF LARGE DEFORMATION FRICTIONAL CONTACT

A. Khoei, M. Anahid, I. Yadegaran, 2008 .

An Enriched Finite Element Modeling for Metal Forming Processes

A. Khoei, A. Shamloo, S. Biabanaki, 2022 .