C. Yan

发表

Method for Predicting Crack Initiation Life of Notched Specimen Based on Damage Mechanics

Jianhui Liu, Y. Wei, C. Yan, 2018 .

5-DOF Dynamic Modeling of Rolling Bearing with Local Defect considering Comprehensive Stiffness under Isothermal Elastohydrodynamic Lubrication

C. Yan, Fengtao Wang, Pengfei Yan, 2020, Shock and Vibration.

A 4-DOF dynamic model for ball bearing with multiple defects on raceways

C. Yan, Pengfei Yan, Lixiao Wu, 2020 .

Dynamic modeling of rotor-bearing-housing system with local defect on ball bearing using mass distribution and energy methods

C. Yan, Kai Wang, Lixiao Wu, 2021, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics.

Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys*

Z. Rui, C. Yan, Chao-chao Yan, 2014, Strength of Materials.

Influence of Grain Size and Lamellar Spacing on the Fatigue Crack Propagation in γ-TiAl Alloy

Hai Yan Li, Z. Rui, C. Yan, 2014 .

Influence of Microstructure and Stress Ratio on Fatigue Crack Propagation in TiAl Alloy

Z. Rui, C. Yan, R. Feng, 2014 .

Real-time identification of performance degradation stages of rolling element bearings by RVCFI

C. Yan, Lixiao Wu, Tao Wen, 2022, Measurement Science and Technology.

Effects of γ/γ lamellar interfaces on interlamellar crack propagation behaviors of TiAl alloys

Z. Rui, C. Yan, D. Luo, 2021 .

A New Method to Calculate Dynamic Stress Intensity Factor for V-Notch in a Bi-Material Plate

Z. Rui, C. Yan, Youtang Li, 2008 .

Modeling of evolution process of edge over erosion in copper CMP using frequency components algorithm

C. Yan, Lixiao Wu, Sookap Hahn, 2016, 2016 China Semiconductor Technology International Conference (CSTIC).

Crack propagation mechanism of γ-TiAl alloy with pre-existing twin boundary

Z. Rui, C. Yan, H. Cao, 2019, Science China Technological Sciences.

Crack propagation mechanism of γ-TiAl alloy with pre-existing twin boundary

Z. Rui, C. Yan, H. Cao, 2019, Science China Technological Sciences.

Initial fault time estimation of rolling element bearing by backtracking strategy, improved VMD and infogram

Lixiao Wu, Abdalla Babiker, Jiadong Meng, 2021, Journal of Mechanical Science and Technology.

Improved VMD-FRFT based on initial center frequency for early fault diagnosis of rolling element bearing

C. Yan, Lixiao Wu, Jiadong Meng, 2021, Measurement Science and Technology.

An estimating method for initial faulty time of rolling element bearing based on EEMD and spectral kurtosis

Changfeng Yan, Li You, Yaobing Wei, 2013, 2013 6th International Congress on Image and Signal Processing (CISP).

Calculations for Diffusion Probability and Diffusivity of Interstitial Atom in one Lattice for γ-TiAl Alloy

Z. Rui, C. Yan, R. Feng, 2014 .

Influence of Stress Ratio on Fatigue Crack Propagation in TiAl Alloy

Z. Rui, C. Yan, R. Feng, 2013 .

The Micro Crack Nucleation Rule and Fracture Behavior of Titanium Aluminum Alloy

Z. Rui, C. Yan, X. Yi, 2014 .

Illustration of Fracture Mechanism in High Temperature for TiAl Alloys

Z. Rui, C. Yan, R. Feng, 2013 .

Effect of Stress-Sensitive Permeability and Porosity on Production Performance in Water-Soluble Gas Reservoirs

C. Yan, Jiqiang Li, Wende Yan, 2021 .

Nanoindentation of γ-TiAl with Different Crystal Surfaces by Molecular Dynamics Simulations

Z. Rui, C. Yan, H. Cao, 2019, Materials.

Effects of orientation and twin boundary spacing on the mechanical behaviour of γ-TiAl alloy

Z. Rui, C. Yan, Wenke Chen, 2022 .

An Analytical Model for Step Height Reduction in CMP with Different Pattern Densities

Lixiao Wu, Changfeng Yan, C. Yan, 2007 .

Effects of cross-sectional area and aspect ratio coupled with orientation on mechanical properties and deformation behavior of Cu nanowires

Z. Rui, C. Yan, Wenke Chen, 2021, Nanotechnology.

The Applied Research of Fracture for Low Carbon Steel in Extra-Low Cycle Rotating Bending Fatigue

Z. Rui, C. Yan, Youtang Li, 2004 .

The Application of Fracture for Middle Carbon Steel in Extra-Low Cycle Rotating Bending Fatigue Loading

C. Yan, Youtang Li, F. Lang, 2004 .

Dynamic modelling of deep groove ball bearings with different local defects considering skidding and thermal elastohydrodynamic lubrication

C. Yan, Yubao Tian, Lixiao Wu, 2023, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics.

Effects of Polishing Parameters on Evolution of Different Wafer Patterns During Cu CMP

Lixiao Wu, Changfeng Yan, C. Yan, 2015, IEEE Transactions on Semiconductor Manufacturing.

Health Indicator of Bearing Constructed by rms-CUMSUM and GRRMD-CUMSUM With Multifeatures of Envelope Spectrum

Lixiao Wu, Jiadong Meng, Changfeng Yan, 2021, IEEE Transactions on Instrumentation and Measurement.

Health Indicator Construction Based on MD-CUMSUM With Multi-Domain Features Selection for Rolling Element Bearing Fault Diagnosis

Qiang Li, Changfeng Yan, Lixiao Wu, 2019, IEEE Access.

Dynamic response and contact characteristics of shaft-bearing-pedestal system with localized defect using 2-D explicit dynamics finite element model

C. Yan, Lixiao Wu, Junbao Yang, 2022, Journal of Vibroengineering.

Effect of thermal elastohydrodynamic lubrication on vibration characteristics of ball bearing with local defect

C. Yan, Lixiao Wu, Zunyou Lu, 2022, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics.

Dynamic response of rolling element bearing with compound fault considering defect-rolling-element interaction

C. Yan, Lixiao Wu, Yaofeng Liu, 2023, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Dynamic Modeling and Analysis of Rolling Bearing with Compound Fault on Raceway and Rolling Element

C. Yan, Pengfei Yan, Lixiao Wu, 2020, Shock and Vibration.

Fault Diagnostic Expert System of Rolling Element Bearing Based on CLIPS

Guangrui Zhou, Changfeng Yan, Shimin Ma, 2013 .