C. Sonsino

发表

Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety

C. Sonsino, 2007 .

Consideration of Salt-Corrosion Fatigue for Lightweight Design and Proof of Aluminium Safety Components in Vehicle Applications

C. Sonsino, 2021, International Journal of Fatigue.

Required Fatigue Strength (RFS) for evaluating of spectrum loaded components by the example of cast-aluminium passenger car wheels

C. Sonsino, M. Breitenberger, I. Krause, 2020 .

Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method

C. Sonsino, Ö. Karakas, G. Zhang, 2018, International Journal of Fatigue.

Multiaxial fatigue of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) for automotive safety components under constant and variable amplitude loading

C. Sonsino, R. Franz, 2016 .

Lightweight design with welded high-frequency mechanical impact (HFMI) treated high-strength steel joints from S700 under constant and variable amplitude loadings

G. Marquis, C. Sonsino, H. Yıldırım, 2016 .

Variable amplitude fatigue of high-strength cast iron alloys for automotive applications

C. Sonsino, H. Kaufmann, S. Schoenborn, 2016 .

Cumulative Damage of High-strength Cast Iron Alloys for Automotive Applications

Cetin Morris Sonsino, Heinz Kaufmann, C. Sonsino, 2015 .

Lightweight Potential of Welded High-strength Steel Joints from S700 Under Constant and Variable Amplitude Loading by High-frequency Mechanical Impact (HFMI) Treatment☆

G. Marquis, C. Sonsino, H. Yıldırım, 2015 .

A simple procedure for estimating SN-lines for crack initiation from SN-lines for total failure*

Cetin Morris Sonsino, C. Sonsino, 2015 .

Application of stress-based multiaxial fatigue criteria for laserbeam-welded thin aluminium joints under proportional and non-proportional variable amplitude loadings

Cetin Morris Sonsino, Heinz Kaufmann, A. Bolchoun, 2014 .

Verification of FAT Values for the Application of the Notch Stress Concept with the Reference Radii Rref = 1.00 and 0.05 mm

Cetin Morris Sonsino, Bernd Kranz, C. Sonsino, 2010 .

S-N Lines for Welded Thin Joints — Suggested Slopes and FAT Values for Applying the Notch Stress Concept with Various Reference Radii

Cetin Morris Sonsino, Thomas Bruder, J. Baumgartner, 2010 .

Effects on Lifetime under Spectrum Loading*

C. Sonsino, 2010 .

Effect of residual stresses on the fatigue behaviour of welded joints depending on loading conditions and weld geometry

Cetin Morris Sonsino, C. Sonsino, 2009 .

Fatigue design of welded joints from the wrought magnesium alloy AZ31 by the local stress concept with the fictitious notch radii of rf = 1.0 and 0.05 mm

Cetin Morris Sonsino, Ö. Karakas, C. Sonsino, 2008 .

High‐Strength Steels in Welded State for Light‐Weight Constructions under High and Variable Stress Peaks

Cetin Morris Sonsino, H. Kaufmann, C. Sonsino, 2008 .

Fatigue Design Values for Welded Joints of the Wrought Magnesium Alloy AZ31 (ISO-MgAI3Zn1) According to the Nominal, Structural and Notch Stress Concepts in Comparison to Welded Steel and Aluminium Connections

K. Dilger, K. Dilger, H. Hanselka, 2008 .

Fatigue design with cast magnesium alloys under constant and variable amplitude loading

C. Sonsino, K. Dieterich, 2006 .

Multiaxial fatigue assessment for automotive safety components of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) under constant and variable amplitude loading

C. Sonsino, R. Franz, 2017 .

Fatigue strength and applications of cast aluminium alloys with different degrees of porosity

C. M. Sonsino, C. Sonsino, J. Ziese, 1993 .

Critical plane approach for the assessment of the fatigue behaviour of welded aluminium under multiaxial loading

C. M. Sonsino, C. Sonsino, M. Kueppers, 2003 .

Influence of material’s ductility and local deformation mode on multiaxial fatigue response

Cetin Morris Sonsino, C. Sonsino, 2011 .

Fatigue assessment of welded joints by local approaches Second edition

Cetin Morris Sonsino, Wolfgang Fricke, D Radaj, 2007 .

Multiaxial fatigue life assessment for reinforced polymers

Cetin Morris Sonsino, Andreas Büter, Yves Nadot, 2011 .

Microsoft Word-numero_33_art_30

C. Sonsino, H. Kaufmann, A. Bolchoun, 2015 .

Numerical and experimental validation of residual stresses of laser‐welded joints and their influence on the fatigue behaviour

C. Sonsino, J. Wiebesiek, R. Sepe, 2019, Fatigue & Fracture of Engineering Materials & Structures.

Analysis of different fatigue damage accumulation theories and damage parameters based on experiments with the steel HC340LA

Cetin Morris Sonsino, Francesco Frendo, Tobias Melz, 2016 .

Fatigue design principles for sintered steel components

C. Sonsino, 2006 .

On the use of the Modified Wöhler Curve Method applied along with the Reference Radius Concept to perform the multiaxial fatigue assessment of welded joints

L. Susmel, R. Tovo, C. Sonsino, 2013 .

ON THE USE OF THE WEIGHT FUNCTION APPROACH TO STUDY FATIGUE CRACK GROWTH IN CAST IRON COMPONENTS

V. Fontanari, C. Sonsino, H. Kaufmann, 2008 .

fatigue assessment of welded joints in AlMg 4.5Mn aluminium alloy (AA 5083) by local approaches

C. M. Sonsino, D. Radaj, C. Sonsino, 1999 .

Fatigue behaviour of welded joints from magnesium alloy (AZ31) according to the local strain concept

C. Sonsino, H. Kaufmann, Ö. Karakaş, 2010 .

Fatigue strength improvement by ultrasonic impact treatment of highly stressed spokes of cast aluminium wheels

C. Sonsino, A. Berg-Pollack, F.-J. Voellmecke, 2011 .

Warm powder compaction substitutes conventionally double pressed and double sintered synchroniser hubs

C. Sonsino, R. Ratzi, 2004 .

Overload effects on a ferritic‐baintic steel and a cast aluminium alloy: two very different behaviours

N. Saintier, C. Sonsino, H. Kaufmann, 2011 .

9 – Structural stress or strain approach for spot-welded and similar lap joints

W. Fricke, C. Sonsino, D. Radaj, 2006 .

Experimental analysis of the ratcheting behavior of linear flow split flanges of HC340LA

Cetin Morris Sonsino, Tobias Melz, Francesco Frendo, 2014 .

A Consideration of Allowable Equivalent Stresses for Fatigue Design of Welded Joints According to the Notch Stress Concept with the Reference Radii rref = 1.00 and 0.05 mm

Cetin Morris Sonsino, C. Sonsino, 2009 .

Recent developments in local concepts of fatigue assessment of welded joints

Cetin Morris Sonsino, Wolfgang Fricke, Dieter Radaj, 2009 .

Fatigue strength of laser beam welded thin steel structures under multiaxial loading

Cetin Morris Sonsino, M. Eibl, C. Sonsino, 2006 .

Fatigue testing under variable amplitude loading

C. M. Sonsino, C. Sonsino, 2007 .

APPLICATION OF THE STRAIN ENERGY DENSITY PARAMETER FOR ESTIMATION OF MULTIAXIAL FATIGUE LIFE OF SINTERED STEELS WITH STRESS CONCENTRATORS

C. Sonsino, T. Łagoda, P. Ogonowski, 2009 .

Notch stress concepts for the fatigue assessment of welded joints – Background and applications

Cetin Morris Sonsino, Wolfgang Fricke, Arash Ahmadi, 2012 .

Fatigue Design of Welded Components of Railway Vehicles — Influence of Manufacturing Conditions and Weld Quality

C. Moser, C. Sonsino, M. Kassner, 2010 .

Fatigue resistance and machinability of a high-strength sintered steel in dependence on tempering temperature

G. Straffelini, C. Sonsino, K. Lipp, 1993 .

Influence of Local Strain Distribution on Low-Cycle Fatigue Behavior of Thick-Walled Structures

Cetin Morris Sonsino, Vatroslav Grubisic, C. Sonsino, 1982 .

The influence of coldforming on the low cycle fatigue behaviour of the finegrained structural steel Fe E 47 and the age-hardened aluminium alloy AlCuMg2

C. Sonsino, 1984 .

Testing P/M materials for high loading gear applications

K. Michaelis, J. Rice, C. Sonsino, 1999 .

Multiaxial fatigue of welded joints under in-phase and out-of-phase local strains and stresses

C. M. Sonsino, C. Sonsino, 1995 .

Multiaxial fatigue life response depending on proportionality grade between normal and shear strains/stresses and material ductility

C. Sonsino, 2020 .

Numerical measures of the degree of non-proportionality of multiaxial fatigue loadings

Cetin Morris Sonsino, Heinz Kaufmann, A. Bolchoun, 2015 .

Transferability of Material Data for the Example of a Randomly Loaded Forged Truck Stub Axle

Cetin Morris Sonsino, Heinz Kaufmann, Vatroslav Grubisic, 1997 .

Overview of the State of the Art on Multiaxial Fatigue of Welds

Cetin Morris Sonsino, C. Sonsino, 1999 .

A notch stress intensity approach to assess the multiaxial fatigue strength of welded tube‐to‐flange joints subjected to combined loadings

C. M. Sonsino, Paolo Lazzarin, P. Lazzarin, 2004 .

Structural durability of cast aluminium gearbox housings of underground railway vehicles under variable amplitude loading

Cetin Morris Sonsino, C. Sonsino, 2005 .

Fatigue design of highly loaded short-glass-fibre reinforced polyamide parts in engine compartments

Cetin Morris Sonsino, C. Sonsino, E. Moosbrugger, 2008 .

Fatigue and Short Crack Propagation Behaviour of Cast Nickel Base Alloys in 713 C and Mar-M-247 LC at High Temperatures

C. Sonsino, J. Bergmann, U. Brandt, 1992 .

Fatigue crack initiation and growth in AlMg4.5Mn butt weldments

C. M. Sonsino, F. V. Lawrence, F. Lawrence, 2001 .

Fatigue Design for Powder Metallurgy

C. Sonsino, 1990 .

Prediction of service fatigue strength of a welded tubular joint on the basis of the notch strain approach

D. Radaj, C. Sonsino, D. Radaj, 1998 .

A multiaxial fratigue life criterion for non-symmetrical and non-proportional elasto-plastic deformation

Cetin Morris Sonsino, Mauro Filippini, I. V. Papadopoulos, 2003 .

Assessment of multiaxial fatigue behaviour of welded joints under combined bending and torsion by application of a fictitious notch radius

Cetin Morris Sonsino, Tadeusz Łagoda, C. Sonsino, 2004 .

Experimental results and fatigue life evaluation of magnesium laserbeam‐welded joints under proportional and non‐proportional multiaxial fatigue loading with variable amplitudes

C. Sonsino, H. Kaufmann, T. Melz, 2017 .

Interpretation of Overload Effects Under Spectrum Loading of Welded High-Strength Steel Joints

J. Eufinger, C. Sonsino, R. Wagener, 2011 .

Principles of Variable Amplitude Fatigue Design and Testing

C. M. Sonsino, C. Sonsino, 2004 .

Equivalent Stress Concepts for Transforming of Variable Amplitude into Constant Amplitude Loading and Consequences for Design and Durability Approval

C. Sonsino, M. Breitenberger, J. Baumgartner, 2022, International Journal of Fatigue.

Lightweight-structural durability design by consideration of variable amplitude loading

Cetin Morris Sonsino, Tobias Melz, R. Heim, 2016 .

Fatigue assessment of laser welded thin sheet aluminium

Cetin Morris Sonsino, Heinz Kaufmann, M. Eibl, 2003 .

3 – Structural stress or strain approach for seam-welded joints

W. Fricke, C. Sonsino, D. Radaj, 2006 .

The improvement of fatigue behaviour of sintered steels by surface rolling

F. Müller, C. Sonsino, R. Mueller, 1992 .