Hong Zhang

发表

Vacuum retarding and air accelerating effect on the high-cycle and very-high-cycle fatigue behavior of a ZK60 magnesium alloy

Qingyuan Wang, Kun Yang, Chong Wang, 2021 .

Effects of microstructural inhomogeneities and micro-defects on tensile and very high cycle fatigue behaviors of the friction stir welded ZK60 magnesium alloy joint

Qingyuan Wang, Chong Wang, Yongjie Liu, 2019, International Journal of Fatigue.

A creep damage model for low cycle fatigue based on the equivalent creep stress: Establishment, verification and application

Qingyuan Wang, Yongjie Liu, Yao Chen, 2021, Engineering Fracture Mechanics.

Effects of metallic microstructures on fatigue fracture of Q345 steel

Qingyuan Wang, Qiang Chen, Hong Zhang, 2020 .

A review on the recovery of fire-damaged concrete with post-fire-curing

Qingyuan Wang, Guomin Zhang, Yongjie Liu, 2020 .

CoCrFeNiMo0.2 high entropy alloy by laser melting deposition: Prospective material for low temperature and corrosion resistant applications

G. Le, Hong Zhang, Xue Liu, 2020 .

Fatigue Crack Propagation of Nickel-Based Superalloy: Experiments and Simulations with Extended Finite Element Method

Qingyuan Wang, Yongjie Liu, Hong Zhang, 2019, Journal of Materials Engineering and Performance.

The Effect of Stress Ratios on the Very High Cycle Fatigue Behavior of 9%Cr Turbine Steel at 630 °C

Qingyuan Wang, Wei Zhang, Chong Wang, 2020, Materials.

The interaction between dislocations and intergranular cracks

Hong Zhang, A. H. King, R. Thomson, 1991 .

The effect of heterogeneous (211) additions on the microstructure and superconducting properties of melt-textured-growth YBa2Cu3Oy

Hong Zhang, S. Gong, 1996 .

Effect of high temperature on crack initiation of super austenitic stainless steel 654SMO in very high cycle fatigue

Qingyuan Wang, Chong Wang, Yongjie Liu, 2020 .

Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy

J. Llorca, Hong Zhang, A. Ma, 2020, International journal of plasticity.

Tensile and very high cycle fatigue behaviors of a compressor blade titanium alloy at room and high temperatures

Qingyuan Wang, Chong Wang, Yongjie Liu, 2021 .

Tensile properties, strain rate sensitivity and failure mechanism of single crystal superalloys CMSX-4

Qingyuan Wang, Yongjie Liu, Lang Li, 2020 .

Electron beam welding of Nimonic 80A: Integrity and microstructure evaluation

Yongjie Liu, Hong Zhang, Jiu-kai Li, 2018 .

Comparisons of low cycle fatigue response, damage mechanism, and life prediction of MarBN steel under stress and strain-controlled modes

Qingyuan Wang, Wei Zhang, Chong Wang, 2021 .

Cyclic responses and microstructure sensitivity of Cr-based turbine steel under different strain ratios in low cycle fatigue regime

Yongjie Liu, Hong Zhang, X. Gong, 2021 .

Low cycle fatigue properties, damage mechanism, life prediction and microstructure of MarBN steel: Influence of temperature

Yongjie Liu, Hong Zhang, Qingsong Li, 2021 .

A comparative study of low cycle fatigue behavior and microstructure of Cr-based steel at room and high temperatures

Qingyuan Wang, Wei Zhang, Chong Wang, 2020 .

Crack initiation and propagation characteristics of a dual‐phase Mg–Li alloy under high‐cycle and very‐high‐cycle fatigue regimes

Qingyuan Wang, Chong Wang, Yongjie Liu, 2021, Fatigue & Fracture of Engineering Materials & Structures.

Localized dislocation interactions within slip bands and crack initiation in Mg-10Gd-3Y-0.3Zr alloy

Qingyuan Wang, Qiang Chen, Chong Wang, 2021 .

Recovery Behavior of the Macro-Cracks in Elevated Temperature-Damaged Concrete after Post-Fire Curing

Chong Wang, Yongjie Liu, Chao He, 2022, Materials.

Dependence on temperature of compression behavior and deformation mechanisms of nickel-based single crystal CMSX-4

Wei Zhang, Chong Wang, Yongjie Liu, 2021 .

Effects of microstructure on crack initiation in super martensitic stainless steel under very‐high‐cycle fatigue at elevated temperature

Chong Wang, Yongjie Liu, Chao He, 2022, Fatigue & Fracture of Engineering Materials & Structures.

Influence of Welded Pores on Very Long-Life Fatigue Failure of the Electron Beam Welding Joint of TC17 Titanium Alloy

Qingyuan Wang, Yongjie Liu, Yao Chen, 2019, Materials.

Effects of defects on tensile and fatigue behaviors of selective laser melted titanium alloy in very high cycle regime

Qingyuan Wang, Yongjie Liu, Yao Chen, 2020 .

Tensile behavior, microstructural evolution, and deformation mechanisms of a high Nb-TiAl alloy additively manufactured by electron beam melting

D. Lu, Yongjie Liu, Hong Zhang, 2022, Materials & Design.

Effects of local microstructure on crack initiation in super martensitic stainless steel under very-high-cycle fatigue

Qingyuan Wang, Chong Wang, Yao Chen, 2022, International Journal of Fatigue.

Microstructure evolution and mechanical properties of two kinds of weathering steel welded joints

Chong Wang, Fulin Liu, Hong Zhang, 2022, Fatigue & Fracture of Engineering Materials & Structures.

Tensile Behavior, Constitutive Model, and Deformation Mechanisms of MarBN Steel at Various Temperatures and Strain Rates

Hong Zhang, Qingsong Li, Yunqing Jiang, 2022, Materials.

Very high cycle fatigue behavior of laser powder bed fusion additively manufactured Ti6Al4V alloy at elevated temperature

Chong Wang, Yao Chen, Fulin Liu, 2023, International Journal of Fatigue.

Sliding wear characteristics of austempered ductile iron with and without laser hardening

Hong Zhang, Guang-Xi Lu, 1990 .

Dependence on Manufacturing Directions of Tensile Behavior and Microstructure Evolution of Selective Laser Melting Manufactured Inconel 625

D. Lu, Hong Zhang, Qing Wang, 2022, Journal of Materials Engineering and Performance.

Comparison in Deformation Behavior, Microstructure, and Failure Mechanism of Nickel Base Alloy 625 under Two Strain Rates

D. Lu, Hong Zhang, Tianjian Wang, 2021, Materials.

Effects of Thermal Treatment on the Mechanical Properties of Bamboo Fiber Bundles

Chong Wang, Yao Chen, Lang Li, 2023, Materials.

Indentation on a half-infinite one-dimensional hexagonal quasi-crystal space by a rigid flat-ended cylindrical indenter with uniform heat flux or temperature

Qingyuan Wang, Hong Zhang, Peidong Li, 2019, Mechanics of Materials.

Understanding of Excellent Mechanical Performance of 304L Manufactured by Optimal Selective Laser Melting (SLM) Conditions

Hong Zhang, Yaxin Ma, Dongling Li, 2023, Materials.

Temperature and Strain Rate Dependence on the Tensile Mechanical Properties, Constitutive Equations, and Fracture Mechanisms of MarBN Steel

Hong Zhang, Yunqing Jiang, Qingyu Wang, 2023, Materials.

The high cycle fatigue behavior, failure characteristics, and fatigue life empirical relationship of 9% Cr steel under different stress ratios at 630 ℃

Hong Zhang, Tianjian Wang, Yifan Cai, 2023, International Journal of Fatigue.

Fatigue-induced HCP-to-FCC phase transformation assisting crack nucleation of pure zirconium in high cycle fatigue regime

Chong Wang, Yao Chen, Fulin Liu, 2023, Materials Science and Engineering: A.

Microstructure-Based Multiscale Modeling of Deformation in MarBN Steel under Uniaxial Tension: Experiments and Finite Element Simulations

Hong Zhang, Yida Zhang, Qingyu Wang, 2023, Materials.

The low cycle fatigue property, damage mechanism, and life prediction of additively manufactured Inconel 625: Influence of temperature

Hong Zhang, Yunqing Jiang, Qingyu Wang, 2023, Fatigue & Fracture of Engineering Materials & Structures.

Effect of temperature on tensile behavior, fracture morphology, and deformation mechanisms of Nickel-based additive manufacturing 939 superalloy

Hong Zhang, Yunqing Jiang, Qingyu Wang, 2023, Journal of Alloys and Compounds.

Electron Beam Welding of Nimonic 80A Superalloy: Microstructure Evolution and EBSD Study After Aging Heat Treatment

Qingyuan Wang, Hong Zhang, Peidong Li, 2019, Journal of Materials Engineering and Performance.

Analysis of the Tensile Deformation Behaviors and Microstructure Characterization under Various Temperatures of MarBN Steel by EBSD

Hong Zhang, Yunqing Jiang, Qingyu Wang, 2023, Materials.

The cyclic deformation behavior and microstructural evolution of 304L steel manufactured by selective laser melting under various temperatures

Hong Zhang, Yunqing Jiang, Qingyu Wang, 2023, Materials Science and Engineering: A.

Equation Chapter 1 Section 1 Deformation nanotwins in a single-crystal Ni-based superalloy at room temperature and low strain rate

Lang Li, Hong Zhang, X. Gong, 2022, Materials Characterization.

The cyclic response behavior, failure mechanism, and life prediction model of 9% Cr‐based steel under different strain ratios in the low cyclic fatigue regime at 430°C

Hong Zhang, Qingyu Wang, Quanyi Wang, 2023, Fatigue & Fracture of Engineering Materials & Structures.

A deep learning approach for low-cycle fatigue life prediction under thermal–mechanical loading based on a novel neural network model

Hong Zhang, Qingyuan Wang, Yang Yang, 2024, Engineering Fracture Mechanics.

Machine Learning- and Finite Element-Based Temperature- and Rate-Dependent Plasticity Model: Application to the Tensile Behavior

Hong Zhang, Quanyi Wang, Qingyuan Wang, 2024, Journal of Materials Engineering and Performance.

Crystal plasticity analysis of tensile plastic behavior and damage mechanisms of additive manufactured TiAl alloy under elevated temperatures

Yongjie Liu, Hong Zhang, Tianjian Wang, 2024, Journal of Materials Research and Technology.