Suxiang Wu

发表

Tensile and fatigue properties of ultrafine-grained low-carbon steel processed by equal channel angular pressing

Z. Zhang, J. Pang, M. Yang, 2012 .

Fatigue strengths of Cu–Be alloy with high tensile strengths

Z. Zhang, Q. Duan, J. Pang, 2010 .

Influence of grain size and texture on the yield asymmetry of Mg-3Al-1Zn alloy

Suxiang Wu, S. Yin, C. Wang, 2011 .

Cyclic deformation behavior of as-extruded Mg–3%Al–1%Zn

H. J. Yang, Suxiang Wu, Fan Yang, 2008 .

Significance of stacking fault energy in bulk nanostructured materials: Insights from Cu and its binary alloys as model systems

X. An, Z. Zhang, Suxiang Wu, 2019, Progress in Materials Science.

Tensile deformation and fracture behaviors of high purity polycrystalline zinc

Jinhuai Liu, Chong-xiang Huang, Z. Zhang, 2008 .

Microstructure and mechanical properties of Cu and Cu–Zn alloys produced by equal channel angular pressing

Zhe-feng Zhang, X. An, Q. Duan, 2011 .

Strain hardening behavior of a two-phase Cu–Ag alloy processed by high-pressure torsion

N. Gao, T. Langdon, Z. Zhang, 2011 .

Electrocatalytic behavior of Pt-modified polyaniline electrode for methanol oxidation: Effect of Pt deposition modes

Suxiang Wu, L. Niu, Qiuhong Li, 2005 .

Significance of stacking fault energy on microstructural evolution in Cu and Cu–Al alloys processed by high-pressure torsion

N. Gao, T. Langdon, Z. Zhang, 2011 .

Enhancement of mechanical properties of heat-resistant martensitic steel processed by equal channel angular pressing

L. Y. Zhang, Cheng-biao Wang, Chong-xiang Huang, 2009 .

Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing

N. Gao, T. Langdon, X. An, 2012 .

Mechanically driven annealing twinning induced by cyclic deformation in nanocrystalline Cu

X. An, Z. Zhang, Suxiang Wu, 2013 .

Enhancing strength and ductility of Mg–12Gd–3Y–0.5Zr alloy by forming a bi-ultrafine microstructure

X. Shao, X. An, Z. Zhang, 2011 .

Response to comments on "Influences of crystallographic orientations on deformation mechanism and grain refinement of Al single crystals subjected to one-pass equal-channel angular pressing"

Z. Zhang, Suxiang Wu, S. Li, 2008 .

Recrystallization in fatigued copper single crystals under electropulsing

Suxiang Wu, G. He, S. Xiao, 2002 .

Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion

N. Gao, T. Langdon, X. An, 2011 .

Enhancing the selectivity of the hydrogenation of naphthalene to tetralin by high temperature water

Suxiang Wu, B. Han, B. Zong, 2009 .

Synthesis of unsymmetrical organic carbonates catalyzed by a sulfonic acid-functionalized zirconium phosphonate

Suxiang Wu, B. Han, Zhaofu Zhang, 2011 .

Bimetallic Au/Pd catalyzed aerobic oxidation of alcohols in the poly(ethylene glycol)/CO2 system

Suxiang Wu, B. Han, T. Jiang, 2010 .

Water as an additive to enhance the ring opening of naphthalene

Suxiang Wu, B. Han, Peng Zhang, 2012 .

Effects of stacking fault energy on the thermal stability and mechanical properties of nanostructured Cu-Al alloys during thermal annealing

X. An, Z. Zhang, Suxiang Wu, 2011 .

Evolution of microstructural homogeneity in copper processed by high-pressure torsion

N. Gao, T. Langdon, X. An, 2010 .

Effect of CO2 on conversion of inulin to 5-hydroxymethylfurfural and propylene oxide to 1,2-propanediol in water

Suxiang Wu, B. Han, Zhaofu Zhang, 2010 .

Anelastic relaxation behavior of hydrogen in L12 ordered intermetallic compound Ni3Al

Chong-xiang Huang, Suxiang Wu, Guorong Li, 2002 .

Corrosion inhibition of iron in acidic solutions by alkyl quaternary ammonium halides: Correlation between inhibition efficiency and molecular structure

Suxiang Wu, L. Niu, F. Wei, 2005 .

High strength and utilizable ductility of bulk ultrafine-grained Cu-Al alloys

Chong-xiang Huang, P. Zhang, X. An, 2008 .

Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing

Zujian Wang, Chong-xiang Huang, X. An, 2009 .

Effects of equal channel angular pressing on the strength and toughness of Al–Cu alloys

Z. Zhang, Q. Duan, Y. Tian, 2011 .

Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP

Chong-xiang Huang, Z. Zhang, G. Yang, 2008 .

Cyclic deformation and fatigue properties of Al-0.7 wt.% Cu alloy produced by equal channel angular pressing

Z. G. Wang, Z. Zhang, Suxiang Wu, 2005 .

Microstructural evolution and mechanical properties of a two-phase Cu–Ag alloy processed by high-pressure torsion to ultrahigh strains

N. Gao, T. Langdon, Z. Zhang, 2011 .

Direct observations of microstructural evolution in a two-phase Cu-Ag alloy processed by high-pressure torsion

N. Gao, T. Langdon, X. An, 2010 .

Optimizing strength and ductility of Cu-Zn alloys through severe plastic deformation

N. Gao, T. Langdon, P. Zhang, 2012 .

Effects of dislocation slip mode on high-cycle fatigue behaviors of ultrafine-grained Cu–Zn alloy processed by equal-channel angular pressing

P. Zhang, X. An, M. Yang, 2013 .

Microstructures, strengthening mechanisms and fracture behavior of Cu–Ag alloys processed by high-pressure torsion

T. Langdon, P. Zhang, Y. Tian, 2012 .

The effect of stacking fault energy on equilibrium grain size and tensile properties of nanostructured copper and copper-aluminum alloys processed by equal channel angular pressing

Qingyuan Wang, Chong-xiang Huang, Z. Zhang, 2012 .

The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion

N. Gao, T. Langdon, X. An, 2011 .

Investigation on the geometrical aspect of deformation during equal-channel angular pressing by in-situ physical modeling experiments

Z. Zhang, Suxiang Wu, Shuzhen Li, 2008 .

Microstructure evolution of Mg–14% Li–1% Al alloy during the process of equal channel angular pressing

Suxiang Wu, Peijie Li, T. Liu, 2007 .

Enhanced cyclic deformation responses of ultrafine-grained Cu and nanocrystalline Cu–Al alloys

X. An, Z. Zhang, Suxiang Wu, 2014 .

Twin boundaries: Strong or weak?

P. Zhang, Suxiang Wu, Zhefeng Zhang, 2008 .

Tensile and compressive deformation behaviors of commercially pure Al processed by equal-channel angular pressing with different dies

Z. Zhang, Q. Duan, Suxiang Wu, 2008 .

Varying tensile fracture mechanisms of Cu and Cu-Zn alloys with reduced grain size: From necking to shearing instability

P. Zhang, M. Yang, Suxiang Wu, 2014 .

Comparison of microstructures and mechanical properties of a Cu–Ag alloy processed using different severe plastic deformation modes

N. Gao, T. Langdon, Z. Zhang, 2011 .

Hydrocracking of Anthracene to Ethyl Biphenyl Promoted by Coupling Supercritical Water and Cracking Catalysts

Suxiang Wu, B. Han, T. Jiang, 2011 .

Enhanced rate-dependent tensile deformation in equal channel angularly pressed Sn–Ag–Cu alloy

Zujian Wang, Suxiang Wu, J. Shang, 2009 .

Shear stability of metallic glasses

J. Shen, Z. Zhang, Suxiang Wu, 2011 .

Conversions of Cellobiose and Inulin to Deoxyfructosazine in Aqueous Solutions

Suxiang Wu, B. Han, Guanying Yang, 2011 .

Microstructural evolution and shear fracture of Cu-16 at.% Al alloy induced by equal channel angular pressing

X. An, Z. Zhang, Suxiang Wu, 2010 .

Shear banding observations in Cu–16 wt.% Ag alloy subjected to one-pass equal channel angular pressing

Z. Zhang, Yanna Tian, Suxiang Wu, 2010 .

Mechanical Behaviors of Ultrafine-Grained 301 Austenitic Stainless Steel Produced by Equal-Channel Angular Pressing

Chong-xiang Huang, Z. Zhang, G. Yang, 2011 .

Deformation and fracture behaviors of Ti-based metallic glass under multiaxial stress state

Suxiang Wu, F. Wu, Wei Zheng, 2012 .