S. Nishimura

发表

Critical hydrogen pressure at crack initiation of silica-filled EDPM composite in high pressure hydrogen gas

J. Yamabe, S. Nishimura, 2009 .

STEM-EELS analysis of improved cycle life of lithium-ion cells with Al2O3-coated LiNi0.8Co0.1Mn0.1O2 cathode active material

E. Seki, S. Nishimura, Naoki Kimura, 2021, Journal of Alloys and Compounds.

5-V plateau observed for Li-rich Li1 + xMn2 - XO4 stoichiometric spinels containing low-temperature-grown Li2MnO3 as an impurity phase

S. Nishimura, M. Kasai, Hideyuki Dohi, 2016 .

Influence of Fillers on Hydrogen Penetration Properties and Blister Fracture of EPDM Comosites Exposed to 10 MPa Hydrogen Gas

Junichiro Yamabe, Shin Nishimura, J. Yamabe, 2008 .

Hydrogen permeation under high pressure conditions and the destruction of exposed polyethylene-property of polymeric materials for high-pressure hydrogen devices (2)-

S. Nishimura, M. Kasai, F. Kaneko, 2021 .

High-pressure gaseous hydrogen permeation test method -property of polymeric materials for high-pressure hydrogen devices (1)-

S. Nishimura, Kiyoaki Onoue, H. Fujiwara, 2020 .

Penetrated hydrogen content and volume inflation in unfilled NBR exposed to high-pressure hydrogen–What are the characteristics of unfilled-NBR dominating them?

S. Nishimura, H. Fujiwara, H. Ono, 2018, International Journal of Hydrogen Energy.

Degradation behavior of acrylonitrile butadiene rubber after cyclic high-pressure hydrogen exposure

S. Nishimura, H. Fujiwara, H. Ono, 2015 .

Hydrogen-induced degradation of rubber seals

J. Yamabe, S. Nishimura, 2012 .

Evaluation of hydrogen dissolved in rubber materials under high-pressure exposure using nuclear magnetic resonance

S. Nishimura, H. Fujiwara, 2012 .

Evaluation of the change in chemical structure of acrylonitrile butadiene rubber after high-pressure hydrogen exposure

J. Yamabe, S. Nishimura, H. Fujiwara, 2012 .

Influence of carbon black on crack damage of sealing rubber material exposed to high-pressure hydrogen gas

S. Nishimura, Junichiro Yaiviabe, 2011 .

Fracture Analysis of Rubber Sealing Material for High Pressure Hydrogen Vessel

J. Yamabe, S. Nishimura, H. Fujiwara, 2011 .

Fracture analysis of rubber sealing meterial for high pressure hydrogen vessel

J. Yamabe, S. Nishimura, H. Fujiwara, 2009 .

A Study on Sealing Behavior of Rubber O-Ring in High Pressure Hydrogen Gas

J. Yamabe, S. Nishimura, A. Koga, 2009 .

Critical current properties in YBCO coated IBAD tapes

M. Takeo, T. Saitoh, S. Nishimura, 2002 .

Angular dependence of critical current properties in YBCO coated tape under high magnetic field up to 18 T

T. Saitoh, S. Nishimura, S. Awaji, 2002 .

Tensile Properties and Swelling Behavior of Sealing Rubber Materials Exposed to High-Pressure Hydrogen Gas

J. Yamabe, S. Nishimura, 2012 .

Molecular picture of fluoropolymer adsorption on nanocarbon materials

S. Nishimura, Keiji Tanaka, D. Kawaguchi, 2021, Polymer Journal.

Local kinetics of cavitation in hydrogen-exposed EPDM using in-situ X-Ray tomography: Focus on free surface effect and cavity interaction

S. Nishimura, S. Castagnet, A. Nait-Ali, 2020 .

Influence of carbon black on decompression failure and hydrogen permeation properties of filled ethylene-propylene–diene–methylene rubbers exposed to high-pressure hydrogen gas

J. Yamabe, S. Nishimura, 2011 .

Nanoscale fracture analysis by atomic force microscopy of EPDM rubber due to high-pressure hydrogen decompression

J. Yamabe, S. Nishimura, 2011 .

Application of acoustic emission method to detection of internal fracture of sealing rubber material by high-pressure hydrogen decompression

J. Yamabe, S. Nishimura, T. Matsumoto, 2011 .

Crack Growth Behavior of Sealing Rubber under Static Strain in High-Pressure Hydrogen Gas

J. Yamabe, S. Nishimura, 2011 .

Inhomogeneity in acrylonitrile butadiene rubber during hydrogen elimination investigated by small-angle X-ray scattering

S. Nishimura, H. Fujiwara, Keiko Ohyama, 2018 .

High-pressure hydrogen permeability model for crystalline polymers

S. Nishimura, H. Fujiwara, Keiko Ohyama, 2022, International Journal of Hydrogen Energy.

Relation between High-Pressure Hydrogen Resistance and Morphology on Blends of Nylon 6-66 and Ethylene Vinyl Alcohol Copolymer with 1,2-Diol Side Chains

S. Nishimura, K. Tokumitsu, H. Fujiwara, 2019, Journal of the Society of Materials Science, Japan.

E-J characteristics of Bi-2223/Ag tapes as a function of temperature, magnetic field and angle

Y. Sumiyoshi, S. Nishimura, M. Inoue, 2002 .

Nanoscale heterogeneous structure of polyacrylonitrile-co-butadiene with different molecular mobilities analyzed by spin–spin relaxation time

S. Nishimura, H. Fujiwara, H. Ono, 2013 .

Fabrication of nitrogen-containing cordierite ceramics

S. Nishimura, Sohei Sukenaga, K. Nakashima, 2010 .

Hydrogen characteristics and ordered structure of mono-mesogen type liquid-crystalline epoxy polymer

S. Nishimura, H. Fujiwara, S. Kawamoto, 2016 .

Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas

Junichiro Yamabe, Shin Nishimura, J. Yamabe, 2009 .

Influence of repetitions of the high-pressure hydrogen gas exposure on the internal damage quantity of high-density polyethylene evaluated by transmitted light digital image

S. Nishimura, Kiyoaki Onoue, H. Fujiwara, 2019, International Journal of Hydrogen Energy.

Swelling measurement during sorption and decompression in a NBR exposed to high-pressure hydrogen

S. Nishimura, S. Castagnet, G. Benoît, 2017 .

Effects of fillers on the hydrogen uptake and volume expansion of acrylonitrile butadiene rubber composites exposed to high pressure hydrogen: -Property of polymeric materials for high pressure hydrogen devices (3)-

S. Nishimura, H. Fujiwara, H. Ono, 2021, International Journal of Hydrogen Energy.

Fracture Behavior of Ethylene Propylene Rubber for Hydrogen Gas Sealing Under High-pressure Hydrogen

S. Nishimura, 2013 .

Evaluation on High-Pressure Hydrogen Decompression Failure of Rubber O-ring Using Design of Experiments

J. Yamabe, S. Nishimura, A. Koga, 2011 .

Failure behavior of rubber O-ring under cyclic exposure to high-pressure hydrogen gas

Junichiro Yamabe, Shin Nishimura, J. Yamabe, 2013 .

Estimation of hydrogen pressure at blister initiation of EPDM composite exposed to high pressure hydrogen gas

J. Yamabe, S. Nishimura, 2009 .

Fracture behaviour of ethylene propylene rubber for hydrogen gas sealing under high pressure hydrogen

S. Nishimura, 2014 .

Influence of bending strain on Bi-2223 tape

M. Takeo, S. Nishimura, M. Inoue, 2002 .

A visualizing study of blister initiation behavior by gas decompression

J. Yamabe, S. Nishimura, A. Koga, 2013 .

Detection of hydrogen dissolved in acrylonitrile butadiene rubber by 1H nuclear magnetic resonance

S. Nishimura, H. Fujiwara, 2012 .

Determination of chemical shift of gas-phase hydrogen molecules by 1H nuclear magnetic resonance

J. Yamabe, S. Nishimura, H. Fujiwara, 2010 .

Fracture Behavior and Hydrogen Permeation Properties of EPDM for Sealing under High Pressure Hydrogen Gas

J. Yamabe, S. Nishimura, A. Koga, 2010 .

Influence of high-pressure hydrogen exposure on increase in volume by gas absorption and tensile properties of sealing rubber material

J. Yamabe, S. Nishimura, M. Nakao, 2011 .