Y. Akiniwa

K. Tanaka, Y. Akiniwa, S. Machiya, 2003, Micro-Nanomechatronics and Human Science, 2004 and The Fourth Symposium Micro-Nanomechatronics for Information-Based Society, 2004..

Analysis of elastic properties of textured thin films

Y. Akiniwa, S. Machiya, K. Serizawa, 2004 .

Measurement of the X-ray Elastic Constants of Amorphous Polycarbonate

Y. Akiniwa, Y. Kawamura, 2020, Quantum Beam Science.

Experimental and computational analyses on fatigue fracture and microstructure in dissimilar metal weldments with circular sharp stress raiser

Y. Akiniwa, Gyoko Oh, Takumi Sasaki, 2020 .

X-Ray Measurement of Residual Stress Distribution in Sputtered Cu Thin Films

Y. Akiniwa, Takuhisa Sakaue, 2012 .

Measurement of Residual Stress Distribution in Sputtered Cu Thin Films by X-Ray Method

Y. Akiniwa, H. Kimura, Takuhisa Sakaue, 2009 .

Evaluation of Film Property and Strength in Hexagonal AlN Thin Film

Takuya Watanabe, Y. Akiniwa, 2012 .

Prediction of notch fatigue threshold based on R-curve method

Y. Akiniwa, Keisuke Tanaka, Luoming Zhang, 1996 .

Prediction of Low-Cycle Fatigue Crack Development of Sputtered Cu Thin Film Using Deep Convolutional Neural Network

Y. Akiniwa, Michiaki Kamiyama, Kazuteru Shimizu, 2022, International Journal of Fatigue.

Fatigue damage evaluation in SiCp/2024 by X-ray diffraction method

Y. Akiniwa, Keisuke Tanaka, S. Machiya, 2006 .

Residual Stress Evaluation of Short-Fiber Reinforced Plastics by X-Ray Diffraction

Y. Akiniwa, Keisuke Tanaka, Y. Koike, 2014 .

A New Method of X-Ray Measurement of Residual Stress in Short-Fiber Reinforced Plastics

Y. Akiniwa, Keisuke Tanaka, N. Egami, 2014 .

Diffraction Measurements of Residual Macrostress and Microstress Using X-Rays, Synchrotron and Neutrons

Y. Akiniwa, Keisuke Tanaka, 2004 .

Changes of Internal Stress in Solid-Oxide Fuel Cell During Red-Ox Cycle Evaluated by In Situ Measurement With Synchrotron Radiation

Y. Akiniwa, Keisuke Tanaka, H. Sumi, 2006 .

ESTIMATION OF TORSIONAL FATIGUE STRENGTH OF MEDIUM CARBON STEEL BARS WITH A CIRCUMFERENTIAL CRACK BY THE CYCLIC RESISTANCE‐CURVE METHOD

Y. Akiniwa, Keisuke Tanaka, Hc Yu, 1998 .

Prediction of Fatigue Crack Propagation Path from a Pre-Crack under Combined Torsional and Axial Loading

Y. Akiniwa, Keisuke Tanaka, Hiroki Takahashi, 2005 .

In Situ Synchrotron Measurement of Internal Stresses in Solid-Oxide Fuel Cell during Red-Ox Cycle

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2008 .

Residual Stress of Aluminum Thin Films Sputtered on Silicon Wafers Measured by X-Ray Diffraction

Y. Akiniwa, Keisuke Tanaka, K. Ishihara, 1995 .

Evaluation of material properties of SiC particle reinforced aluminum alloy composite using neutron and X-ray diffraction

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2006 .

Stress Measurement of Silicon Carbide Particulate Reinforced Aluminum Alloy by Time-of-Flight Neutron Diffraction

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2005 .

Smart structure for suppression of mode I and II crack propagation in CFRP laminates by shape memory alloy TiNi actuator

Hiroshi Tanaka, Y. Akiniwa, Keisuke Tanaka, 2006 .

Propagation of Fatigue Crack and Measurement of Fiber Bridging Stress in SCS-6/Ti-15-3 Composite

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2005 .

Modelling of small fatigue crack growth interacting with grain boundary

Robert P. Wei, Yoshiaki Akiniwa, Yoshikazu Nakai, 1986 .

Analysis on Residual Stress Distribution in Oxidized Thermal Barrier Coatings

Y. Akiniwa, Keisuke Tanaka, Kenji Suzuki, 2005 .

Oxidization of Thermal Barrier Coatings and Spalling Stress Analyzed with Synchrotron X-Rays

Y. Akiniwa, Keisuke Tanaka, Kenji Suzuki, 2004 .

In-Situ Stress Measurement of Bond Coatings at High Temperature by High-Energy Synchrotron X-Rays

Y. Akiniwa, Keisuke Tanaka, Kenji Suzuki, 2003 .

R-curve behavior in fracture of notched porous ceramics

Keisuke Tanaka, Hirohisa Kimachi, Yasuki Kita, 2003 .

Fatigue Crack Initiation Behavior in Ultrafine-Grained Steel Observed by AFM and EBSP

T. Ishikawa, Y. Akiniwa, Keisuke Tanaka, 2004 .

Microstructural effects on crack closure and propagation thresholds of small fatigue cracks

Keisuke Tanaka, Yoshiaki Akiniwa, Y. Akiniwa, 2001 .

Influence of Strain Distribution in X-Ray Irradiated Area on Diffraction Profile

Y. Akiniwa, M. Amano, 2012 .

Residual Stress Measurement of Shrink Fitted Component in Textured Al Alloy by Neutron Diffraction Method

M. Hayashi, Y. Akiniwa, Keisuke Tanaka, 2005 .

Misorientation analysis of plastic deformation of austenitic stainless steel by EBSD and X-ray diffraction methods

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2005 .

4.06 - Modeling of fatigue crack growth

K. Tanaka, Y. Akiniwa, 2007 .

Influence of Measurement Conditions on the Accuracy of Measured Stress Using X-ray 2D Detector

Y. Akiniwa, M. Tominaga, 2014 .

Evaluation of Residual Stress Distribution in Shot-Peened Steel by Synchrotron Radiation

Y. Akiniwa, Keisuke Tanaka, Kenji Suzuki, 2003 .

Measurement of Residual Stress Distribution by Strain Scanning Method using High Energy X-rays from Synchrotron Source

Y. Akiniwa, Keisuke Tanaka, Kenji Suzuki, 2005 .

Design of Engineering Diffractometer at J-PARC

Y. Akiniwa, Y. Morii, S. Torii, 2006 .

High-temperature and high-pressure in situ SCC device for synchrotron radiation diffraction experiments and application using an austenitic stainless steel.

H. Tsubakino, T. Shobu, Y. Akiniwa, 2006, Journal of synchrotron radiation.

Re‐evaluation of formulae for X‐ray stress analysis in polycrystalline specimens with fibre texture: experimental confirmation

Y. Akiniwa, J. Harada, R. Yokoyama, 2009 .

In-situ measurements of internal stresses in copper thin films during thermal cycling using synchrotron X-rays

K. Tanaka, Y. Akiniwa, 2004, Micro-Nanomechatronics and Human Science, 2004 and The Fourth Symposium Micro-Nanomechatronics for Information-Based Society, 2004..

Fatigue Crack Propagation in Lead-Free Solder under Mode I and II Loading

Y. Akiniwa, Keisuke Tanaka, Y. Iwata, 2009 .

Mechanisms and Mechanics of Fatigue Fracture of Steels

Y. Nakai, Y. Akiniwa, Keisuke Tanaka, 1993 .

Propagation and non-propagation of small fatigue cracks

Keisuke Tanaka, Yoshiaki Akiniwa, Y. Akiniwa, 1989 .

Nondestructive evaluation of residual stress in short-fiber reinforced plastics by x-ray diffraction

Keisuke Tanaka, Noboru Egami, Syouhei Tokoro, 2014, Experimental Mechanics.

Fatigue thresholds of discontinuously reinforced aluminum alloy correlated to tensile strength

K. Shimizu, Y. Akiniwa, Keisuke Tanaka, 2000 .

Elastic Constants and X-Ray Stress Measurement of Cubic Thin Films with Fiber Texture

Y. Akiniwa, Keisuke Tanaka, Kaoru Inoue, 1999 .

Least-squares refinement of biaxial stress components and unit-cell parameter in a 〈111〉 textured cubic TiN polycrystalline thin film by X-ray diffraction

Y. Akiniwa, J. Harada, R. Yokoyama, 2010, Powder Diffraction.

Estimation of Residual Stress and Strength in Fiber-Textured TiN Hard Thin Film

Takuya Watanabe, Y. Akiniwa, H. Kimura, 2009 .

Influence of Microstructure on Bending Strength of Hot-Deformed Nd-Fe-B Magnets

Y. Akiniwa, T. Ono, Y. Kojima, 2013 .

Microscopic Analysis by EBSD Method on Fatigue Crack Propagation Behaviour in Ultrafine-Grained Copper

Y. Akiniwa, H. Kimura, Y. Kojima, 2009 .

Fatigue Damage Mechanism of Nanocrystals in ECAP-Processed Copper Investigated by EBSD and AFM Hybrid Methods

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2007 .

X-Ray Evaluation of Deformation Damage in Electrodeposited Copper Foil under Tensile and Fatigue Loading

Y. Akiniwa, Keisuke Tanaka, K. Aoki, 2006 .

Statistical characteristics of propagation of small fatigue cracks in smooth specimens of aluminium alloy 2024-T3

Yoshiaki Akiniwa, Y. Akiniwa, Katsushi Tanaka, 1988 .

Effect of Mean Stress on Fatigue Strength of Short Glass Fiber Reinforced Polybuthyleneterephthalate

Y. Akiniwa, Keisuke Tanaka, Ryoichi Narita, 2007 .

Mean-Stress Effect on Fatigue Strength of Short Glass Fiber Reinforced Polybuthyleneterephthalate

Y. Akiniwa, Keisuke Tanaka, Ryoichi Narita, 2006 .

Residual Stress Distribution in the Sub-Surface Region of Shot-Peened Ceramics

Y. Akiniwa, Keisuke Tanaka, Yusuke Morishita, 2005 .

Stress Measurement near Surface Region by Strain Scanning Method Using Neutron Diffraction

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2006 .

Neutron diffraction measurements of residual stresses in engineering materials and components

M. Hayashi, Y. Akiniwa, Keisuke Tanaka, 2002 .

Fatigue Tests of Thin Stainless Steel Sheets Under Bending at Ultrasonic Frequency

Y. Akiniwa, H. Kimura, H. Tsuru, 2008 .

Evaluation for Gigacycle Fatigue Strength of Alloy Tool Steel

Y. Akiniwa, Keisuke Tanaka, N. Miyamoto, 2005 .

Evaluation of Fatigue Strength in Very-long Life Regime of SNCM439 Steels

Y. Akiniwa, Keisuke Tanaka, Akira Nakatsu, 2004 .

Gigacycle Fatigue Properties Evaluation for Martensitic Stainless Steels by Using Ultrasonic Fatigue Tests (Study for Materials with Different Level of Inclusion Size)

Y. Akiniwa, Keisuke Tanaka, N. Miyamoto, 2004 .

Bending fatigue behaviour and microstructure in welded high-strength bolt structures

Y. Akiniwa, Gyoko Oh, 2018, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

X-ray study of lattice strain in piezoelectric ceramics (PZT)

Y. Akiniwa, Keisuke Tanaka, Y. Sakaida, 1999 .

X-Ray Study on Deformation and Fracture of Solid. Effect of Polarization on Deformation and Fracture of Piezoelectric Ceramics.

Y. Akiniwa, Keisuke Tanaka, K. Mizuno, 2002 .

Dependence of strength and fracture behavior on chemical compositions in spot-welded L-type joints

Y. Akiniwa, H. Hamatani, Miyazaki Yasunobu, 2015 .

Propagation and closure of small cracks in SiC particulate reinforced aluminum alloy in high cycle and low cycle fatigue

K. Shimizu, Y. Akiniwa, Keisuke Tanaka, 1996 .

X-Ray Study of Mechanical Properties of TiN Thin Films Coated on Steel by Ion Beam Mixing Method

Y. Akiniwa, Keisuke Tanaka, T. Ishii, 2003 .

PROPAGATION AND CLOSURE OF SHORT FATIGUE CRACKS AT NOTCHES UNDER COMPRESSIVE MEAN STRESSES

Y. Akiniwa, N. Taniguchi, K. Tanaka, 1988 .

In-situ Measurement of Internal Stresses in Solid Oxide Fuel Cells during Thermal Cycling by Synchrotron Radiation

Y. Akiniwa, Keisuke Tanaka, H. Sumi, 2005 .

X-RAY MEASUREMENT OF RESIDUAL STRESSES IN SINTERED SILICON NITRIDE.

Y. Akiniwa, Keisuke Tanaka, T. Kurimura, 1987 .

ELASTIC CONSTANTS OF SINTERED ALUMINA FOR X-RAY STRESS MEASUREMENT.

Y. Akiniwa, Keisuke Tanaka, T. Kurimura, 1987 .

X-Ray Stress Measurement of Hexagonal Polycrystals with[001]Fiber Texture

Y. Akiniwa, Keisuke Tanaka, 1998 .

X-RAY STRESS MEASUREMENT OF SINTERED ALUMINA.

Y. Akiniwa, Keisuke Tanaka, E. Matsui, 1986 .

Molecular dynamics analysis for fracture behaviour of single crystal silicon thin film with micro notch

Tomoyuki Fujii, Yoshiaki Akiniwa, Y. Akiniwa, 2006 .

Molecular dynamics analysis for micro notch effects of single crystal silicon thin film

Y. Akiniwa, T. Fujii, 2005, IEEE International Symposium on Micro-NanoMechatronics and Human Science, 2005.

FATIGUE STRENGTH AFFECTING FACTORS OF A TOOL STEEL UNDER ROTATING BENDING

M. Nakajima, Y. Akiniwa, S. Harada, 1992 .

X-ray residual stress measurement of gas-soft nitrided steels

Y. Akiniwa, Keisuke Tanaka, Q. Gu, 1996 .

Prediction of Residual Stress Distribution in Severe Surface Deformed Steel by Constant Penetration Depth Method

Y. Akiniwa, H. Kimura, Y. Kojima, 2008 .

Very High Cycle Fatigue Behavior of High Strength Steels

Y. Akiniwa, Keisuke Tanaka, N. Miyamoto, 2006 .

Effects of Fiber Content and Fiber Orientation on Fatigue Strength of Short-Fiber Reinforced Plastic

S. Harada, Y. Akiniwa, M. Nakano, 1992 .

J-INTEGRAL APPROACH TO MODE III FATIGUE CRACK PROPAGATION IN STEEL UNDER TORSIONAL LOADING

Y. Akiniwa, Keisuke Tanaka, H. Nakamura, 1996 .

Elastic-Plastic Fatigue Crack Propagation under Mixed-Mode(I+III) Cyclic Torsion and Axial Loading

Y. Akiniwa, Keisuke Tanaka, Hirohisa Kimachi, 2013 .

Mode III Fatigue Crack Propagation in Steel Under Cyclic Torsional Loading

K. Tanaka, Y. Akiniwa, H. Nakamura, 1996 .

Fatigue crack propagation under mixed mode I

K. Tanaka, Y. Akiniwa, K. Tanaka, 1996 .

Fatigue Crack Propagation in Circumferentially Pre-Cracked Steel Bars under Torsional and Axial Loadings.

Y. Akiniwa, Keisuke Tanaka, Hirofumi Nakamura, 1997 .

Notch effect on fatigue strength of porous ceramics

Y. Akiniwa, Keisuke Tanaka, Yasuki Kita, 2005 .

Crack propagation in notched specimens of porous silicon carbide under cyclic loading

Y. Akiniwa, Keisuke Tanaka, M. Segawa, 2003 .

X-ray microbeam evaluation of domain switching near fatigue cracks in piezoelectric ceramics (PZT)

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2007 .

Bending Strength of Smooth and Notched Specimens of Porous Silicon Carbide.

Y. Akiniwa, Keisuke Tanaka, T. Nomura, 1999 .

Fatigue Crack Propagation under Combined Cyclic Mechanical Loading and Electric Field in Piezoelectric Ceramics

Y. Akiniwa, Keisuke Tanaka, Hirokatsu Mukai, 2006 .

Effect of Polarization on Deformation and Fracture of Tetragonal PZT( Materials Evaluation by X-ray and Neutron Diffractions)

Y. Akiniwa, Keisuke Tanaka, K. Shirakihara, 2002 .

Brittle Fracture Analysis of Porous Ceramics Based on Initiation of Micro Damages

Y. Akiniwa, T. Fujii, Takafumi Amata, 2007 .

High Space-Resolutive Evaluation of Subsurface Stress Distribution by Strain Scanning Method with Analyzer Using High-Energy Synchrotron X-Rays ∗

T. Shobu, Y. Akiniwa, Keisuke Tanaka, 2006 .

Evaluation of Local Stress Distribution Near Notch and Crack Tips in Al2O3 by Synchrotron Radiation

Y. Akiniwa, Keisuke Tanaka, Y. Sawaki, 2005 .

Fracture Analysis of Brittle Materials based on Initiation and Coalescence of Micro Damages

Y. Akiniwa, Keisuke Tanaka, T. Fujii, 2004 .

Evaluation of Fracture Strength of Notched Porous Ceramics Based on R-Curve Method

Y. Akiniwa, Keisuke Tanaka, E. Sato, 2003 .

Dependence of strength and fracture behaviour on chemical compositions in spot-welded L-type joints

Y. Akiniwa, H. Hamatani, S. Furusako, 2017 .

X-Ray Study on Lattice Strain and Domain Switching Induced in Rhombohedral PZT by Poling and External Loading

Y. Akiniwa, Keisuke Tanaka, Y. Sakaida, 2002 .

DYNAMIC MEASUREMENT OF CRACK CLOSURE BEHAVIOUR OF SMALL FATIGUE CRACKS BY AN INTERFEROMETRIC STRAIN/DISPLACEMENT GAUGE WITH A LASER DIODE

S. Harada, Y. Fukushima, Y. Akiniwa, 1991 .

Fatigue thresholds of holed components under in-phase and out-of-phase torsional and axial loadings

Y. Akiniwa, Keisuke Tanaka, K. Morita, 2008 .

Prediction of Fatigue Thresholds of Steels with Surface Defects

M. Wakita, Y. Akiniwa, Keisuke Tanaka, 2008 .

Resistance-Curve Method for Predicting Fatigue Thresholds in Holed Specimens under Combined Torsional-Axial Loading

M. Wakita, Y. Akiniwa, Keisuke Tanaka, 2006 .

A constant incidence angle method to estimate the subsurface distribution of residual stress by high-energy X-rays from synchrotron radiation source

Y. Akiniwa, Keisuke Tanaka, K. Arai, 2002 .

Fatigue crack propagation from a hole in tubular specimens under axial and torsional loading

Y. Akiniwa, Keisuke Tanaka, Hiroki Takahash, 2006 .