C. Boehlert

发表

On the correlation between plastic strain and misorientation in polycrystalline body-centered-cubic microstructures with an emphasis on the grain size, loading history, and crystallographic orientation

T. Bieler, V. Khademi, C. Boehlert, 2021 .

Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn

T. Bieler, C. Boehlert, M. Crimp, 2015 .

Analysis of the Deformation Behavior in Tension and Tension-Creep of Ti-3Al-2.5V (wt pct) at 296 K and 728 K (23 °C and 455 °C) Using InSitu SEM Experiments

T. Bieler, C. Boehlert, M. Crimp, 2014, Metallurgical and Materials Transactions A.

Slip System Characterization of Inconel 718 Using In-Situ Scanning Electron Microscopy

C. Boehlert, H. Li, Leyun Wang, 2010 .

The Effect of Thermomechanical Processing on the Tensile, Fatigue, and Creep Behavior of Magnesium Alloy AM60

C. Boehlert, T. Watkins, J. Huang, 2011 .

The effect of processing on the 455 °C tensile and fatigue behavior of boron-modified Ti-6Al-4V

E. A. Payzant, Wei Chen, C. Boehlert, 2010 .

The elevated-temperature fatigue behavior of boron-modified Ti-6Al-4V(wt.%) castings

Wei Chen, C. Boehlert, 2008 .

Comparison of the deformation behaviour of commercially pure titanium and Ti–5Al–2.5Sn(wt.%) at 296 and 728 K

T. Bieler, C. Boehlert, M. Crimp, 2013 .

Examination of the distribution of the tensile deformation systems in tension and tension-creep of Ti-6Al-4V (wt.%) at 296 K and 728 K

T. Bieler, C. Boehlert, M. Crimp, 2015 .

The Distribution of The Deformation Systems in Tension in Alpha and Alpha+Beta Titanium Alloys at Temperatures Ranging Between 296K‐728K

T. Bieler, C. Boehlert, M. Crimp, 2016 .

Anomalous Tension Twinning Activity in Extruded Mg Sheet During Hard-Orientation Loading at Room Temperature

C. Boehlert, D. Yin, Y. Chai, 2021, Metallurgical and Materials Transactions A.

Initial electron backscattered diffraction observations of a plutonium alloy

C. Boehlert, R. Schulze, Jeremy Mitchell, 2001 .

The effect of Y and Nd additions on the microstructure and creep behavior of AZ80

C. Boehlert, G. Quan, L. Ren, 2021 .

The impression creep behavior and microstructure evolution of cast and cast-then-extruded Mg–10Gd–3Y–0.5Zr (wt%)

Qudong Wang, W. Ding, C. Boehlert, 2016 .

Analysis of the Microstructure and Properties of Friction stir Weld Zones in the Al 2139-T8 Alloy

C. Yen, C. Boehlert, J. Yu, 2014 .

The tensile and creep behavior of Mg–Zn Alloys with and without Y and Zr as ternary elements

C. Boehlert, 2007 .

Metal hybrids processed by high-pressure torsion: synthesis, microstructure, mechanical properties and developing trends

C. Boehlert, M. Kawasaki, D. Hernández-Escobar, 2021, International Materials Reviews.

Effect of post-deformation annealing on the microstructure and micro-mechanical behavior of Zn–Mg hybrids processed by High-Pressure Torsion

C. Boehlert, R. Unocic, M. Kawasaki, 2020 .

Actuation Dependency of Frequency Tuning in MEMS Resonators

C. Boehlert, N. Sepúlveda, Yunqi Cao, 2020, Journal of Microelectromechanical Systems.

In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn + 0.8 vol pct TiB2

J. Llorca, C. Boehlert, M. Pérez-Prado, 2012, Metallurgical and Materials Transactions A.

Biocompatibility and mechanical properties of diamond-like coatings on cobalt-chromium-molybdenum steel and titanium-aluminum-vanadium biomedical alloys.

C. Boehlert, C. Hinüber, H. Scheibe, 2010, Journal of biomedical materials research. Part A.

Processing effects on the grain-boundary character distribution of the orthorhombic phase in Ti-Al-Nb alloys

C. Boehlert, Dingqiang Li, C. J. Boehlert, 2005 .

Microstructure, tensile, and creep behavior of O + BCC Ti2AlNb alloys processed using induction-float-zone melting

C. Boehlert, J. Bingert, 2001 .

Current status and perspectives of zinc-based absorbable alloys for biomedical applications.

C. Boehlert, H. Hermawan, H. Yilmazer, 2019, Acta biomaterialia.

Biocompatibility Evaluation of Ti–15Al–33Nb(at%) and Ti–21Al–29Nb(at%)

C. Boehlert, Lisa M. Flick, Katherine A. Rider, 2005 .

Strength enhancement of an aluminum alloy through high pressure torsion

Shigeo Sato, C. Boehlert, H. Yilmazer, 2019, Materials Science and Engineering: A.

The effects of forging and rolling on microstructure in O+BCC TiAlNb alloys

C. Boehlert, 2000 .

A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties

F. Prima, C. Boehlert, A. Devaraj, 2022, International Materials Reviews.

Abnormal Deformation Behavior of Oxygen-Modified β-Type Ti-29Nb-13Ta-4.6Zr Alloys for Biomedical Applications

V. Khademi, C. Boehlert, M. Niinomi, 2016, Metallurgical and Materials Transactions A.

Titanium Alloys for Biomedical Applications

C. Boehlert, M. Niinomi, 2015 .

Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by High-Pressure Torsion

C. Boehlert, Z. Rahman, M. Kawasaki, 2018, Philosophical Magazine.

Texture induced anisotropy in extruded Ti–6Al–4V–xB alloys

Wei Chen, C. Boehlert, 2011 .

Out-of-phase thermomechanical fatigue of monolithic titanium alloys

C. Boehlert, 1993 .

The out-of-phase thermomechanical fatigue behavior of Ultra SCS-6/Ti–24Al–17Nb–xMo (at.%) metal matrix composites

C. Boehlert, J. Quast, 2010 .

Analysis of slip activity and heterogeneous deformation in tension and tension-creep of Ti–5Al–2.5Sn (wt %) using in-situ SEM experiments

T. Bieler, C. Boehlert, M. Crimp, 2012 .

Analysis of slip transfer and deformation behavior across the α/β interface in Ti–5Al–2.5Sn (wt.%) with an equiaxed microstructure

T. Bieler, C. Boehlert, M. Crimp, 2012 .

4.21 Intermetallic Matrix Composites

C. Boehlert, D. Miracle, 2018 .

Out-of-phase thermomechanical fatigue of titanium composite matrices

C. Boehlert, D. Eylon, S. Russ, 1995 .

Assessment of in situ TiB whisker tensile strength and optimization of TiB-reinforced titanium alloy design

C. Boehlert, D. Miracle, W. Curtin, 2009 .

In situ scanning electron microscopy observations of tensile deformation in a boron-modified Ti–6Al–4V alloy

Daniel B. Miracle, Seshacharyulu Tamirisakandala, C. Boehlert, 2006 .

The tensile and tensile-creep deformation behavior of Ti–8Al–1Mo–1V(wt%)

T. Bieler, V. Khademi, C. Boehlert, 2015 .

Methodology for estimating the critical resolved shear stress ratios of α-phase Ti using EBSD-based trace analysis

Thomas R. Bieler, Martin A. Crimp, T. Bieler, 2013 .

Part I. The microstructural evolution in Ti-Al-Nb O+Bcc orthorhombic alloys

B. Majumdar, C. Boehlert, D. Miracle, 1999 .

Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg–Y sheets

C. Boehlert, D. Yin, J. Zheng, 2021 .

Analysis of crystallographic slip and grain boundary sliding in a Ti–45Al–2Nb–2Mn (at%)–0.8 vol%TiB2 alloy by high temperature in situ mechanical testing

J. Llorca, C. Boehlert, J. Torralba, 2014 .

The Elevated-Temperature Strength Enhancement of a Low-Cost β Titanium Alloy Through Thermomechanically-Induced Phase Transformation

V. Khademi, C. Boehlert, D. Hernández-Escobar, 2019, JOM.

Microstructure, creep, and tensile behavior of a Ti–12Al–38Nb (at.%) beta+orthorhombic alloy

C. Boehlert, 1999 .

Structure-property relationships and deformation mechanisms in an orthorhombic based Ti-25Al-17Nb alloy

B. Majumdar, C. Boehlert, D. Miracle, 1994 .

Effect of Boron on the Elevated-Temperature Tensile and Creep Behavior of Cast Ti-6Al-2Sn-4Zr-2Mo-0.1Si (Weight Percent)

C. Boehlert, W. Chen, 2009 .

Part II. The creep behavior of Ti-Al-Nb O+bcc orthorhombic alloys

C. Boehlert, D. Miracle, 1999 .

The Deformation Behavior of Oxygen-Modified Ti-29Nb-13Ta-4.6Zr(wt.%)

V. Khademi, C. Boehlert, M. Niinomi, 2020, MATEC Web of Conferences.

A universal shear-lag model for accurate assessment of whisker load-transfer strengthening in metal matrix composites

Yuanfei Han, Guangfa Huang, Weijie Lu, 2022, Composites Part B: Engineering.

TiB whisker induced variant selection in titanium matrix composites

Yuanfei Han, Guangfa Huang, C. Boehlert, 2022, Scripta Materialia.

Elevated-Temperature Mechanical Behavior of As-Cast and Wrought Ti-6Al-4V-1B

E. A. Payzant, C. Boehlert, J. Howe, 2011 .

Characterization of the Microstructure, Tensile and Creep Behavior of Powder Metallurgy Processed and Rolled Ti-6Al-4V-1B Alloy

Wei Chen, C. Boehlert, 2010 .

The Elevated-Temperature Creep Behavior of Boron-Modified Ti-6Al-4V Alloys

Wei Chen, C. Boehlert, 2009 .

The creep behavior of powder-metallurgy processed Ti–6Al–4V–1B(wt.%)

C. Boehlert, 2009 .

Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium

C. Boehlert, M. Pérez-Prado, J. Bohlen, 2013 .

Microstructure, creep, and tensile behavior of a Ti–21Al–29Nb(at.%) orthorhombic+B2 alloy

C. Boehlert, C. Cowen, 2006 .

The 455 °C tensile and fatigue behavior of boron-modified Ti-6Al-2Sn-4Zr-2Mo-0.1Si(wt.%)

Wei Chen, C. Boehlert, 2010 .

A microstructure and sonic fatigue investigation of Ti–TiB functionally graded materials

Travis A. Wyen, C. Boehlert, E. Tuegel, 2008 .

Sonic Fatigue Testing of a Functionally Graded Ti/TiB Material

L. Byrd, C. Boehlert, E. Tuegel, 2008 .

The evolution of grain-boundary cracking evaluated through in situ tensile-creep testing of Udimet alloy 188

C. Boehlert, S. Wright, M. Nowell, 2008 .

Part III. The tensile behavior of Ti-Al-Nb O+Bcc orthorhombic alloys

C. Boehlert, 2001 .

The effect of thermomechanical processing on the creep behavior of Alloy 690

C. Boehlert, 2008 .

Composition-Dependent Microstructure-Property Relationships of Fe and Al Modified Ti-12Cr (wt.%)

C. Boehlert, A. Devaraj, E. Kautz, 2019, JOM.

Electron backscatter diffraction of a plutonium-gallium alloy

C. Boehlert, R. Schulze, J. Mitchell, 2003 .

The phase evolution, mechanical behavior, and microstructural instability of a fully-lamellar Ti–46Al(at.%) alloy

D. Dimiduk, C. Boehlert, K. Hemker, 2002 .

The Microstructure Evolution and Deformation Behavior of AZ80 During Gradient Increment Cyclic Loading

C. Boehlert, G. Quan, L. Ren, 2018, Metallurgical and Materials Transactions A.

The microstructure, tensile properties, and creep behavior of Mg-Zn alloys containing 0-4.4 wt.% Zn

C. Boehlert, K. Knittel, 2006 .

Creep and Fracture Behavior of Peak-Aged Mg-11Y-5Gd-2Zn-0.5Zr (wt pct)

Qudong Wang, C. Boehlert, D. Yin, 2012, Metallurgical and Materials Transactions A.

The Small Fatigue Crack Growth Behavior of an AM60 Magnesium Alloy

A. Shyam, C. Boehlert, R. Decker, 2012, Metallurgical and Materials Transactions A.

The effect of microstructure and strain rate on the 25 °C and 700 °C compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8 TiB2 (vol%) alloy

C. Boehlert, I. Sabirov, J. Cornide, 2021 .

A comparison of field assisted hot pressing and hot isostatic pressing for gas atomized Ti–22Al–26Nb(at.%) and Ti–22Al–26Nb–5B(at.%) powders

C. Boehlert, I. Sabirov, J. Cornide, 2021 .

The phase evolution and microstructural stability of an orthorhombic Ti-23Al-27Nb alloy

C. Boehlert, 1999 .

Analysis of Slip Activity and Deformation Modes in Tension and Tension-Creep Tests of Cast Mg-10Gd-3Y-0.5Zr (Wt Pct) at Elevated Temperatures Using In Situ SEM Experiments

Qudong Wang, W. Ding, C. Boehlert, 2016, Metallurgical and Materials Transactions A.

Magnesium application in railway rolling stocks: A new challenge and opportunity for lightweighting

C. Boehlert, G. Quan, L. Ren, 2018, International Journal of Lightweight Materials and Manufacture.

Creep behavior of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) at 573K

Qudong Wang, W. Ding, C. Boehlert, 2012 .

The elevated-temperature mechanical behavior of peak-aged Mg–10Gd–3Y–0.4Zr Alloy

Qudong Wang, C. Boehlert, D. Yin, 2011 .

Multi-microalloying mediated grain growth and texture evolution during the high-temperature static recrystallization of AZ80 alloys

C. Boehlert, G. Quan, L. Ren, 2020 .

Eutectic phase strengthening and strain rate sensitivity behavior of AZ80 magnesium alloy

C. Boehlert, G. Quan, Yangyang Guo, 2020 .

In-Situ Study of the Tensile Deformation and Fracture Modes in Peak-Aged Cast Mg-11Y-5Gd-2Zn-0.5Zr (Weight Percent)

Qudong Wang, C. Boehlert, R. Mishra, 2016, Metallurgical and Materials Transactions A.

In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt.%) at elevated temperatures

W. Ding, C. Boehlert, D. Yin, 2016 .

In situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ31

J. Llorca, C. Boehlert, M. Pérez-Prado, 2012 .

In-situ analysis of the slip activity during tensile deformation of cast and extruded Mg-10Gd-3Y-0.5Zr (wt.%) at 250 °C

W. Ding, C. Boehlert, D. Yin, 2016 .

Tensile and compressive creep behavior of extruded Mg-10Gd-3Y-0.5Zr (wt.%) alloy

C. Boehlert, D. Yin, Jie Yuan, 2015 .

Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-24Al-17Nb-0.66Mo (Atomic Percent) and Ti-24Al-17Nb-2.3Mo (Atomic Percent) Alloys

C. Boehlert, J. Quast, 2007 .

High-pressure torsion processing of Zn–3Mg alloy and its hybrid counterpart: A comparative study

C. Boehlert, R. Unocic, M. Kawasaki, 2020 .

Swift heavy ion irradiation damage in Ti-6Al-4V and Ti-6Al-4V-1B: Study of the microstructure and mechanical properties

I. Monnet, C. Boehlert, W. Mittig, 2015 .

Tensile and fatigue evaluation of Ti–15Al–33Nb (at.%) and Ti–21Al–29Nb (at.%) alloys for biomedical applications

C. Boehlert, M. Niinomi, C. Cowen, 2005 .

Microstructure, Tensile, and Creep Behavior of Boron-Modified Ti-15Al-33Nb (at.%)

C. Boehlert, C. Cowen, 2008 .

Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-22Al-26Nb (At. Pct) and Ti-22Al-26Nb-5B (At. Pct)

C. Boehlert, C. Cowen, 2007 .

The Effect of ω- and α-Phase Precipitation on the β-Phase Lattice Parameters During 400°C aging in Ti-11Cr(at.%)

C. Boehlert, S. Misture, A. Devaraj, 2022, Microscopy and Microanalysis.

Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study

J. Llorca, C. Boehlert, M. Pérez-Prado, 2013, Metallurgical and Materials Transactions A.

Evaluation of the Fibre-Matrix Debond Strength of a Ti-22Al-23Nb (AT.%)/Trimarc Metal Matrix Composite

C. Boehlert, J. L. LeBoeuf, 2010 .

Application of the cruciform specimen geometry to obtain transverse interface-property data in a high-fiber-volume-fraction SiC/Titanium alloy composite

Daniel B. Miracle, Bhaskar S. Majumdar, B. Majumdar, 2001 .

Evaluating the Plastic Anisotropy of AZ31 Using Microscopy Techniques

C. Boehlert, Zan Hui Chen, Z. Chen, 2013, JOM.

The Effects of Solutionizing Temperature on the Microstructure of Allvac 718Plus

C. Boehlert, G. Kumari, S. Sankaran, 2020, Journal of Materials Engineering and Performance.

The effect of sheet processing on the microstructure, tensile, and creep behavior of INCONEL alloy 718

C. Boehlert, D. Dickmann, Ny. N. C. Eisinger, 2006 .

Improving the Soft Magnetic Properties of Binder Jet Printed Iron-Silicon Alloy Through Boron Addition

C. Boehlert, P. Kwon, Thang Q. Pham, 2022, SSRN Electronic Journal.

Initial electron back-scattered diffraction observations of cerium

C. Boehlert, R. Schulze, R. Pereyra, 2003 .

Effect of 0.4 wt% yttrium addition and heat treatment on the high-temperature compression behavior of cast AZ80

C. Boehlert, G. Quan, L. Ren, 2019, Journal of Materials Science.

A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™

C. Boehlert, S. C. Longanbach, 2011 .

In-situ observations of recrystallization and microstructural evolution in cerium-containing rolled magnesium alloys

C. Boehlert, D. Hernández-Escobar, A. Chakkedath, 2018, International Journal of Lightweight Materials and Manufacture.

MICROSTRUCTURAL ANALYSIS AND CREEP BEHAVIOR OF 25MM THICK FRICTION STIR WELDED AA2139-T8

C. Boehlert, Uchechi Okeke, 2018 .

Creep and rupture behavior of peak-aged Mg-11 Y-5 Gd-2 Zn-0 . 5 Zr ( wt . % )

C. Boehlert, D. Yin, Q. D. Wang, 2012 .

Fatigue and wear evaluation of Ti-Al-Nb alloys for biomedical applications

C. Boehlert, M. Niinomi, C. Cowen, 2008 .

Use of electropolishing for enhanced metallic specimen preparation for electron backscatter diffraction analysis

C. Boehlert, G. Wynick, 2005 .

Role of matrix microstructure on room-temperature tensile properties and fiber-strength utilization of an orthorhombic ti-alloy-based composite

B. Majumdar, C. Boehlert, D. Miracle, 1997 .

The grain boundary character distribution of a fully-orthorhombic Ti–25Al–24Nb(at.%) alloy

C. Boehlert, Dingqiang Li, S. Wright, 2004 .

The Microstructure, Creep, and Tensile Behavior for Ti-5Al-45Nb (Atomic Percent) Fully-β Alloy

C. Boehlert, C. Cowen, 2007 .

Electron backscattered diffraction characterization technique for analysis of a Ti2AlNb intermetallic alloy

C. Boehlert, G. L. WYNICK, 2005, Journal of microscopy.

Preface to special section on composite materials

K. Chawla, E. Lara‐Curzio, N. Chawla, 2008 .

Development of high-temperature microsample testing

Kevin J. Hemker, Marc Zupan, C. Boehlert, 2001 .

The RaDIATE High-Energy Proton Materials Irradiation Experiment at the Brookhaven Linac Isotope Producer Facility

C. Densham, E. Wakai, T. Shea, 2017 .

The Deformation Behavior, Microstructure and Mechanical Properties of Cast and Extruded Mg-1Mn-xNd (wt%) at Temperatures between 50°C and 250°C

C. Boehlert, J. Bohlen, S. Yi, 2015 .

The Effect of Nd on the Tension and Compression Deformation Behavior of Extruded Mg-1Mn (wt pct) at Temperatures Between 298 K and 523 K (25 °C and 250 °C)

C. Boehlert, J. Bohlen, S. Yi, 2014, Metallurgical and Materials Transactions A.

In situ analysis of the tensile deformation mechanisms in extruded Mg–1Mn–1Nd (wt%)

J. Llorca, C. Boehlert, M. Pérez-Prado, 2013 .

In situ SEM Observations of the Tensile-Creep Deformation Behavior and Fracture Mechanisms of a γ-TiAl Intermetallic Alloy at Low and High Stresses.

J. Llorca, C. Boehlert, M. Pérez-Prado, 2013 .

Creep and fracture behavior of as-cast Mg–11Y–5Gd–2Zn–0.5Zr (wt%)

W. Ding, C. Boehlert, D. Yin, 2012, Journal of Materials Science.

Thermal, mechanical and fluid flow aspects of the high power beam dump for FRIB

I. Monnet, C. Boehlert, R. Ronningen, 2016 .

Surface Modification of Pure Mg for Enhanced Biocompatibility and Controlled Biodegradation: A Study on Graphene Oxide (GO)/Strontium Apatite (SrAp) Biocomposite Coatings

C. Boehlert, M. Kaseem, E. Arslan, 2023, Coatings.

AN EXPERIMENTAL-COMPUTATIONAL STUDY ON THE PLASTIC DEFORMATION BEHAVIOR OF BODY-CENTERED CUBIC TITANIUM ALLOYS

V. Khademi, C. Boehlert, 2018 .

In Situ Scanning Electron Microscopy Observations of Contraction Twinning and Double Twinning in Extruded Mg-1Mn (wt.%)

C. Boehlert, A. Chakkedath, 2015 .

Contraction Twinning Dominated Tensile Deformation and Subsequent Fracture in Extruded Mg-1Mn (Wt Pct) at Ambient Temperature

C. Boehlert, P. Eisenlohr, Tias Maiti, 2018, Metallurgical and Materials Transactions A.

Evaluating the Plastic Anisotropy of AZ31 Using Microscopy Techniques

C. Boehlert, Z. Chen, 2013 .

Comparison of dislocation content measured with transmission electron microscopy and micro-Laue diffraction based streak analysis

R. Xu, T. Bieler, C. Boehlert, 2018 .

The Effect of Temperature on the Tensile Deformation Behavior of Ti‐13Cr‐1Fe‐3Al (wt. %)

V. Khademi, C. Boehlert, M. Ikeda, 2016 .

Materials Science and Engineering C: Introduction

C. Boehlert, M. Niinomi, M. Ikeda, 2005 .

The effect of molybdenum on the microstructure and creep behavior of Ti–24Al–17Nb–xMo alloys and Ti–24Al–17Nb–xMo SiC-fiber composites

C. Boehlert, J. Quast, C. J. Boehlert, 2008 .

The Microstructure and Creep Behavior of Cold Rolled Udimet 188 Sheet

C. Boehlert, S. C. Longanbach, 2010, Microscopy and Microanalysis.

Effect of thermomechanical processing on the creep behaviour of Udimet alloy 188

T. Bieler, C. Boehlert, S. C. Longanbach, 2008 .

The Effect of Cold Rolling on the Creep Behavior of Udimet 188

C. Boehlert, D. Palit, 2006, Microscopy and Microanalysis.

Phase stability and phase transformations in plutonium and plutonium-gallium alloys

C. Boehlert, M. Stan, D. Schwartz, 2004 .

Influence of interrupted cooling on the development of bimodal γ' precipitate distributions in ATI 718Plus

C. Boehlert, K. Unocic, Geeta Kumari, 2023, Journal of Materials Science.

Lattice Parameter Evolution during the β-to-α and β-to-ω Transformations of Iron- and Aluminum-Modified Ti-11Cr(at.%)

C. Boehlert, J. Ballor, J. D. Poplawsky, 2024, Crystals.

The Effect of Cold Rolling on the Grain Boundary Character and Creep Rupture Properties of INCONEL Alloy 718

C. Boehlert, J. Crum, G. Smith, 2003 .