H. Ali

发表

Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V

K. Mumtaz, H. Ali, H. Ghadbeigi, 2018 .

Effect of bed temperature on solute segregation and mechanical properties in Ti-6Al-4V produced by selective laser melting.

B. Gault, E. Jägle, T. B. Britton, 2020 .

Flow visualization in a malodor absorption system with porous baffles and a rotating disk drum via a PIV technique

H. Ali, C. Park, J. Lee, 2016 .

Effect of pre-emptive in situ parameter modification on residual stress distributions within selective laser-melted Ti6Al4V components

K. Mumtaz, H. Ali, H. Ghadbeigi, 2019, The International Journal of Advanced Manufacturing Technology.

Effect of pre-emptive in situ parameter modification on residual stress distributions within selective laser-melted Ti6Al4V components

K. Mumtaz, H. Ali, H. Ghadbeigi, 2019, The International Journal of Advanced Manufacturing Technology.

CFD and kinetic‐based modeling to optimize the sparger design of a large‐scale photobioreactor for scaling up of biofuel production

Jonathan L. Wagner, Dongda Zhang, C. Park, 2019, Biotechnology and bioengineering.

Applicability of a modified breakage and coalescence model based on the complete turbulence spectrum concept for CFD simulation of gas-liquid mass transfer in a stirred tank reactor

J. Solsvik, H. Jakobsen, H. Ali, 2020 .

Numerical multiphase modeling of CO2 absorption and desorption in microalgal raceway ponds to improve their carbonation efficiency

C. Park, H. Ali, 2017 .

Two-Phase Flow Modeling of Solid Dissolution in Liquid for Nutrient Mixing Improvement in Algal Raceway Ponds

Jonathan L. Wagner, Dongda Zhang, C. Park, 2018 .

Numerical prediction of heat transfer characteristics based on monthly temperature gradient in algal open raceway ponds

C. Park, H. Ali, T. A. Cheema, 2017 .

Numerical modeling of fluid–structure interaction between sewage water flow and bar screen to improve the screening process

H. Ali, Seung-wook Shin, K. Kim, 2018, Water and Environment Journal.

Experimental Evaluation of Particle Separation Efficiency for Dielectrophoretic Flows Passing through a Microfluidic Device

M. Kwak, C. Park, G. Noh, 2018 .

Parametric evaluation of a hydrofoil-shaped sidewall rib-employed microchannel heat sink with and without nano-encapsulated phase change material slurry as coolant

C. Park, H. Ali, A. Abbas, 2020 .

Toughening polymer surfaces

H. Ali, 2006 .

Bubble hydrodynamics and mass transfer in stirred tank with non-Newtonian fluids: Scale-up from laboratory to pilot-scale

J. Solsvik, H. Ali, 2021 .

Axial distributions of bubble–liquid mass transfer coefficient in laboratory-scale stirred tank with viscous Newtonian and non-Newtonian fluids

J. Solsvik, H. Ali, 2020 .

In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V

K. Mumtaz, H. Ali, H. Ghadbeigi, 2017 .

Numerical modeling of two‐phase bubbly flow mixing with mass transport in an effective microorganism odor removing system

C. Park, H. Ali, T. A. Cheema, 2016 .

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

K. Mumtaz, H. Ali, H. Ghadbeigi, 2018, Journal of Materials Engineering and Performance.

Deep learning‐based surrogate modeling and optimization for microalgal biofuel production and photobioreactor design

Fabio Fiorelli, Jonathan L. Wagner, Dongda Zhang, 2018, AIChE Journal.

Numerical heat transfer analysis in a two-phase microorganism malodor removing system with the effect of internal structures

Cheol Woo Park, Haider Ali, C. Park, 2017 .

Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach

Kamran Mumtaz, Haider Ali, H. Ghadbeigi, 2018 .

Evolution of Residual Stress in Ti6Al4V components fabricated using Selective Laser Melting

H. Ali, 2017 .

In-Built Customised Mechanical Failure of 316L Components Fabricated Using Selective Laser Melting

Kamran Mumtaz, Haider Ali, K. Mumtaz, 2017 .

Thermo-Fluidic Characteristics of Two-Phase Ice Slurry Flows Based on Comparative Numerical Methods

C. Park, H. Ali, S. Akhtar, 2019 .

Numerical Study on the Effects of Contraction Ratio in a Two-Phase Flow Injection Nozzle

C. Park, H. Ali, K. Kim, 2016 .

Transient Analysis of Air Bubble Rise in Stagnant Water Column Using CFD

H. Ali, A. A. Baloch, F. Tahir, 2017 .

Numerical study on the complete blood cell sorting using particle tracing and dielectrophoresis in a microfluidic device

C. Park, H. Ali, 2016, Korea-Australia Rheology Journal.

Numerical investigation on the flow mixing feature inside a continuously carbonating process tank

Kyung Won Kim, Haider Ali, Moon Kyu Kwak, 2016, Comput. Electr. Eng..

Influence of powder-bed temperature on the microstructure and mechanical properties of Ti-6Al-4V produced by selective laser melting

B. Gault, T. B. Britton, P. Bajaj, 2020, 2006.08288.

Effect of pre-emptive in situ parameter modification on residual stress distributions within selective laser-melted Ti6Al4V components

K. Mumtaz, H. Ali, H. Ghadbeigi, 2019, The International Journal of Advanced Manufacturing Technology.

Numerical prediction of algae cell mixing feature in raceway ponds using particle tracing methods

H. Yoon, H. Ali, Y. Do, 2015, Biotechnology and bioengineering.

Effective Prediction of Monthly Heat Transfer Characteristics in a Thin-Layer Cascade Reactor Subjected to Outdoor Conditions

C. Park, H. Ali, S. Akhtar, 2022, Journal of Chemistry.

Investigating the melt pool properties and thermal effects of multi-laser diode area melting

K. Groom, K. Mumtaz, H. Ali, 2018 .

Investigating the melt pool properties and thermal effects of multi-laser diode area melting

K. Groom, K. Mumtaz, H. Ali, 2018, The International Journal of Advanced Manufacturing Technology.

Effects of geometric parameters on volumetric mass transfer coefficient of non-Newtonian fluids in stirred tanks

J. Solsvik, H. Ali, Sofia Zhu, 2021, International Journal of Chemical Reactor Engineering.

A Comparative Study of Thermal Performance of Different Nanofluids: An Analytic Approach

Muhammad Saqlain Aslam, Peipei Shang, H. Ali, 2022, Symmetry.

Numerical Study of Heat and Mass Transfer for Williamson Nanofluid over Stretching/Shrinking Sheet along with Brownian and Thermophoresis Effects

H. Ali, M. Amjad, J. Raza, 2022, Energies.

Fluid–solid interaction based morphological investigation of hyperelastic stenotic structure under turbulent pulsatile flow

H. Ali, C. Park, T. A. Cheema, 2014 .

Thermal-FSI based analysis of annealing process for a steel wire in a tube furnace

Cheol Woo Park, Taqi Ahmad Cheema, Haider Ali, 2016 .

Determination of the Structural Characteristics of Microalgal Cells Walls under the Influence of Turbulent Mixing Energy in Open Raceway Ponds

Cheol Woo Park, Taqi Ahmad Cheema, Haider Ali, 2018 .