Huijun Kang

发表

Role of layered structure in ductility improvement of layered Ti-Al metal composite

H. Xie, T. Xiao, E. Maawad, 2018, Acta Materialia.

Effect of reinforcement content and aging treatment on microstructure and mechanical behavior of B4Cp/6061Al composites

P. Peng, Huijun Kang, Tongmin Wang, 2019, Materials Science and Engineering: A.

Grain nucleation and growth behavior of a Sn-Pb alloy affected by direct current: An in situ investigation

T. Xiao, Ya-nan Fu, Huijun Kang, 2017 .

A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

Huijun Kang, Tongmin Wang, Tingju Li, 2014, Scientific Reports.

A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryorolling and intermediate aging treatment

Wei Wang, Huijun Kang, Tongmin Wang, 2017 .

In situ synchrotron X-ray imaging on morphological evolution of dendrites in Sn–Bi hypoeutectic alloy under electric currents

T. Xiao, Ya-nan Fu, Huijun Kang, 2014 .

Microstructures, mechanical properties, and aging behavior of hybrid-sized TiB2 particulate-reinforced 2219 aluminum matrix composites

Huijun Kang, Tongmin Wang, M. Gao, 2021, Materials Science and Engineering: A.

Combining effects of TiB2 and La on the aging behavior of A356 alloy

Huijun Kang, Tongmin Wang, Zongning Chen, 2015 .

Development of TiB2 reinforced aluminum foundry alloy based in situ composites – Part II: Enhancing the practical aluminum foundry alloys using the improved Al–5 wt%TiB2 master composite upon dilution

Huijun Kang, Tongmin Wang, Zongning Chen, 2014 .

Effect of traveling magnetic field on solute distribution and dendritic growth in unidirectionally solidifying Sn–50 wt%Pb alloy: An in situ observation

T. Xiao, Huijun Kang, Tongmin Wang, 2016 .

Correlation between microstructures and mechanical properties of cryorolled CuNiSi alloys with Cr and Zr alloying

Wei Wang, C. Zou, Huijun Kang, 2018, Materials Characterization.

Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process

Huijun Kang, Tongmin Wang, M. Gao, 2021 .

Electrochemical corrosion mechanisms of nickel-aluminium bronze with different nickel contents using the rotating disc electrode

Wei Wang, Huijun Kang, Tongmin Wang, 2019, Corrosion Science.

In vitro investigation on microstructure, bio-corrosion properties and cytotoxicity of as-extruded Mg–5Sn–xIn alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2021 .

Bioinspired superhydrophobic surface via one-step electrodeposition and its corrosion inhibition for Mg-Li alloy

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

Processing bulk insulating CaTiO3 into a high-performance thermoelectric material

Huijun Kang, Tongmin Wang, Zongning Chen, 2022 .

XtalCAMP: a comprehensive program for the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data

N. Tamura, H. Wenk, Yao Li, 2020, Journal of Applied Crystallography.

Influence of Cryorolling on the Precipitation of Cu–Ni–Si Alloys: An In Situ X-ray Diffraction Study

Wei Wang, Huijun Kang, Tongmin Wang, 2018, Acta Metallurgica Sinica (English Letters).

First-principles calculations and high thermoelectric performance of La–Nb doped SrTiO3 ceramics

Huijun Kang, Tongmin Wang, L. Miao, 2019, Journal of Materials Chemistry A.

Effect of Nb doping on microstructures and thermoelectric properties of SrTiO 3 ceramics

Huijun Kang, Tongmin Wang, Xiong Yang, 2018 .

Direct preparation of La-doped SrTiO3 thermoelectric materials by mechanical alloying with carbon burial sintering

Huijun Kang, Tongmin Wang, Zongning Chen, 2018 .

Real-time Observation on Coarsening of Second-Phase Droplets in Al–Bi Immiscible Alloy Using Synchrotron Radiation X-ray Imaging Technology

T. Xiao, Ya-nan Fu, Huijun Kang, 2015, Acta Metallurgica Sinica (English Letters).

Crystal–quasicrystal transition depending on cooling rates in directionally solidified Al–3Mn–7Be (at.%) alloy

Yan-qing Su, Jingjie Guo, H. Fu, 2014 .

A promising structure for fabricating high strength and high electrical conductivity copper alloys

G. Fan, Huijun Kang, Tongmin Wang, 2016, Scientific Reports.

Study of enhanced dry sliding wear behavior and mechanical properties of Cu-TiB2 composites fabricated by in situ casting process

Wei Wang, Huijun Kang, Tongmin Wang, 2017 .

Microstructure and properties of dual-scale particulate reinforced copper matrix composites with superior comprehensive properties

Huijun Kang, Tongmin Wang, Zongning Chen, 2020 .

Ultrasound-Assisted Solidification of a Cu–Cr Alloy

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Acta Metallurgica Sinica (English Letters).

Corrosion behavior of as-cast Mg–5Sn based alloys with In additions in 3.5 wt% NaCl solution

Huijun Kang, Tongmin Wang, Zongning Chen, 2020 .

Effect of Crystal Orientation on Seebeck Coefficient and Electrical Conductivity of SrTiO3 Single Crystals

Huijun Kang, Tongmin Wang, Xiaodong Li, 2021 .

Significantly Improved Thermoelectric Properties of Nb-doped ZrNiSn Half-Heusler compounds

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Chemical Engineering Journal.

Enhancement in thermoelectric properties of ZrNiSn-based alloys by Ta doping and Hf substitution

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Acta Materialia.

Identification of the Intrinsic Atomic Disorder in ZrNiSn-based Alloys and Their Effects on Thermoelectric Properties

Huijun Kang, Tongmin Wang, Zongning Chen, 2020 .

Entropy engineering induced low thermal conductivity in medium-entropy (Zr, Ti, Hf)CoSb triple half-Heusler compounds

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Materialia.

Record high thermoelectric performance in bulk SrTiO3 via nano-scale modulation doping

Huijun Kang, Tongmin Wang, Jingfeng Li, 2017 .

Simulation Study of Al-1Mn/Al-10Si Circular Clad Ingots Prepared by Direct Chill Casting

Huijun Kang, Tongmin Wang, Y. Fu, 2016, Metallurgical and Materials Transactions B.

Horizontal continuous casting process under electromagnetic field for preparing AA3003/AA4045 clad composite hollow billets

Huijun Kang, Tongmin Wang, Zongning Chen, 2015 .

3-D morphology and growth mechanism of primary Al6Mn intermetallic compound in directionally solidified Al-3at.%Mn alloy

Yan-qing Su, Jingjie Guo, H. Fu, 2012 .

Formation mechanism of TiB2 nanoparticles and development of TiB2p/6201 nanocomposites as a neoteric conducting material

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Journal of Alloys and Compounds.

Entropy-driven multiscale defects enhance the thermoelectric properties of ZrCoSb-based half-Heusler alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Chemical Engineering Journal.

Emerging Homogeneous Superlattices in CaTiO3 Bulk Thermoelectric Materials

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Materials Horizons.

Improving the tensile ductility of metal matrix composites by laminated structure: A coupled X-ray tomography and digital image correlation study

T. Xiao, G. Fan, L. Geng, 2017 .

Development of an 8090/3003 bimetal slab using a modified direct-chill casting process

Huijun Kang, Tongmin Wang, Zongning Chen, 2014 .

Deformation behavior and damage in B4Cp/6061Al composites: An actual 3D microstructure-based modeling

P. Peng, Huijun Kang, Tongmin Wang, 2020 .

Grain refinement of hypoeutectic Al-Si alloys with B

G. Fan, Huijun Kang, Tongmin Wang, 2016 .

The role of Ga in the microstructure, corrosion behavior and mechanical properties of as-extruded Mg–5Sn–xGa alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2021 .

Three dimensional microstructures and wear resistance of Al-Bi immiscible alloys with different grain refiners

T. Xiao, Ya-nan Fu, Huijun Kang, 2015 .

The role of nickel in mechanical performance and corrosion behaviour of nickel-aluminium bronze in 3.5 wt.% NaCl solution

Huijun Kang, Tongmin Wang, Zongning Chen, 2018, Corrosion Science.

Enhanced thermoelectric performance of variable-valence element Sm-doped BiCuSeO oxyselenides

Huijun Kang, Tongmin Wang, Zongning Chen, 2020, Materials Research Bulletin.

Microstructure and tribological properties of AlCrFe2Ni2W0.2Mo0.75 high-entropy alloy coating prepared by laser cladding in seawater, NaCl solution and deionized water

D. Deng, Huijun Kang, Tongmin Wang, 2020, Surface and Coatings Technology.

Effect of La addition on the particle characteristics, mechanical and electrical properties of in situ Cu-TiB2 composites

Wei Wang, Huijun Kang, Tongmin Wang, 2016 .

Microstructure and enhanced mechanical properties of hybrid-sized B4C particle-reinforced 6061Al matrix composites

Huijun Kang, Tongmin Wang, M. Gao, 2020, Materials Science and Engineering: A.

Effects of Cr and Zr additions on microstructure and properties of Cu-Ni-Si alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2016 .

In Situ Synchrotron X-Ray Diffraction Study of a Deformed Cu-Fe-P Alloy during Heating

Wei Wang, Huijun Kang, Tongmin Wang, 2016 .

Microstructure and texture evolution in the cryorolled CuZr alloy

Wei Wang, Huijun Kang, Tongmin Wang, 2017 .

Thermo-driven oleogel-based self-healing slippery surface behaving superior corrosion inhibition to Mg-Li alloy

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Journal of Magnesium and Alloys.

Development of TiB2 reinforced aluminum foundry alloy based in situ composites – Part I: An improved halide salt route to fabricate Al–5 wt%TiB2 master composite

Huijun Kang, Tongmin Wang, Zongning Chen, 2014 .

Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Materials Science and Engineering: A.

Influence of Alloyed Ga on the Microstructure and Corrosion Properties of As-Cast Mg–5Sn Alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2019, Materials.

Improving the mechanical properties of duplex Mg-Li-Zn alloy by mixed rolling processing

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Materials Today Communications.

Optimization of strength, ductility and electrical conductivity of a Cu–Cr–Zr alloy by cold rolling and aging treatment

Huijun Kang, Yonghao Zhao, Zhu Liu, 2019, Vacuum.

Influence of deformation on the corrosion behavior of LZ91 Mg—Li alloy

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, International Journal of Minerals, Metallurgy and Materials.

Corrosion process of Mg–Sn alloys revealed via in situ synchrotron X-ray radiography

Ya-nan Fu, Huijun Kang, Tongmin Wang, 2021, Materials Letters.

The influence of Sc addition on microstructure and tensile mechanical properties of Mg–4.5Sn–5Zn alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2019, Journal of Magnesium and Alloys.

Improvement of microstructure and mechanical properties of Mg―8Gd―3Y by adding Mg3Zn6Y icosahedral phase alloy

Shiping Wu, Jingjie Guo, Huijun Kang, 2011 .

Microstructure and Interface Of Mg3Zn6Y Quasicrystal Particulate Reinforced Mg-8Gd-3Y Alloy

Shiping Wu, Jingjie Guo, Huijun Kang, 2010 .

The bimodal effect of La on the microstructures and mechanical properties of in-situ A356–TiB2 composites

Huijun Kang, Tongmin Wang, Zongning Chen, 2015 .

Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range

Sheng Guo, Zhiqiang Cao, Yiping Lu, 2017 .

Microstructural characteristics and mechanical behavior of B4Cp/6061Al composites synthesized at different hot-pressing temperatures

Huijun Kang, Tongmin Wang, Y. Fu, 2019, Journal of Materials Science & Technology.

Enhanced strength-ductility synergy in a boron carbide reinforced aluminum matrix composite at 77 K

Huijun Kang, Tongmin Wang, Y. Fu, 2020, Journal of Alloys and Compounds.

Microstructure evolution, electrical conductivity and mechanical properties of dual-scale Cu5Zr/ZrB2 particulate reinforced copper matrix composites

Huijun Kang, Tongmin Wang, Zongning Chen, 2019, Materials Science and Engineering: A.

A nano-micro dual-scale particulate-reinforced copper matrix composite with high strength, high electrical conductivity and superior wear resistance

G. Fan, Huijun Kang, Tongmin Wang, 2018, RSC advances.

Effects of trace La additions on the microstructures and properties of nanoprecipitates strengthened Cu–Zr alloys

Wei Wang, Huijun Kang, Tongmin Wang, 2015 .

In situ synthesis of TiB2 particulate reinforced copper matrix composite with a rotating magnetic field

Wei Wang, Huijun Kang, Tongmin Wang, 2015 .

The roles of Hf element in optimizing strength, ductility and electrical conductivity of copper alloys

Huijun Kang, Tongmin Wang, Rengeng Li, 2019, Materials Science and Engineering: A.

Effects of Nb addition on the microstructures and mechanical properties of a precipitation hardening Cu-9Ni-6Sn alloy

Wei Wang, Huijun Kang, Tongmin Wang, 2018 .

Microstructure and properties of Cu-Cr-Zr (Mg) alloys subjected to cryorolling and aging treatment

Longjian Li, Huijun Kang, Tongmin Wang, 2022, Journal of Alloys and Compounds.

Optimization of the balance between high strength and high electrical conductivity in CuCrZr alloys through two-step cryorolling and aging

Wei Wang, Huijun Kang, Tongmin Wang, 2019, Journal of Alloys and Compounds.

Ultrahigh electrical conductivities and low lattice thermal conductivities of La, Dy, and Nb Co-doped SrTiO3 thermoelectric materials with complex structures

Huijun Kang, Tongmin Wang, Xiong Yang, 2020 .

In-situ synthesis of TiB2 particulate reinforced copper matrix composites with ultrasonic vibration treatment

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Materials Letters.

Three dimensional microstructures and wear resistance of Al-Bi immiscible alloys with different grain refiners

T. Xiao, Ya-nan Fu, Huijun Kang, 2015, Science China Technological Sciences.

Faceted-nonfaceted growth transition and 3-D morphological evolution of primary Al_6Mn microcrystals in directionally solidified Al-3 at.% Mn alloy

Jingjie Guo, H. Fu, Huijun Kang, 2014 .

Application of Rotating Magnetic Field to Improve the Reinforcement Distribution, Electrical Conductivity and Mechanical Properties of Copper Matrix Composite

Wei Wang, Huijun Kang, Tongmin Wang, 2015 .

Multiscale microstructures, mechanical properties and electrical conductivity of in-situ dual-size TiB2 particles reinforced 6201 aluminum matrix composites

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Journal of Materials Research and Technology.

Influence of Ni addition on structure and magnetic properties of FeCo-based Finemet-type alloys

Huijun Kang, Yun-yun Jia, Rui-min Shi, 2011 .

Manipulating the particle distribution of in situ TiB2p/Al composites via acoustic vibration and cooling rate

Huijun Kang, Tongmin Wang, Zongning Chen, 2020 .

Effects of NaBF4 + NaF on the Tensile and Impact Properties of Al-Si-Mg-Fe Alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2015, Metallurgical and Materials Transactions A.

Top-down method to fabricate TiNi1+xSn half-Heusler alloy with high thermoelectric performance

Huijun Kang, Tongmin Wang, Zongning Chen, 2021 .

Enhanced Thermoelectric Properties of Zr0.85–xHfxNb0.15–yTayCoSb Medium-Entropy Alloys: Tradeoff between “What to Alloy” and “How Much to Alloy”

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Chemistry of Materials.

Growth behavior of Cu6Sn5 in Sn-6.5 Cu solders under DC considering trace Al: In situ observation

T. Xiao, Ya-nan Fu, Huijun Kang, 2015 .

In situ study on growth behavior of Cu6Sn5 during solidification with an applied DC in RE-doped Sn–Cu solder alloys

T. Xiao, Ya-nan Fu, Huijun Kang, 2014, Journal of Materials Science: Materials in Electronics.

Revealing the role of micropore defects in tensile deformation of a B4Cp/Al composite using an actual three-dimensional model

Huijun Kang, Tongmin Wang, M. Gao, 2022, Journal of Materials Research and Technology.

3D Morphology and Formation Process of the Icosahedral Quasicrystalline Phase in Rapidly Solidified Al–Mn Alloy

Jingjie Guo, Huijun Kang, Zongning Chen, 2016, Acta Metallurgica Sinica (English Letters).

Magnetic permeability of Si-rich (FeCoNi)-based nanocrystalline alloy: Thermal stability in a wide temperature range

Huijun Kang, Yun-yun Jia, Rui-min Shi, 2013 .

Enhancement in the Thermoelectric Performance of ZrNiSn-based Alloys Through Extra Zr-rich Nanoprecipitates with Superstructures

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Chemical Engineering Journal.

Enhanced Thermoelectric Performance of Zr1-xTaxNiSn Half-Heusler Alloys by Diagonal-rule Doping.

Huijun Kang, Tongmin Wang, Zongning Chen, 2019, ACS applied materials & interfaces.

Enhancing thermoelectric properties of MCoSb-based alloys by entropy-driven energy-filtering effects and band engineering

Huijun Kang, Tongmin Wang, Zongning Chen, 2022, Materials Today Physics.

High thermoelectric properties of Cu2Te Ag2Te composite with Fe addition and non-stoichiometric Te

Huijun Kang, B. Xiao, Chun Ying, 2023, Journal of Materiomics.

Maximizing the scattering of multiwavelength phonons in novel biphasic high-entropy ZrCoSb-based half-Heusler alloys

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Journal of Materiomics.

3D Visualized Characterization of Fracture Behavior of Structural Metals Using Synchrotron Radiation Computed Microtomography

T. Xiao, Chao Xu, Meng Huang, 2019, Quantum Beam Science.

Pencil painting like preparation for flexible thermoelectric material of high-performance p-type Na1.4Co2O4 and novel n-type NaxCo2O4

Huijun Kang, Tongmin Wang, Zhen Tian, 2021 .

Microstructure and Mechanical Properties of Alnbtivzr System Refractory High Entropy Alloys

Huijun Kang, D. Dong, Bo Jiang, 2022, SSRN Electronic Journal.

Optimizing the thermoelectric transport properties of BiCuSeO via doping with the rare-earth variable-valence element Yb

G. Fan, Huijun Kang, Tongmin Wang, 2018 .

ZrNiSn-based compounds with high thermoelectric performance and ultralow lattice thermal conductivity via introduction of multiscale scattering centers

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Journal of Materiomics.

In Situ Study on the Evolution of Dendrite Morphology Affected by Electric Field in Sn‐Bi Alloy

T. Xiao, Ya-nan Fu, Huijun Kang, 2015 .

Effect of Al on Microstructure and Mechanical Properties of Lightweight Alxnb0.5tiv2zr0.5 Refractory High Entropy Alloys

Huijun Kang, Tengfei Ma, Bo Jiang, 2023, SSRN Electronic Journal.

In Situ Tomographic Observation of Dendritic Growth in Mg/Al Matrix Composites

A. Phillion, Huijun Kang, Tongmin Wang, 2019, Light Metals 2019.

High elongation achieved by band-like distribution of reinforcements in aluminum matrix composites

T. Xiao, Chao Xu, G. Fan, 2018, Materials Characterization.

Controllable 3D morphology and growth mechanism of quasicrystalline phase in directionally solidified Al–Mn–Be alloy

Yan-qing Su, Jingjie Guo, Huijun Kang, 2014 .

Improving the stress corrosion resistance of 7075 matrix composites through combination of nanoparticle incorporation and retrogression re-aging treatment

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Materials Today Communications.

A research on the electrical sliding behavior wear of dual-scale particulate reinforced copper matrix composites

Huijun Kang, Tongmin Wang, Zongning Chen, 2021, Materials Characterization.

Effects of Cr Addition on the Precipitation and Properties of Cryo-Rolled CuNiSi Alloys

W. Wang, Huijun Kang, Tongmin Wang, 2023, Metals.

Enhancing Thermoelectric Performance of CuInTe2 via Trace Ag Doping at Indium Sites.

Huijun Kang, Zongning Chen, E. Guo, 2023, ACS applied materials & interfaces.

Optimization design of wide face water slots for medium-thick slab casting mold

Huijun Kang, Tongmin Wang, Zongning Chen, 2016 .

Effect of Composition Regulation on Thermoelectric Properties of Fe_3Al_2Si_3-Based Compounds

Huijun Kang, Zongning Chen, E. Guo, 2023, Journal of Electronic Materials.

Preparing bulk Cu-Ni-Mn based thermoelectric alloys and synergistically improving their thermoelectric and mechanical properties using nanotwins and nanoprecipitates

H. Kang, Huijun Kang, Tongmin Wang, 2020 .

Thermoelectric properties of half-Heusler alloys

Huijun Kang, Zongning Chen, E. Guo, 2024, International Materials Reviews.

The role of TiB2 nanoparticles in reducing the microstructural sensitivity of as-cast Al-Mg-Mn alloy to cooling rate

Huijun Kang, Zongning Chen, E. Guo, 2024, Materials Science and Engineering: A.

Biomimetic superhydrophobic matrix constructed on a buffer aluminum layer: a compositing coating for Mg-Li alloy corrosion inhibition

Huijun Kang, Tongmin Wang, Zongning Chen, 2023, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

Recent progress in protective coatings against corrosion upon magnesium–lithium alloys: A critical review

Huijun Kang, Yibo Ouyang, E. Guo, 2024, Journal of Magnesium and Alloys.

Effects of Reinforcement Content and Homogenization Treatment on the Microstructure and Mechanical Properties of in-situ TiB2/2219Al Composites

Huijun Kang, E. Guo, Lifeng Jiang, 2024, Acta Metallurgica Sinica (English Letters).