Xu Wang

发表

A prediction model for the milling of thin-wall parts considering thermal-mechanical coupling and tool wear

S. Ding, G. Li, Ge Wu, 2020 .

A study of harvested power and energy harvesting efficiency using frequency response analyses of power variables

Xu Wang, 2019, Mechanical Systems and Signal Processing.

Development of empirical models of polyfelt fibrous materials for acoustical applications

Xu Wang, S. Mazlan, L. Egab, 2013 .

Fractional-order proportional-integral-derivative linear active disturbance rejection control design and parameter optimization for hypersonic vehicles with actuator faults

Xu Wang, Ke Gao, Jia Song, 2021 .

Simulation and Experimental Investigation on Friction Reduction by Partial Laser Surface Texturing on Piston Ring

G. Shu, Xu Wang, Xingyu Liang, 2020 .

Comparison and parameter optimization of a segmented thermoelectric generator by using the high temperature exhaust of a diesel engine

G. Shu, Xiuxiu Sun, Xu Wang, 2015 .

Effect of lubricating oil additive package on the characterization of diesel particles

G. Shu, Xu Wang, Yuesen Wang, 2014 .

Parameter study and optimization of a half-vehicle suspension system model integrated with an arm-teeth regenerative shock absorber using Taguchi method

Xu Wang, Ran Zhang, 2019, Mechanical Systems and Signal Processing.

A new concept of speed amplified nonlinear electromagnetic vibration energy harvester through fixed pulley wheel mechanisms and magnetic springs

S. Ding, Xu Wang, Zhenwei Liu, 2019, Mechanical Systems and Signal Processing.

A novel regenerative shock absorber with a speed doubling mechanism and its Monte Carlo simulation

Zhenwei Liu, Xu Wang, Ran Zhang, 2018 .

Lateral comparison of the coupling parameters on the novel hexagonal shaped cross flow thermoelectric generator

Xu Wang, Hui Zhang, Ran Zhang, 2021 .

Comparison and parameter optimization of a two-stage thermoelectric generator using high temperature exhaust of internal combustion engine

Gequn Shu, Hua Tian, Xingyu Liang, 2014 .

On the analysis of coupling strength of a stiffened plate-cavity coupling system using a deterministic-statistical energy analysis method

Xu Wang, L. Egab, 2022 .

A comprehensive comparison of the vehicle vibration energy harvesting abilities of the regenerative shock absorbers predicted by the quarter, half and full vehicle suspension system models

X. Qiu, Xu Wang, Liya Zhao, 2020, Applied Energy.

A study of the effects of increasing the degrees of freedom of a point-absorber wave energy converter on its harvesting performance

Xu Wang, Elie Al Shami, X. Ji, 2019, Mechanical Systems and Signal Processing.

Vibration transfer function of in-plane rigid–elastic-coupled tire model for heavy-loaded radial tire

Xu Wang, Zhihao Liu, Q. Gao, 2017 .

Ocean Wave Energy Conversion Analysis

Xu Wang, 2017 .

Improved thermal performance of annular fin-shell tube storage system using magnetic fluid

Prashant Kumar, Xu Wang, Saurabh Pathak, 2019, Applied Energy.

Acoustical Characterisation of Porous Sound Absorbing Materials: A Review

Mohammad Fard, Xu Wang, Laith Egab, 2014 .

A state-of-art review on chatter and geometric errors in thin-wall machining processes

S. Ding, G. Li, Ge Wu, 2021, Journal of Manufacturing Processes.

Coupling analysis of linear vibration energy harvesting systems

Simon Watkins, Xu Wang, Xingyu Liang, 2016 .

A full-spectrum analysis of high-speed train interior noise under multi-physical-field coupling excitations

Zhiyong Hao, Xu Zheng, Jie Mao, 2016 .

Experimental Investigation on Wall Film Distribution of Dimethyl Ether/Diesel Blended Fuels Formed during Spray Wall Impingement

Hanzhengnan Yu, Xingyu Liang, Yuesen Wang, 2016 .

A study of a speed amplified linear generator for low-frequency wave energy conversion

Xu Wang, N. Baker, Zhenwei Liu, 2021 .

A parameter study and optimization of two body wave energy converters

Lei Zuo, Xu Wang, Ran Zhang, 2019, Renewable Energy.

An active seat suspension design for vibration control of heavy-duty vehicles

Shuaishuai Sun, Haiping Du, Donghong Ning, 2016 .

Alkanes as working fluids for high-temperature exhaust heat recovery of diesel engine using organic Rankine cycle

Gequn Shu, Hua Tian, Xingyu Liang, 2014 .

Development of a novel knock characteristic detection method for gasoline engines based on wavelet-denoising and EMD decomposition

Xu Wang, Fengrong Bi, Teng Ma, 2019, Mechanical Systems and Signal Processing.

Modelling of linear and non-linear two-body wave energy converters under regular and irregular wave conditions

Xu Wang, J. Monty, X. Ji, 2020, Renewable Energy.

A multi-degree of freedom piezoelectric vibration energy harvester with piezoelectric elements inserted between two nearby oscillators

Xu Wang, Sabu John, Han Xiao, 2016 .

Xinghuo Yu, Simon Watkins, Xu Wang, 2015 .

A study of tyre cavity resonance and noise reduction using inner trim

Zamri Mohamed, Xu Wang, Xu Wang, 2015 .

A dimensionless analysis of a 2DOF piezoelectric vibration energy harvester

Xu Wang, Sabu John, Han Xiao, 2015 .

Frequency Analysis of Vibration Energy Harvesting Systems

Xu Wang, Xu Wang, 2016 .

Drone on: A preliminary investigation of the acoustic impact of unmanned aircraft systems (UAS)

Xu Wang, Jennifer L. Palmer, S Watkins, 2017 .

Characterization and implementation of a double-sided arm-toothed indirect-drive rotary electromagnetic energy-harvesting shock absorber in a full semi-trailer truck suspension platform

Xingjian Jing, Mohamed A. A. Abdelkareem, Xu Wang, 2022, Energy.

A novel indirect-drive regenerative shock absorber for energy harvesting and comparison with a conventional direct-drive regenerative shock absorber

Xu Wang, Sabu John, Ran Zhang, 2018, Applied Energy.

Reduction of low frequency vibration of truck driver and seating system through system parameter identification, sensitivity analysis and active control

Xu Wang, Fengrong Bi, Haiping Du, 2018 .

Using the analytic network process (ANP) to determine method of waste energy recovery from engine

Kang Sun, Xu Wang, Xinlei Wang, 2013 .

Analytical and Experimental Study on Bending Vibration of Internal Combustion Engines Shafting System Based on Wave Equations

Kang Sun, Xu Wang, Xingyu Liang, 2013 .

Reduction of roof rack noise and vibration

Simon Watkins, Xu Wang, Xu Wang, 2010 .

Axial vibration source identification of engine crankshaft based on auto-regressive and moving average model and analytic hierarchy process method

Xu Wang, Gequn Shu, Xingyu Liang, 2014 .

Pedestrian Throw Distance Impact Speed Contour Plots Using PC-Crash

Shane Richardson, Xu Wang, Blake Winter, 2015 .

Research on the Effect of Urban Road Traffic Soundscape on Drivers' Psychological Acoustics

Kang Sun, Xu Wang, Xingyu Liang, 2014 .

Comparison of electromagnetic and piezoelectric vibration energy harvesters with different interface circuits

Nong Zhang, Zhiyong Hao, Xu Wang, 2016 .

Dimensionless optimization of piezoelectric vibration energy harvesters with different interface circuits

Xu Wang, Liwei Lin, Liwei Lin, 2013 .

Dimensionless Analysis and Optimization of Piezoelectric Vibration Energy Harvester

Xu Wang, Han Xiao, Xu Wang, 2013 .

A deterministic and statistical energy analysis of tyre cavity resonance noise

Xu Wang, Zamri Mohamed, Xu Wang, 2016 .

A survey of wheel tyre cavity resonance noise

Xu Wang, Reza N. Jazar, Zamri Mohamed, 2013 .