B. Haddag

发表

Experimental and numerical analyses of the tool wear in rough turning of large dimensions components of nuclear power plants

Mohammed Nouari, Badis Haddag, Claude Barlier, 2014 .

Tribological behaviour and tool wear analyses in rough turning of large-scale parts of nuclear power plants using grooved coated insert

Mohammed Nouari, Badis Haddag, Hamid Makich, 2014 .

Quantification of the chip segmentation in metal machining: Application to machining the aeronautical aluminium alloy AA2024-T351 with cemented carbide tools WC-Co

M. Nouari, B. Haddag, S. Kouadri, 2013 .

Analysis of a new Segmentation Intensity Ratio “SIR” to characterize the chip segmentation process in machining ductile metals

M. Nouari, B. Haddag, S. Atlati, 2011 .

Active vibration control of composite plate with optimal placement of piezoelectric patches

M. Nouari, B. Haddag, Kouider Bendine, 2019 .

A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation

M. Nouari, B. Haddag, T. Cutard, 2013 .

Effect of the local friction and contact nature on the Built-Up Edge formation process in machining ductile metals

M. Nouari, B. Haddag, S. Atlati, 2015 .

Combined microstructure-based flow stress and grain size evolution models for multi-physics modelling of metal machining

M. Nouari, B. Haddag, M. Zenasni, 2016 .

Finite element modelling of the thermo-mechanical behavior of coatings under extreme contact loading in dry machining

Mohammed Nouari, Badis Haddag, M. Nouari, 2011 .

Strain localization analysis using a large deformation anisotropic elastic-plastic model coupled with damage

T. Balan, B. Haddag, F. Abed-Meraim, 2009 .

Effects of friction conditions on the formation of dead metal zone in orthogonal cutting – a finite element study

B. Haddag, Y. Sheng, Dongmin Yang, 2018 .

Analysis of coating performances in machining titanium alloys for aerospace applications

M. Nouari, F. Girot, B. Haddag, 2013 .

Experimental analysis of the BTA deep drilling and a new analytical thermomechanical model for assessment of cutting forces and BTA drill design

M. Nouari, B. Haddag, A. Moufki, 2020 .

Prediction of strain localization in sheet metal forming using elastoplastic-damage model and localization criterion

T. Balan, B. Haddag, F. Abed-Meraim, 2007 .

Experimental and numerical study of DC04 sheet metal behaviour—plastic anisotropy identification and application to deep drawing

M. Nouari, B. Haddag, H. Bendjama, 2018, The International Journal of Advanced Manufacturing Technology.

Experimental and numerical study of DC04 sheet metal behaviour—plastic anisotropy identification and application to deep drawing

M. Nouari, B. Haddag, H. Bendjama, 2018, The International Journal of Advanced Manufacturing Technology.

Interaction between the local tribological conditions at the tool–chip interface and the thermomechanical process in the primary shear zone when dry machining the aluminum alloy AA2024–T351

M. Nouari, B. Haddag, S. Atlati, 2017 .

Investigation of advanced strain-path dependent material models for sheet metal forming simulations

Farid Abed-Meraim, Badis Haddag, Tudor Balan, 2007 .

Springback Simulation: Impact of Some Advanced Constitutive Models and Numerical Parameters

Farid Abed-Meraim, Badis Haddag, Tudor Balan, 2005 .

A physical behavior model including dynamic recrystallization and damage mechanisms for cutting process simulation of the titanium alloy Ti-6Al-4V

M. Nouari, B. Haddag, H. Makich, 2018, The International Journal of Advanced Manufacturing Technology.

Modeling of velocity-dependent chip flow angle and experimental analysis when machining 304L austenitic stainless steel with groove coated-carbide tools

Mohammed Nouari, Badis Haddag, Christophe Czarnota, 2013 .

Analysis of the heat transfer at the tool–workpiece interface in machining: determination of heat generation and heat transfer coefficients

M. Nouari, B. Haddag, S. Atlati, 2015, Heat and Mass Transfer.

Analysis of the heat transfer at the tool–workpiece interface in machining: determination of heat generation and heat transfer coefficients

Mohammed Nouari, Samir Atlati, Badis Haddag, 2015 .

Thermomechanical modelling of the tool–workmaterial interface in machining and its implementation using the \ABAQUS\ \VUINTER\ subroutine

Mohammed Nouari, Samir Atlati, Badis Haddag, 2014 .

Tool wear and heat transfer analyses in dry machining based on multi-steps numerical modelling and experimental validation

Mohammed Nouari, Badis Haddag, M. Nouari, 2013 .

Assessment of chip segmentation process in machining using physical parameters

Mohammed Nouari, Samir Atlati, Badis Haddag, 2013 .

A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation

M. Nouari, B. Haddag, T. Cutard, 2012, Heat and Mass Transfer.

Analysis of the Cutting Parameters Influence During Machining Aluminium Alloy A2024-T351 with Uncoated Carbide Inserts

M. Nouari, B. Haddag, C. Barlier, 2012 .

Finite element formulation effect in three-dimensional modeling of a chip formation during machining

M. Nouari, B. Haddag, S. Atlati, 2010 .

Numerical and experimental investigations of S-Glass/Polyester composite laminate plate under low energy impact

M. Nouari, B. Haddag, F. B. Boukhoulda, 2016 .

Multi-Physics Analysis of Machining Ti-6Al-4V Alloy: Experimental Characterization and a New Material Behavior Modeling

M. Nouari, B. Haddag, H. Makich, 2022, Metals.

Dry Machining Aeronautical Aluminum Alloy AA2024-T351: Analysis of Cutting Forces, Chip Segmentation and Built-Up Edge Formation

M. Nouari, B. Haddag, S. Atlati, 2016 .

Multi-physics Modelling in Machining OFHC Copper – Coupling of Microstructure-based Flow Stress and Grain Refinement Models

M. Nouari, B. Haddag, M. Zenasni, 2015 .

Elaboration and mechanical properties analysis of a composite based on polyester resin reinforced with natural Alfa fibres

M. Nouari, B. Haddag, H. Makich, 2019, Journal of Composite Materials.

Strain localization and damage prediction during sheet metal forming

T. Balan, B. Haddag, F. Abed-Meraim, 2008 .

Prediction of the Cutting Forces and Chip Morphology When Machining the Ti6Al4V Alloy Using a Microstructural Coupled Model

M. Nouari, B. Haddag, H. Makich, 2017 .

Characterization and Modelling of the Rough Turning Process of Large-scale Parts: Tribological Behaviour and Tool Wear Analyses

Mohammed Nouari, Badis Haddag, Hamid Makich, 2015 .

Experimental and analytical analyses of the cutting process in the deep hole drilling with BTA (Boring Trepanning Association) system

Mohammed Nouari, Badis Haddag, Julien Thil, 2013 .

Some cases of machining large-scale parts: Characterization and modelling of heavy turning, deep drilling and broaching

A. Moufki, Mohammed Nouari, Badis Haddag, 2016 .