S. Atlati

发表

Quantification of the chip segmentation in metal machining: Application to machining the aeronautical aluminium alloy AA2024-T351 with cemented carbide tools WC-Co

M. Nouari, B. Haddag, S. Kouadri, 2013 .

Analysis of a new Segmentation Intensity Ratio “SIR” to characterize the chip segmentation process in machining ductile metals

M. Nouari, B. Haddag, S. Atlati, 2011 .

Effect of the local friction and contact nature on the Built-Up Edge formation process in machining ductile metals

M. Nouari, B. Haddag, S. Atlati, 2015 .

A 3D FE Modeling of Machining Process of Nomex® Honeycomb Core: Influence of the Cell Structure Behaviour and Specific Tool Geometry

M. Nouari, H. Makich, S. Atlati, 2017 .

Study on the behavior law when milling the material of the Nomex honeycomb core

M. Nouari, S. Atlati, Tarik Zarrouk, 2021 .

Modeling and numerical simulation of the chip formation process when machining Nomex

M. Nouari, S. Atlati, Tarik Zarrouk, 2021, Environmental Science and Pollution Research.

Analysis of friction and cutting parameters when milling honeycomb composite structures

M. Nouari, H. Makich, S. Atlati, 2021, Advances in Mechanical Engineering.

Interaction between the local tribological conditions at the tool–chip interface and the thermomechanical process in the primary shear zone when dry machining the aluminum alloy AA2024–T351

M. Nouari, B. Haddag, S. Atlati, 2017 .

Physics-based plasticity model incorporating microstructure changes for severe plastic deformation

S. Atlati, M. Zenasni, O. Oussouaddi, 2019, Comptes Rendus Mécanique.

Numerical study of the effect of concrete cover and the friction of steel concrete interface

S. Atlati, M. Zenasni, R. Addou, 2019, MATEC Web of Conferences.

Optimization of the milling process for aluminum honeycomb structures

M. Nouari, H. Makich, S. Atlati, 2022, The International Journal of Advanced Manufacturing Technology.

Analysis of the heat transfer at the tool–workpiece interface in machining: determination of heat generation and heat transfer coefficients

M. Nouari, B. Haddag, S. Atlati, 2015, Heat and Mass Transfer.

Analysis of the heat transfer at the tool–workpiece interface in machining: determination of heat generation and heat transfer coefficients

Mohammed Nouari, Samir Atlati, Badis Haddag, 2015 .

Thermomechanical modelling of the tool–workmaterial interface in machining and its implementation using the \ABAQUS\ \VUINTER\ subroutine

Mohammed Nouari, Samir Atlati, Badis Haddag, 2014 .

Assessment of chip segmentation process in machining using physical parameters

Mohammed Nouari, Samir Atlati, Badis Haddag, 2013 .

Analysis of the Cutting Parameters Influence During Machining Aluminium Alloy A2024-T351 with Uncoated Carbide Inserts

M. Nouari, B. Haddag, C. Barlier, 2012 .

Finite element formulation effect in three-dimensional modeling of a chip formation during machining

M. Nouari, B. Haddag, S. Atlati, 2010 .

Modeling and Numerical Simulation of the Cracking of a Diamond-Coated Cutting Tool during Machining

M. Nouari, R. Selvam, S. Atlati, 2019, Key Engineering Materials.

Dry Machining Aeronautical Aluminum Alloy AA2024-T351: Analysis of Cutting Forces, Chip Segmentation and Built-Up Edge Formation

M. Nouari, B. Haddag, S. Atlati, 2016 .

The Influence of Machining Conditions on The Milling Operations of Nomex Honeycomb Structure

M. Nouari, S. Atlati, Tarik Zarrouk, 2023 .