J. Yeomans

发表

Studies of ceramic-liquid metal reaction interfaces

J. Yeomans, T. Page, 1990 .

Ductile particle ceramic matrix composites—Scientific curiosities or engineering materials?

Julie A. Yeomans, J. Yeomans, 2008 .

Influence of Particle Size Distribution on Ductile‐Phase Toughening in Brittle Materials

J. Yeomans, Xudong Sun, 1996 .

The toughening of alumina with iron: Effects of iron distribution on fracture toughness

J. Yeomans, P. A. Trusty, 1997 .

The thermal shock behaviour of ductile particle toughened alumina composites

J. Yeomans, M. Aldridge, Matt Aldridge, 1999 .

Thermal Shock Behavior of Iron‐Particle‐Toughened Alumina

J. Yeomans, M. Aldridge, Matt Aldridge, 2001 .

Processing and mechanical properties of Al 2O 35 vol.% Cr nanocomposites

J. Yeomans, Yongsheng Ji, 2002 .

Optimization of a Ductile-Particle-Toughened Ceramic

J. Yeomans, Xudong Sun, 2005 .

Surface preparation of silicon carbide for improved adhesive bond strength in armour applications

P. Smith, J. Yeomans, A. Harris, 2013 .

An Investigation into the Nature of the Oxide Layer Formed on Kovar (Fe–29Ni–17Co) Wires Following Oxidation in Air at 700 and 800 °C

J. Yeomans, P. Mallinson, M. Whiting, 2017, Oxidation of Metals.

The effect of a constraint on the sintering and stress development in alumina thick films

R. Dorey, J. Yeomans, M. Tillman, 2014 .

Thermal shock fracture in unidirectional fibre-reinforced ceramic-matrix composites

P. Smith, J. Yeomans, C. Kastritseas, 2005 .

A model for the sintering of spherical particles of different sizes by solid state diffusion

Jing-Song Pan, J. Yeomans, S. Kucherenko, 1998 .

Aspects of residual thermal stresses in continuous-fibre-reinforced ceramic matrix composites

P. Smith, J. Yeomans, K. Powell, 1993 .

Surface Preparation of Alumina for Improved Adhesive Bond Strength in Armor Applications

P. Smith, J. Yeomans, A. Harris, 2012 .

Spatially resolved electron energy‐loss studies of metal–ceramic interfaces in transition metal/alumina cermets

J. Bruley, J. Yeomans, H. Müllejans, 1995 .

A study of microhardness indentation fracture in alumina using confocal scanning laser microscopy

J. Yeomans, A. Winn, 1996 .

On the Microstructure and Hardness Characteristics of Composite Ceramics for Tool Applications

J. Yeomans, T. Page, 1986 .

Effect of NiO on the Phase Stability and Microstructure of Yttria‐Stabilized Zirconia

J. Yeomans, R. Thomson, P. M. Delaforce, 2007 .

Effect of interfacial area on densification and microstructural evolution in silicon carbide–boron carbide particulate composites

P. Smith, J. Yeomans, T. Williams, 2015, Journal of Materials Science.

Wear performance and characterisation of coatings for nuclear applications: WC-(W,Cr)2C-Ni and hard chromium plate

J. Yeomans, M. Gee, J. Watts, 2019, Wear.

A New Scheme of Finding the Master Sintering Curve

J. Yeomans, Jingzhe Pan, S. Kiani, 2006 .

Fabrication of a Glass‐Ceramic‐to‐Metal Seal Between Ti–6Al–4V and a Strontium Boroaluminate Glass

J. Yeomans, P. Mallinson, J. Fernie, 2016 .

Microstructure and fracture toughness of nickel particle toughened alumina matrix composites

J. Yeomans, Xudong Sun, 1996, Journal of Materials Science.

Effect of pore clustering on the mechanical properties of ceramics

R. Dorey, P. Smith, J. Yeomans, 2002 .

A combined finite element and finite difference scheme for computer simulation of microstructure evolution and its application to pore–boundary separation during sintering

Jing-Song Pan, J. Yeomans, S. Kucherenko, 2000 .

Ballistic testing of surface‐treated alumina and silicon carbide with improved adhesive bond strength

P. Smith, J. Yeomans, A. Harris, 2017 .

Effect of temperature and particle velocity on the erosion of a silicon carbide continuous fibre reinforced calcium aluminosilicate glass–ceramic matrix composite

J. Yeomans, J. Watts, A. Ham, 1999 .

Understanding the ballistic event: methodology and initial observations

P. Smith, J. Yeomans, J. Cotton, 2016, Journal of Materials Science.

Constrained Sintering of Yttria-Stabilized Zirconia Electrolytes: The Influence of Two-Step Sintering Profiles on Microstructure and Gas Permeance

J. Yeomans, G. J. Wright, 2008 .

Thermal shock behaviour of angle-ply and woven dense ceramic-matrix composites

P. Smith, J. Yeomans, C. Kastritseas, 2008, Journal of Materials Science.

Precipitous weakening of quartz at the α – β phase inversion

B. Lawn, R. Raj, J. Yeomans, 2020 .

Control of carbon content in WC-Co hardmetal by heat treatment in reducing atmospheres containing methane

J. Yeomans, M. Whiting, S. Parker, 2017 .

The correlation of indentation behaviour with ballistic performance for spark plasma sintered armour ceramics

P. Smith, J. Yeomans, A. Heaton, 2015 .

Interaction of (La1 − xSrx)1 − yMnO3–Zr1 − zYzO2 − d cathodes and LaNi0.6Fe0.4O3 current collecting layers for solid oxide fuel cell application

J. Yeomans, P. Slater, L. Millar, 2008 .

Microstructure and mechanical properties of chromium and chromium/nickel particulate reinforced alumina ceramics

J. Yeomans, Y. Ji, 2002 .

Thermal shock fracture in cross-ply fibre-reinforced ceramic–matrix composites

P. Smith, J. Yeomans, C. Kastritseas, 2010 .

Thermal shock of ceramic matrix composites

P. Smith, J. Yeomans, C. Kastritseas, 2006 .

Rolling and sliding: Separation of adhesion and deformation friction and their relative contribution to total friction

Duale Mahdi, Julie A. Yeomans, P. Smith, 2015 .

The influence of screen-printing parameters on the microstructure and gas permeance of a zirconia electrolyte

J. Yeomans, G. J. Wright, 2008 .

Three-step sintering of constrained yttria stabilised zirconia layers and its effect on microstructure and gas permeance

J. Yeomans, G. J. Wright, 2009 .

Contributors contact details

Yu Zhang, Zhiyong Yu, Ruigang Wang, 2006 .

Water-lubricated and dry sliding wear of yttria stabilised zirconia and silicon carbide couples: Part I: Wear rates

P. Smith, J. Yeomans, A. Riches, 1999 .

A comparative study of the wear performance of hard coatings for nuclear applications

Mark K. Gee, J. Yeomans, J. Watts, 2022, Wear.

Finite element analysis of sintering deformation using densification data instead of a constitutive law

J. Yeomans, P. Blanchart, Jingzhe Pan, 2007 .

The Effect of NiO on the Phase Stability and Microstructure of

J. Yeomans, R. Thomson, P. M. Delaforce, 2006 .

In situ optical dilatometric measurements of the initial stages of sintering of alumina

Jing-Song Pan, R. Dorey, P. Smith, 2001 .

Damage characterisation of thermally shocked cross-ply ceramic composite laminates

J. Yeomans, C. Kastritseas, P. A. Smith, 2006 .

Flexural mechanical properties of thermally treated unidirectional and cross-ply Nicalon-reinforced calcium aluminosilicate composites

J. Yeomans, M. Blissett, P. A. Smith, 1998 .