J. Gurland

发表

New scientific approaches to development of tool materials

J. Gurland, J. Gurland, 1988 .

THE MECHANISM OF DUCTILE RUPTURE OF METALS CONTAINING INCLUSIONS

J. Gurland, J. Plateau, 1963 .

Science of Hard Materials

J. Gurland, D. Rowcliffe, R. K. Viswanadham, 1983 .

Relation of Strength, Composition, and Grain Size of Sintered WC-Co Alloys

J. Gurland, P. Bardzil, 1955 .

An approximate method for the estimate of the contribution of load transfer to the internal stress in dispersed particles

J. Gurland, 1979 .

Void nucleation in spheroidized carbon steels Part 2: Model

J. R. Fisher, J. Gurland, PhD J. R. Fisher, 1981 .

Void nucleation in spheroidized carbon steels Part 1: Experimental

J. R. Fisher, J. Gurland, 1981 .

Observations on the fracture of cementite particles in a spheroidized 1.05% c steel deformed at room temperature

J. Gurland, J. Gurland, 1972 .

The law of mixtures applied to the plastic deformation of two- phase alloys of coarse microstructures

J. Gurland, K. Cho, J. Gurland, 1988 .

A Study of the Deformation and Fracture of a Dual-Phase Steel

J. Gurland, J. Gurland, A. F. Szewczyk, 1982 .

A structural approach to the yield strength of two-phase alloys with coarse microstructures

J. Gurland, J. Gurland, 1979 .

Some aspects of the plastic deformation of phase mixtures with coarse microstructures. [Two-phase alloys]

J. Gurland, 1982 .

Hardness and deformation of cemented tungsten carbide

J. Gurland, H. Lee, 1978 .

Experimental survey of the deformation of the hard-ductile two-phase alloy system Wcco

J. Gurland, J. Gurland, C. Nishimatsu, 1958 .

Effect of internal boundaries on the yield strengths of spheroidized steels

L. Anand, J. Gurland, 1976 .

Observations on the effect of cementite particles on the fracture toughness of spheroidized carbon steels

J. Gurland, S. Rawal, 1977 .

The relationship between the size of cementite particles and the subgrain size in quenched-and-tempered steels

L. Anand, J. Gurland, 1975 .

The Mechanical Properties of Metals

D. McLean, J. Gurland, J. Gurland, 1963 .

Applicability of the critical strain fracture criterion to WC-Co hard metals

J. Gurland, R. Godse, J. Gurland, 1988 .

The fracture toughness of WC-Co two-phase alloys—A preliminary model

J. Gurland, Morihiko Nakamura, M. Nakamura, 1980 .

The fracture toughness of WCCo alloys measured on single-edge notched beam specimens precracked by electron discharge machining

J. Gurland, J. R. Pickens, 1978 .

Orientation of contiguous tungsten carbide crystals in sintered WC-Co as determined from slip line traces☆

J. Gurland, R. Deshmukh, 1982 .

A REVIEW OF PARAMETERS INFLUENCING SOME MECHANICAL PROPERTIES OF TUNGSTEN CARBIDE–COBALT ALLOYS

H. Exner, J. Gurland, 1970 .

Role of the Binder Phase in Cemened Tungsten Carbide-Cobalt Alloys

J. T. Norton, J. Gurland, 1952 .

A Study of the Fracture Process of WC-Co Alloys

J. Gurland, Joonpyo Hong, 1983 .

Strain partition, uniform elongation and fracture strain in dual-phase steels

J. Gurland, Y. L. Su, J. Gurland, 1987 .

The Preparation and Properties of Pure Titanium

B. W. Gonser, I. E. Campbell, R. Jaffee, 1948 .

Effects of residual stresses in fracture toughness testing of hard metals

S. Suresh, J. Gurland, R. Godse, 1988 .

A COMBINED MACROSCOPIC AND MICROSCOPIC APPROACH TO THE MECHANICAL PROPERTIES OF METALS. Progress Report, February 1965-January 1966

D. C. Drucker, J. Gurland, 1966 .

A comparison of indentation crack resistance and fracture toughness of five WC-Co alloys

J. Gurland, E. Exner, J. R. Pickens, 1978 .

Application of Quantitative Microscopy to Cemented Carbides

J. Gurland, J Gurland, 1984 .

Metallographic characterization of fracture surface profiles on sectioning planes

J. Gurland, J. R. Pickens, 1974 .

Strength and fracture of two-phase alloys: a comparison of two alloy systems

J. Gurland, 1978 .

The influence of composition and microstructure on the strength of cast aluminium-silicon alloys.

J. Gurland, E. Erginer, 1970 .

Observations on the Effect of Cementite Particles on the Fracture of Spheroidized Carbon Steels

J. Gurland, S. Rawal, 2013 .

A statistical model for low temperature cleavage fracture in mild steels

J. Gurland, R. Godse, J. Gurland, 1989 .

Comparison of the statistics of two fracture modes

J. Gurland, J. Gurland, D. E. Gücer, 1962 .