I. Samarasekera

发表

MMCX—An expert system for metal matrix composite selection and design

C. F. Legzdins, I. Samarasekera, J. Meech, 1997 .

Investigation of panel crack formation in steel ingots: Part I. Mathematical analysis and mid face panel cracks

B. Thomas, J. Brimacombe, I. Samarasekera, 1988 .

Mathematical model of the thermal processing of steel ingots: Part II. Stress model

I. V. Samarasekera, J. K. Brimacombe, Brian G. Thomas, 1987 .

Mathematical model of the thermal processing of steel ingots: Part I. Heat flow model

I. V. Samarasekera, J. K. Brimacombe, Brian G. Thomas, 1987 .

Comparison of numerical modeling techniques for complex, two-dimensional, transient heat-conduction problems

I. V. Samarasekera, J. K. Brimacombe, Brian G. Thomas, 1984 .

Mold behavior and its influence on quality in the continuous casting of steel slabs: Part i. Industrial trials, mold temperature measurements, and mathematical modeling

I. V. Samarasekera, J. K. Brimacombe, N. Walker, 1991 .

Mould heat transfer and continuously cast billet quality with mould flux lubrication Part 1 Mould heat transfer

I. V. Samarasekera, I. Samarasekera, C.A.M. Pinheiro, 2000 .

ANALYSIS OF THERMAL AND MECHANICAL BEHAVIOR OF COPPER MOULD DURING THIN SLAB CASTING

I. V. Samarasekera, Brian G. Thomas, B. Thomas, 2000 .

Calculation of the shear stress distribution in LEC gallium arsenide for different growth conditions

I. Samarasekera, C. Schvezov, F. Weinberg, 1988 .

High speed continuous casting of steel billets: Part 1: General overview

I. Samarasekera, C. Chow, 2002 .

Calculation of the thermal and stress fields in LEC gallium arsenide after separation from the melt

I. Samarasekera, C. Schvezov, F. Weinberg, 1988 .

Experimental Study and Calculation of Boiling Heat Transfer on Steel Plates During Runout Table Operation

I. Samarasekera, Z. D. Liu, D. Fraser, 2002 .

Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part I. Microstructural evolution

J. Brimacombe, D. Lloyd, I. Samarasekera, 1998 .

Modeling the formation of longitudinal facial cracks during continuous casting of hypoperitectic steel

J. Brimacombe, I. Samarasekera, M. Militzer, 2002 .

Growth of lithium triborate crystals. II. Experimental results

I. Samarasekera, F. Weinberg, B. Lent, 1996 .

Growth of lithium triborate crystals. I. Mathematical model

I. Samarasekera, F. Weinberg, C. Parfeniuk, 1996 .

Thermal and mechanical behavior of copper molds during thin-slab casting (II): Mold crack formation

I. V. Samarasekera, Brian G. Thomas, B. Thomas, 2002 .

Thermal and mechanical behavior of copper molds during thin-slab casting (I): Plant trial and mathematical modeling

Brian G. Thomas, B. Thomas, I. Samarasekera, 2002 .

The Formation of Panel Cracks in Steel Ingots: A State-of-the-Art Review I. Hot Ductility of Steel

I. V. Samarasekera, Brian G. Thomas, B. Thomas, 1986 .

The thermal and metallurgical state of steel strip during hot rolling: Part III. Microstructural evolution

I. V. Samarasekera, I. Samarasekera, E. B. Hawbolt, 1991 .

Modelling thermal and microstructural evolution on runout table of hot strip mill

I. Samarasekera, A. Kumar, E. B. Hawbolt, 1991 .

Mathematical model of phase transformations and elastoplastic stress in the water spray quenching of steel bars

I. V. Samarasekera, J. K. Brimacombe, Y. Nagasaka, 1993 .

Measured critical resolved shear stress and calculated temperature and stress fields during growth of CdZnTe

I. Samarasekera, C. Schvezov, F. Weinberg, 1992 .

Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part II. Textural evolution

I. V. Samarasekera, J. K. Brimacombe, J. Brimacombe, 1998 .

Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part III. Overall model development and validation

I. V. Samarasekera, J. K. Brimacombe, David James Lloyd, 1998 .

Investigation of panel crack formation in steel ingots: Part II. Off-corner panel cracks

B. Thomas, J. Brimacombe, I. Samarasekera, 1988 .

Mathematical modeling of thermal stresses in basic oxygen furnace hood tubes

I. Samarasekera, 1985 .

Semiconductor and optical crystal growth

I. Samarasekera, F. Weinberg, C. Parfeniuk, 1995 .

The effect of crystal radius fluctuations on the stress field in LEC gallium arsenide

I. Samarasekera, C. Schvezov, F. Weinberg, 1987 .

Mathematical modelling of the liquid encapsulated czochralski growth of gallium arsenide. I. Heat flow model

I. Samarasekera, C. Schvezov, F. Weinberg, 1987 .

Heat transfer and microstructure during the early stages of metal solidification

J. K. Brimacombe, J. Brimacombe, I. Samarasekera, 1995 .

Experimental Observations and Modelling of Thermal Historywithin a Steel Plate During Water Jet Impingement

I. Samarasekera, Z. D. Liu, D. Fraser, 2002 .

Temperature and stress field calculations in indium phosphide during LEC growth

I. Samarasekera, C. Schvezov, F. Weinberg, 1989 .

Ingenuity and innovation—The hallmarks of Brimacombe’s pioneering contributions to process engineering

I. Samarasekera, 2002 .

Heat flow, solidification and crack formation

J. K. Brimacombe, J. Brimacombe, I. Samarasekera, 1984 .

The Thermal Field in Continuous-Casting Moulds

I. V. Samarasekera, J. K. Brimacombe, J. Brimacombe, 1979 .

Application of microstructural engineering to the processing of lightweight materials

J. Brimacombe, I. Samarasekera, M. Wells, 1995 .

Roll-bite deformation during the hot rolling of steel strip

I. V. Samarasekera, A. Kumar, I. Samarasekera, 1992 .

The thermal and metallurgical state of steel strip during hot rolling: Part II. Factors influencing rolling loads

I. V. Samarasekera, D. Baragar, I. Samarasekera, 1991 .

Heat transfer in the hot rolling of metals

J. K. Brimacombe, J. Brimacombe, I. Samarasekera, 1995 .

The thermal and metallurgical state of steel strip during hot rolling: Part I. Characterization of heat transfer

I. V. Samarasekera, I. Samarasekera, E. B. Hawbolt, 1991 .

Fundamental phenomena governing heat transfer during rolling

I. V. Samarasekera, I. Samarasekera, E. B. Hawbolt, 1993, Metallurgical and Materials Transactions A.

Centerline porosity in plate castings

I. V. Samarasekera, F. Weinberg, I. Samarasekera, 1985 .

Comparisons between sulfide flash smelting and coal combustion—with implications for the flash smelting of high-grade concentrate

T. R. Meadowcroft, J. Grace, I. Samarasekera, 2000 .

Evolution or revolution?—a new era in billet casting

J. Brimacombe, I. Samarasekera, 1999 .

Experimental study of boiling heat transfer during subcooled water jet impingement on flat steel surface

D. Fraser, I. Samarasekera, V. Prodanovic, 2004 .

Analysis of thermomechanical behaviour in billet casting with different mould corner radii

I. V. Samarasekera, Brian G. Thomas, Joong Kil Park, 2002 .

Development of intelligent mould for online detection of defects in steel billets

I. V. Samarasekera, J. K. Brimacombe, J. A. Meech, 1999 .

Mathematical modeling of the extrusion of 6061/Al2O3/20p composite

I. V. Samarasekera, J. K. Brimacombe, Chris Huw John Davies, 1996 .

Heat-transfer phenomena in water-cooled zinc-fuming furnace jackets

I. Samarasekera, G. Richards, K. E. Scholey, 1991 .

Thermal stress failure of water-cooled zinc fuming furnace jackets

I. Samarasekera, G. Richards, K. E. Scholey, 1994 .

Mould−strand interaction in continuous casting of steel billets. II: Lubrication and oscillation mark formation

I. A. Bakshi, I. V. Samarasekera, J. K. Brimacombe, 1993 .

High speed continuous casting of steel billets: Part 2: Mould heat transfer and mould design

I. V. Samarasekera, G. Lockhart, I. Samarasekera, 2002 .

Mold behavior and its influence on quality in the continuous casting of steel slabs: Part II. Mold heat transfer, mold flux behavior, formation of oscillation marks, longitudinal off-corner depressions, and subsurface cracks

I. V. Samarasekera, J. K. Brimacombe, I. Samarasekera, 1991 .

The influence of mold behavior on the production of continuously cast steel billets

I. V. Samarasekera, J. K. Brimacombe, I. Samarasekera, 1982 .

Constitutive behaviour of composites of AA6061 and alumina

J. K. Brimacombe, C. Davies, I. Samarasekera, 1997 .