Sam Coppieters

发表

Analytical method to predict the pull-out strength of clinched connections

Dimitri Debruyne, Hugo Sol, P. Van Houtte, 2012 .

Finite element modeling of clinched connections

Dimitri Debruyne, Sam Coppieters, Steven Cooreman, 2008 .

Advanced FE model validation of cold-forming process using DIC: Air bending of high strength steel

Dimitri Debruyne, Sam Coppieters, S. Gothivarekar, 2020 .

Basics of commercial available correlation measurements systems

Sam Coppieters, Steven Cooreman, Filip De Bal, 2007 .

On the numerical prediction of the torque-to-turn-value of a blind rivet nut

Dimitri Debruyne, Sam Coppieters, A. Van de Velde, 2020 .

Computer Simulation and Experiments to Evaluate Digital Image Correlation Methods

Sven Bossuyt, Hugo Sol, John Vantomme, 2007 .

Modeling strategy for clinched joints in assemblies

Dimitri Debruyne, Sam Coppieters, Andreas Breda, 2016 .

Optimization of clinched connections with the aid of finite element techniques

Dimitri Debruyne, Hugo Sol, Sam Coppieters, 2008 .

Stress concentration factor determination in the classroom with digital image correlation via a basic webcam setup

Dimitri Debruyne, Paul Van Houtte, Sam Coppieters, 2012 .

Equivalent modelling strategy for a clinched joint using a simple calibration method

Dimitri Debruyne, Sam Coppieters, Andreas Breda, 2017 .

Reproducing the experimental torque-to-turn resistance of blind rivet nuts using FEA

Dimitri Debruyne, Sam Coppieters, Arne Van de Velde, 2017 .

Identification of Post-Necking Hardening Behaviour of Sheet Metal: Influence of the Yield Function

Dimitri Debruyne, Sam Coppieters, Toshihiko Kuwabara, 2011 .

Modeling bolted connections with FEA

Dimitri Debruyne, Sam Coppieters, J Schelstraete, 2005 .

Numerical prediction of the stress state in CFRP induced by installing a blind rivet nut

Dimitri Debruyne, Sam Coppieters, Arne Van de Velde, 2021 .

Measuring Strain Concentrations in Welded Junctions using Digital Image Correlation

Sam Coppieters, Jesus Ángel Pérez Fernández, Enrique Alcalá Fazio, 2014 .

Assessment of measuring errors in DIC using deformation fields generated by plastic FEA

Dimitri Debruyne, Sam Coppieters, Pascal Lava, 2009 .

Error estimation in measuring strain fields with DIC on planar sheet metal specimens with a non-perpendicular camera alignment

Y. Wang, Dimitri Debruyne, P. Van Houtte, 2011 .

Impact of lens distortions on strain measurements obtained with 2D digital image correlation

Y. Wang, Dimitri Debruyne, W. Van Paepegem, 2013 .

Parameter identification for anisotropic plasticity model using digital image correlation

Dimitri Debruyne, Hugo Sol, John Vantomme, 2009 .

Digital image correlation in the classroom: Determining stress concentration factors with webcams

Dimitri Debruyne, P. Van Houtte, Sam Coppieters, 2014, Experimental Techniques.

Numerical and experimental study of the multi-axial quasi-static strength of clinched connections

Dimitri Debruyne, Hugo Sol, Paul Van Houtte, 2013 .

Identification of the post-necking hardening behaviour of sheet metal by comparison of the internal and external work in the necking zone

Dimitri Debruyne, Hugo Sol, P. Van Houtte, 2011 .

Reproducing the experimental pull-out and shear strength of clinched sheet metal connections using FEA

Dimitri Debruyne, Hugo Sol, Paul Van Houtte, 2011 .

Assessment of Measuring Errors in Strain Fields Obtained via DIC on Planar Sheet Metal Specimens with a Non-Perpendicular Camera Alignment

Dimitri Debruyne, Sam Coppieters, Pascal Lava, 2011 .

Process-induced bottom defects in clinch forming: Simulation and effect on the structural integrity of single shear lap specimens

Dimitri Debruyne, Sam Coppieters, Andreas Breda, 2017 .

Application of a Multi‐Camera Stereo DIC Set‐up to Assess Strain Fields in an Erichsen Test: Methodology and Validation

Dimitri Debruyne, Paul Van Houtte, Sam Coppieters, 2013 .

Investigation of the Uncertainty of DIC Under Heterogeneous Strain States with Numerical Tests

Y. Wang, Dimitri Debruyne, P. Van Houtte, 2012 .