Abul Fazal M. Arif

发表

Optimization of Pipe Repair Sleeve Design

Abul Fazal M. Arif, Yagoub N. Al-Nassar, H. Al-Qahtani, 2011 .

Monte Carlo simulation of extrusion die life

Abul Fazal M. Arif, Tasneem Pervez, Sayyad Zahid Qamar, 2008 .

Estimation of Residual Stress in Spiral Welded Pipe: Regression and Numerical Model

Abul Fazal M. Arif, Yagoub N. Al-Nassar, Anwar Khalil Sheikh, 2012 .

Non-Dimensional Finite Element Formulation for Thermal Problems

Abul Fazal M. Arif, Syed M. Zubair, Sulaman Pashah, 2012 .

Reliability and performance evaluation of extrusion dies

Abul Fazal M. Arif, Anwar Khalil Sheikh, Muhammad Younas, 2011 .

Sensitivity analysis in life prediction of extrusion dies

Abul Fazal M. Arif, Tasneem Pervez, Sayyad Zahid Qamar, 2007 .

Study of Combined Heat and Mass Transfer From Fins Using Non-Dimensional Finite Element Formulation

Abul Fazal M. Arif, Syed M. Zubair, Sulaman Pashah, 2013 .

Electrical, thermal and structural performance of a cooled PV module: Transient analysis using a multiphysics model

Abul Fazal M. Arif, M. U. Siddiqui, A. Arif, 2013 .

Optimization of Pipe Repair Sleeve Design

Abul Fazal M. Arif, Yagoub N. Al-Nassar, H. Al-Qahtani, 2012 .

Effect of Geometry, Material, and Pressure Variability on Strain and Stress Fields in Dented Pipelines Under Static and Cyclic Pressure Loading Using Probabilistic Analysis

Abul Fazal M. Arif, Husain Mohammed Al-Muslim, 2011 .

Optimized Bands: A New Design Concept for Concentrating Solar Parabolic Mirrors

Andrés Kecskeméthy, Steven Dubowsky, Abul Fazal M. Arif, 2011 .

Impact of Repeated Nitriding Cycles on Extrusion Die Life—Some Statistical and Metallurgical Observations

Abul Fazal M. Arif, Anwar Khalil Sheikh, Muhammad Younas, 2008 .

On the use of non-linear finite element analysis in deformation evaluation and development of design charts for extrusion processes

Abul Fazal M. Arif, 2003 .

Effect of Geometry, Material and Pressure Variability on Strain and Stress Fields in Dented Pipelines Under Static and Cyclic Pressure Loading Using Probability Analysis

Abul Fazal M. Arif, Husain Mohammed Al-Muslim, 2010 .

A probabilistic study of failures of solid and hollow dies in hot aluminum extrusion

Abul Fazal M. Arif, Sayyad Zahid Qamar, Anwar Khalil Sheikh, 2004 .

ANN prediction model for composite plates against low velocity impact loads using finite element analysis

Abul Fazal M. Arif, Muhammad Haris Malik, A. Arif, 2013 .

On the feasibility of community-scale photovoltaic-powered reverse osmosis desalination systems for remote locations

Abul Fazal M. Arif, Steven Dubowsky, Amy M. Bilton, 2011 .

Defining Shape Complexity of Extrusion Dies—A Reliabilistic View

Abul Fazal M. Arif, Tasneem Pervez, Anwar Khalil Sheikh, 2007 .

Fatigue Failure of Extrusion Dies: Effect of Process Parameters and Design Features on Die Life

Abul Fazal M. Arif, Syed Sohail Akhtar, A. Arif, 2010 .

Finite Element Modeling and Analysis of Photovoltaic Modules

Abul Fazal M. Arif, M. U. Siddiqui, Osama Hasan, 2012 .

Using Monte Carlo Simulation for Prediction of Tool Life

Abul Fazal M. Arif, Tasneem Pervez, Sayyad Zahid Qamar, 2011 .

Integrity Assessment of Multiple Dents in Oil and Gas Pipelines Using Probabilistic Design Analysis

Abul Fazal M. Arif, Husain Mohammed Al-Muslim, 2010 .

Integrity Assessment of Interaction of Dents With Residual Stresses of Welds Using Probabilistic Design Analysis

Abul Fazal M. Arif, Husain Mohammed Al-Muslim, 2012 .

Effect of Al-6063 Billet Quality on the Service Life of Hot Extrusion Die: Metallurgical and Statistical Investigation

Abul Fazal M. Arif, Anwar Khalil Sheikh, Syed Sohail Akhtar, 2009 .

A Novel Approach for Designing Parabolic Mirrors Using Optimized Compliant Bands

Andrés Kecskeméthy, Steven Dubowsky, Abul Fazal M. Arif, 2011 .

An improved electric circuit model for photovoltaic modules based on sensitivity analysis

Steven Dubowsky, Abul Fazal M. Arif, Moustafa Elshafei, 2013 .

A Global Collaborative Effort to Enhance Design in a Mechanical Engineering Curriculum in Saudi Arabia

Maria C. Yang, A. N. Shuaib, Abul Fazal M. Arif, 2010 .

Experimental and Numerical Investigations on the Mechanical Characteristics of Carbon Fiber Sensors

Abul Fazal M. Arif, Salem Bashmal, Mohammed Siddiqui, 2017, Sensors.

Effect of Changing Atmospheric and Operating Conditions on the Thermal Stresses in PV Modules

Abul Fazal M. Arif, M. U. Siddiqui, 2012 .

A family of integration algorithms for constitutive equations in finite deformation elasto‐viscoplasticity

Abul Fazal M. Arif, Nicholas Zabaras, N. Zabaras, 1992 .

Finite element simulation of the effect of Al‐6063 billet quality on the extrusion die performance

Abul Fazal M. Arif, Bekir Sami Yilbas, Syed Sohail Akhtar, 2013 .

Regression-based CVN–KIC Models for hot work tool steels

Abul Fazal M. Arif, Tasneem Pervez, Sayyad Zahid Qamar, 2006 .

Analysis of Product Defects in a Typical Aluminum Extrusion Facility

Abul Fazal M. Arif, Sayyad Zahid Qamar, Anwar Khalil Sheikh, 2004 .

Laser control melting of alumina surfaces and thermal stress analysis

Abul Fazal M. Arif, Bekir Sami Yilbas, B. Yilbas, 2011 .

Finite element evaluation of clearance effect on tube-to-tubesheet joint strength

Nesar Merah, A. N. Shuaib, Abul Fazal M. Arif, 2003 .

Investigation of residual stress development in spiral welded pipe

Abul Fazal M. Arif, M. Anis, Khalid Nasim, 2015 .

A new definition of shape complexity for metal extrusion

Abul Fazal M. Arif, Sayyad Zahid Qamar, Anwar Khalil Sheikh, 2004 .

Shape Optimized Heliostats Using a Tailored Stiffness Approach

Steven Dubowsky, Abul Fazal M. Arif, Zheng You, 2014 .

Laser cutting of thick sheet metals : Residual stress analysis

Abul Fazal M. Arif, Bekir Sami Yilbas, B. Yilbas, 2009 .

PERFORMANCE AND LIFE PREDICTION MODEL FOR PHOTOVOLTAIC MODULE: EFFECT OF ENCAPSULANT CONSTITUTIVE BEHAVIOR

Abul Fazal M. Arif, Osama Hasan, A. Arif, 2014 .

Performance of a finite element procedure for hyperelastic-viscoplastic large deformation problems

Abul Fazal M. Arif, Tasneem Pervez, T. Pervez, 2000 .

The impact of fin profile and interface condition on performance characteristics of heat sinks

Abul Fazal M. Arif, Syed M. Zubair, Sulaman Pashah, 2013 .

Roll deformation and stress distribution under thermo-mechanical loading in cold rolling

Abul Fazal M. Arif, Anwar Khalil Sheikh, Ovaisullah Khan, 2004 .

A study of die failure mechanisms in aluminum extrusion

Abul Fazal M. Arif, Sayyad Zahid Qamar, Anwar Khalil Sheikh, 2003 .

VARIATION OF PRESSURE WITH RAM SPEED AND DIE PROFILE IN HOT EXTRUSION OF ALUMINUM-6063

Abul Fazal M. Arif, Sayyad Zahid Qamar, Anwar Khalil Sheikh, 2001 .

Cemented carbide cutting tool: Laser processing and thermal stress analysis

Abul Fazal M. Arif, Bekir Sami Yilbas, B. Yilbas, 2007 .

Laser short-pulse heating with time-varying intensity and thermal stress development in the lattice subsystem

Abul Fazal M. Arif, Bekir Sami Yilbas, A. Arif, 2005 .